ADM811TARTZ-REEL7Alternatives & Equivalent Parts
About ADM811TARTZ-REEL7
ADM811TARTZ-REEL7 is a Integrated Circuit component manufactured by Analog Devices. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for ADM811TARTZ-REEL7 — response within 24 hours.
Specification Comparison
| Parameter | ADM811TARTZ-REEL7Source | ADP3336ARMZ-REEL7 | EG1271 | TPA6111A2DGNR | ZXTP25040DFHTA |
|---|---|---|---|---|---|
| Manufacturer | Analog Devices | Analog Devices | E-Switch | Texas Instruments | Diodes Inc. |
| Package Type | Other | Small Outline Packages | Other | Small Outline Packages | SOT23 (3-Pin) |
| Pin Count | 4 | 8 | 6 | 8 | 3 |
| Temperature Range | -40.0°C ~ 85.0°C | — | -20.0°C ~ 70.0°C | -40.0°C ~ 85.0°C | -55.0°C ~ 150.0°C |
| Price | $0.7174 | $1.5375 | $0.3800 | $0.6596 | $0.2306 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | NOT RECOMMENDED | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||
| Pbfree Code | No | No | Yes | Yes | Yes |
| Manufacturer Package Code | RA-4 | RM-8 | — | — | — |
| YTEOL | 10 | 3 | 7.48 | 15 | 4 |
| Additional Feature | BAT BUP SW:N;MNL RST:Y;OV DET:N;PW FL IP:N;PW FL IO:N;PW FL OP:N;PRG RST DLY:N;UV DET:N;WD:N;WWD:N | — | ROHS COMPLIANT | — | — |
| Adjustable Threshold | NO | — | — | — | — |
| Analog IC - Other Type | VOLTAGE SUPERVISOR/RESET IC | — | — | — | — |
| JESD-30 Code | R-PDSO-G4 | S-PDSO-G8 | — | S-PDSO-G8 | R-PDSO-G3 |
| JESD-609 Code | e3 | e4 | e4 | e4 | e3 |
| Number of Channels | 1 | — | — | 2 | — |
| Number of Functions | 1 | 1 | — | 1 | — |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | — | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Equivalence Code | TO-253LOW | TSSOP8,.19 | — | TSSOP8,.19 | — |
| Package Shape | RECTANGULAR | SQUARE | — | SQUARE | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | — | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | 260 | 260 | — | 260 | 260 |
| Qualification Status | Not Qualified | Not Qualified | — | Not Qualified | Not Qualified |
| Supply Current-Max (Isup) | 0.01 mA | — | — | — | — |
| Supply Voltage-Max (Vsup) | 5.5 V | — | — | 5.5 V | — |
| Supply Voltage-Min (Vsup) | 1 V | — | — | 2.5 V | — |
| Supply Voltage-Nom (Vsup) | 3.3 V | — | — | — | — |
| Surface Mount | YES | YES | NO | YES | YES |
| Technology | CMOS | BIPOLAR | — | CMOS | — |
| Temperature Grade | INDUSTRIAL | — | — | INDUSTRIAL | — |
| Terminal Finish | Matte Tin (Sn) | Nickel/Palladium/Gold (Ni/Pd/Au) | Silver (Ag) | Nickel/Palladium/Gold (Ni/Pd/Au) | MATTE TIN |
| Terminal Form | GULL WING | GULL WING | — | GULL WING | GULL WING |
| Terminal Pitch | 1.92 mm | 0.65 mm | — | 0.65 mm | — |
| Terminal Position | DUAL | DUAL | — | DUAL | DUAL |
| Threshold Voltage-Nom | +3.08V | — | — | — | — |
| Time@Peak Reflow Temperature-Max (s) | 30 | 30 | — | 30 | 30 |
| ## ADM811TARTZ-REEL7 Alternates Showing results | Image | — | — | — | — |
| Adjustability | — | ADJUSTABLE | — | — | — |
| Dropout Voltage1-Max | — | 0.4 V | — | — | — |
| Dropout Voltage1-Nom | — | 0.2 V | — | — | — |
| Number of Outputs | — | 1 | — | — | — |
| Operating Temperature TJ-Max | — | 125 °C | — | — | — |
| Operating Temperature TJ-Min | — | -40 °C | — | — | — |
| Output Current1-Max | — | 0.5 A | — | — | — |
| Output Voltage1-Max | — | 10 V | — | — | — |
| Output Voltage1-Min | — | 1.5 V | — | — | — |
| Packing Method | — | TR, 7 INCH | — | — | — |
| Regulator Type | — | ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR | — | — | — |
| Actuator Length | — | — | 0.079 inch | — | — |
| Actuator Type | — | — | SLIDE | — | — |
| Body Breadth | — | — | 3.5 mm | — | — |
| Body Height | — | — | 3.5 mm | — | — |
| Body Length or Diameter | — | — | 8.5 mm | — | — |
| Center Contact Material | — | — | COPPER ALLOY | — | — |
| Center Contact Plating | — | — | SILVER | — | — |
| Contact Current(DC)-Max | — | — | 0.3 A | — | — |
| Contact (DC) Max Rating R Load | — | — | 0.3A@30VDC | — | — |
| Contact Resistance | — | — | 0.02 mΩ | — | — |
| Contact Timing | — | — | BREAK-BEFORE-MAKE | — | — |
| Contact Voltage(DC)-Max | — | — | 30 V | — | — |
| Dielectric Withstand Volts | — | — | 500VAC V | — | — |
| Electrical Life | — | — | 10000 Cycle(s) | — | — |
| End Contact Material | — | — | COPPER ALLOY | — | — |
| End Contact Plating | — | — | SILVER | — | — |
| Insulation Resistance | — | — | 100000000 Ω | — | — |
| Mounting Feature | — | — | THROUGH HOLE-STRAIGHT | — | — |
| Number of Positions | — | — | 2 | — | — |
| PCB Hole Count | — | — | 6 | — | — |
| Switch Action | — | — | LATCHED | — | — |
| Switch Function | — | — | SPDT | — | — |
| Switch Type | — | — | SLIDE SWITCH | — | — |
| Terminal Length | — | — | 0.118 inch | — | — |
| Terminal Material | — | — | COPPER ALLOY | — | — |
| Termination Type | — | — | SOLDER | — | — |
| Bandwidth-Nom | — | — | — | 20 kHz | — |
| Consumer IC Type | — | — | — | AUDIO AMPLIFIER | — |
| Gain | — | — | — | 20 dB | — |
| Harmonic Distortion | — | — | — | 0.1% | — |
| Output Power-Nom | — | — | — | 0.15 W | — |
| Supply Current-Max | — | — | — | 3.2 mA | — |
| ## TPA6111A2DGNR Alternates Showing results | — | — | — | Image | — |
| Factory Lead Time | — | — | — | — | 26 Weeks |
| Collector Current-Max (IC) | — | — | — | — | 3 A |
| Collector-Base Capacitance-Max | — | — | — | — | 17.4 pF |
| Collector-Emitter Voltage-Max | — | — | — | — | 40 V |
| Configuration | — | — | — | — | SINGLE |
| DC Current Gain-Min (hFE) | — | — | — | — | 30 |
| Number of Elements | — | — | — | — | 1 |
| Polarity/Channel Type | — | — | — | — | PNP |
| Power Dissipation-Max (Abs) | — | — | — | — | 1.81 W |
| Transistor Application | — | — | — | — | SWITCHING |
| Transistor Element Material | — | — | — | — | SILICON |
| Transition Frequency-Nom (fT) | — | — | — | — | 270 MHz |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for ADM811TARTZ-REEL7 — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for ADM811TARTZ-REEL7 is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating ADM811TARTZ-REEL7 replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for ADM811TARTZ-REEL7. Get expert recommendations within 24 hours.
FAQ
What is equivalent to ADM811TARTZ-REEL7?
Known equivalents for ADM811TARTZ-REEL7 include ADP3336ARMZ-REEL7, EG1271, TPA6111A2DGNR. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of ADM811TARTZ-REEL7?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify ADM811TARTZ-REEL7 alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.