ADS1204IRHBTG4 Texas Instruments Integrated Circuit (Quad Flat No-Lead) In Stock

Texas Instruments ADS1204IRHBTG4 is a quad-channel 16-bit delta-sigma ADC sampling at up to 40 ksps per channel in a 32-pin VQFN package. It accepts a ±2.5 V differential analog input and outputs data via a parallel interface with 0.005% maximum linearity error. Available from stock with worldwide shipping.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
ADS1204IRHBTG4Quad Flat No-Lead
Quick Facts
Manufacturer
Texas Instruments
Package
Quad Flat No-Lead
Pin Count
32
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 105.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ADS1204IRHBTG4?

  • Quad-channel simultaneous 16-bit delta-sigma ADC with 40 ksps per channel for high-density multi-phase current and voltage measurement
  • ±2.5 V differential analog input range with 0.005% maximum linearity error enabling precision industrial measurement without external signal conditioning
  • Compact 32-pin VQFN with exposed pad for motor drive and power conversion designs requiring low-latency parallel digital output

What is ADS1204IRHBTG4 used for?

The ADS1204IRHBTG4 is tailored for three-phase motor drive and power converter designs where simultaneous 16-bit digitization of multiple current shunt and bus voltage signals is required at 40 ksps. Its quad-channel architecture eliminates the need for multiple single-channel ADCs, saving board space and reducing BOM cost in inverter and servo drive platforms. Industrial power quality analyzers and grid-tied converter control loops also rely on this device for precise, low-latency feedback on all four measurement channels.

What are the specifications of ADS1204IRHBTG4?

YTEOL0
Analog Input Voltage-Max2.5V
Analog Input Voltage-Min-2.5 V
Converter TypeADC, DELTA-SIGMA
JESD-30 CodeS-PQCC-N32
JESD-609 Codee4
Linearity Error-Max (EL)0.005%
Number of Analog In Channels4
Number of Bits16
Number of Functions1
Output Bit CodeBINARY
Output FormatSERIAL
Package Body MaterialPLASTIC/EPOXY
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Sample Rate10MHz
Screening LevelTS 16949
Supply Current-Max30mA
Supply Voltage-Nom5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormNO LEAD
Terminal Pitch0.5mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)30
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 2
ECCN3A991.c.4
HTS Code8542.39.00.30

Where can I find the ADS1204IRHBTG4 datasheet?

ADS1204IRHBTG4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for ADS1204IRHBTG4?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How many ADC channels does the ADS1204IRHBTG4 provide, and can they sample simultaneously?

The ADS1204IRHBTG4 integrates 4 independent delta-sigma ADC channels, each capable of sampling at up to 40 ksps with 16-bit resolution. Simultaneous sampling across all 4 channels eliminates phase skew between current and voltage measurements, which is critical for accurate power calculation in three-phase motor control.

What is the analog input voltage range and linearity performance of the ADS1204IRHBTG4?

The ADS1204IRHBTG4 accepts a differential analog input from -2.5 V to +2.5 V. Its maximum integral nonlinearity error is only 0.005%, equivalent to approximately 3 LSBs at 16-bit resolution, making it suitable for precision industrial measurement systems that demand better than 0.01% total measurement error.

What digital output interface does the ADS1204IRHBTG4 use, and how does it connect to a DSP or FPGA?

The ADS1204IRHBTG4 provides a parallel digital output interface, allowing direct connection to a 16-bit data bus on a DSP or FPGA without additional serial deserializers. This parallel bus reduces data-ready latency compared to SPI-based ADCs, enabling tighter current-control loop closure at 40 ksps sample rates.

Is the ADS1204IRHBTG4 rated for industrial temperature operation?

Yes, the ADS1204IRHBTG4 carries an industrial temperature rating of -40°C to +85°C. The VQFN-32 exposed-pad package assists thermal dissipation, keeping junction temperature within spec even when all 4 ADC channels operate continuously in factory automation or motor drive enclosures with limited airflow.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany