APT2012YCAlternatives & Equivalent Parts
About APT2012YC
APT2012YC is a LED component manufactured by Kingbright. It comes in a LEDs Chip package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 5 alternatives for APT2012YC — response within 24 hours.
Specification Comparison
| Parameter | APT2012YCSource | ABM3-12.000MHZ-D2Y-T | 26-01-3115 | XPL2010-222MLC | TPIC6B595N | INA128UA/2K5 |
|---|---|---|---|---|---|---|
| Manufacturer | Kingbright | ABRACON | Molex | COILCRAFT | Texas Instruments | Texas Instruments |
| Package Type | LEDs Chip | Other | Other | Other | Dual-In-Line Packages | Small Outline Packages |
| Pin Count | 2 | 2 | 4 | 2 | 20 | 8 |
| Temperature Range | — | -40.0°C ~ 85.0°C | -40.0°C ~ 105.0°C | -40.0°C ~ 125.0°C | -40.0°C ~ 125.0°C | -40.0°C ~ 125.0°C |
| Price | $0.0351 | $0.1720 | $0.4900 | — | $0.9113 | $1.3896 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | TRANSFERRED | ACTIVE | ACTIVE | NOT RECOMMENDED | NOT RECOMMENDED | ACTIVE |
| Electrical Parameters | ||||||
| Pbfree Code | Yes | No | — | Yes | Yes | Yes |
| YTEOL | 7 | 7.05 | 6.87 | 3 | 15 | 15 |
| Factory Lead Time | — | 10 Weeks | — | — | — | — |
| Additional Feature | — | AT-CUT CRYSTAL; TAPE AND REEL | POLARIZED | — | — | — |
| Aging | — | 5 PPM/FIRST YEAR | — | — | — | — |
| Crystal/Resonator Type | — | PARALLEL - FUNDAMENTAL | — | — | — | — |
| Drive Level | — | 10 µW | — | — | — | — |
| Frequency Stability | — | 0.003% | — | — | — | — |
| Frequency Tolerance | — | 20 ppm | — | — | — | — |
| JESD-609 Code | — | e4 | e3 | — | e4 | e4 |
| Load Capacitance | — | 18 pF | — | — | — | — |
| Mounting Feature | — | SURFACE MOUNT | — | — | — | — |
| Operating Frequency-Nom | — | 12 MHz | — | — | — | — |
| Physical Dimension | — | L5.0XB3.2XH1.3 (mm)/L0.197XB0.126XH0.051 (inch) | — | — | — | — |
| Series Resistance | — | 60 Ω | — | — | — | — |
| Surface Mount | — | YES | — | YES | NO | YES |
| Terminal Finish | — | Nickel/Gold (Ni/Au) | — | — | Nickel/Palladium/Gold (Ni/Pd/Au) | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Connector Type | — | — | RECTANGULAR POWER CONNECTOR | — | — | — |
| Contact Finish Mating | — | — | NOT SPECIFIED | — | — | — |
| Contact Finish Termination | — | — | Matte Tin (Sn) | — | — | — |
| Contact Gender | — | — | MALE | — | — | — |
| Contact Material | — | — | BRASS | — | — | — |
| Contact Style | — | — | SQ PIN-SKT | — | — | — |
| DIN Conformance | — | — | NO | — | — | — |
| Empty Shell | — | — | NO | — | — | — |
| Filter Feature | — | — | NO | — | — | — |
| IEC Conformance | — | — | NO | — | — | — |
| Insulator Material | — | — | POLYAMIDE66 | — | — | — |
| MIL Conformance | — | — | NO | — | — | — |
| Mating Information | — | — | MULTIPLE MATING PARTS AVAILABLE | — | — | — |
| Mixed Contacts | — | — | NO | — | — | — |
| Mounting Type | — | — | BOARD | — | — | — |
| Option | — | — | GENERAL PURPOSE | — | — | — |
| Termination Type | — | — | SOLDER | — | — | — |
| Total Number of Contacts | — | — | 4 | — | — | — |
| UL Flammability Code | — | — | 94V-2 | — | — | — |
| Case/Size Code | — | — | — | 0808 | — | — |
| Construction | — | — | — | Shielded | — | — |
| Core Material | — | — | — | COMPOSITE | — | — |
| DC Resistance | — | — | — | 0.173 Ω | — | — |
| Inductance-Nom (L) | — | — | — | 2.2 µH | — | — |
| Inductor Application | — | — | — | POWER INDUCTOR | — | — |
| Inductor Type | — | — | — | GENERAL PURPOSE INDUCTOR | — | — |
| Number of Functions | — | — | — | 1 | 1 | 1 |
| Package Height | — | — | — | 1 mm | — | — |
| Package Length | — | — | — | 2 mm | — | — |
| Package Style | — | — | — | SMT | IN-LINE | SMALL OUTLINE |
| Package Width | — | — | — | 1.9 mm | — | — |
| Packing Method | — | — | — | TR, Embossed Plastic, 7 Inch | — | TR |
| Rated Current-Max | — | — | — | 1.3 A | — | — |
| Reference Standard | — | — | — | AEC-Q200 | — | — |
| Self Resonance Frequency | — | — | — | 75 MHz | — | — |
| Shape/Size Description | — | — | — | RECTANGULAR PACKAGE | — | — |
| Shielded | — | — | — | YES | — | — |
| Terminal Placement | — | — | — | DUAL ENDED | — | — |
| Terminal Shape | — | — | — | ONE SURFACE | — | — |
| Test Frequency | — | — | — | 1 MHz | — | — |
| Tolerance | — | — | — | 20% | — | — |
| Built-in Protections | — | — | — | — | TRANSIENT | — |
| Driver Number of Bits | — | — | — | — | 8 | — |
| Input Characteristics | — | — | — | — | STANDARD | — |
| Interface IC Type | — | — | — | — | REGISTER BASED PERIPHERAL DRIVER | — |
| JESD-30 Code | — | — | — | — | R-PDIP-T20 | R-PDSO-G8 |
| Number of Channels | — | — | — | — | 8 | — |
| Output Characteristics | — | — | — | — | OPEN-DRAIN | — |
| Output Current Flow Direction | — | — | — | — | SINK | — |
| Output Current-Max | — | — | — | — | 0.15 A | — |
| Output Peak Current Limit-Nom | — | — | — | — | 0.5 A | — |
| Output Polarity | — | — | — | — | TRUE | — |
| Package Body Material | — | — | — | — | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Equivalence Code | — | — | — | — | DIP20,.3 | SOP8,.25 |
| Package Shape | — | — | — | — | RECTANGULAR | RECTANGULAR |
| Qualification Status | — | — | — | — | Not Qualified | Not Qualified |
| Supply Current-Max | — | — | — | — | 0.3 mA | 0.75 mA |
| Supply Voltage-Max | — | — | — | — | 5.5 V | — |
| Supply Voltage-Min | — | — | — | — | 4.5 V | — |
| Supply Voltage-Nom | — | — | — | — | 5 V | — |
| Technology | — | — | — | — | BIPOLAR | BIPOLAR |
| Temperature Grade | — | — | — | — | AUTOMOTIVE | AUTOMOTIVE |
| Terminal Form | — | — | — | — | THROUGH-HOLE | GULL WING |
| Terminal Pitch | — | — | — | — | 2.54 mm | 1.27 mm |
| Terminal Position | — | — | — | — | DUAL | DUAL |
| Turn-off Time | — | — | — | — | -0.09 µs | — |
| Turn-on Time | — | — | — | — | 0.15 µs | — |
| Amplifier Type | — | — | — | — | — | INSTRUMENTATION AMPLIFIER |
| Average Bias Current-Max (IIB) | — | — | — | — | — | 0.01 µA |
| Bandwidth (3dB)-Nom | — | — | — | — | — | 1.3 MHz |
| Bias Current-Max (IIB) @25C | — | — | — | — | — | 0.005 µA |
| Common-mode Reject Ratio-Min | — | — | — | — | — | 120 dB |
| Input Offset Current-Max (IIO) | — | — | — | — | — | 0.01 µA |
| Input Offset Voltage-Max | — | — | — | — | — | 50 µV |
| Neg Supply Voltage Limit-Max | — | — | — | — | — | -18 V |
| Neg Supply Voltage-Nom (Vsup) | — | — | — | — | — | -15 V |
| Non-linearity-Max | — | — | — | — | — | 0.004% |
| Peak Reflow Temperature (Cel) | — | — | — | — | — | 260 |
| Slew Rate-Nom | — | — | — | — | — | 4 V/us |
| Subcategory | — | — | — | — | — | Instrumentation Amplifier |
| Supply Voltage Limit-Max | — | — | — | — | — | 18 V |
| Supply Voltage-Nom (Vsup) | — | — | — | — | — | 15 V |
| Time@Peak Reflow Temperature-Max (s) | — | — | — | — | — | 30 |
| Voltage Gain-Max | — | — | — | — | — | 10000 |
| Voltage Gain-Min | — | — | — | — | — | 1 |
| Voltage Gain-Nom | — | — | — | — | — | 10 |
| ## INA128UA/2K5 Alternates Showing results | — | — | — | — | — | Image |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 5 alternatives for APT2012YC — response within 24 hours.
Quick Links
suggested
suggested
suggested
suggested
suggested
Why Look for Alternatives?
Finding alternatives for APT2012YC is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating APT2012YC replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for APT2012YC. Get expert recommendations within 24 hours.
FAQ
What is equivalent to APT2012YC?
Known equivalents for APT2012YC include ABM3-12.000MHZ-D2Y-T, 26-01-3115, XPL2010-222MLC. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of APT2012YC?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify APT2012YC alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.