ADM488ARZ Analog Devices Integrated Circuit (Small Outline Packages) In Stock
ADM488ARZ is an Analog Devices RS-422/RS-485 single-channel line transceiver in an SOIC-8 package featuring differential Schmitt trigger inputs and half-duplex operation over data rates up to 10 Mbps. Supports supply voltages from 4.75 V to 5.25 V and operates across -40°C to +85°C. Available from stock with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- ADM488ARZ Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Single-driver, single-receiver half-duplex RS-485/RS-422 transceiver supports data rates up to 10 Mbps
- Differential Schmitt trigger inputs provide 0.2 V hysteresis for high noise immunity on industrial bus lines
- SOIC-8 package (MS-012AA) simplifies drop-in replacement of legacy RS-485 transceivers with standard 1.27 mm pitch
Applications
ADM488ARZ serves industrial automation and building control applications that use RS-485 multi-drop networks spanning up to 1200 m with up to 32 unit loads on a single bus. It is well suited for HVAC controllers, motor drives, and PLCs that require robust half-duplex communication at data rates up to 10 Mbps. The device also fits instrumentation and data acquisition systems where differential signaling must reject common-mode noise of ±7 V.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | R-8 |
| YTEOL | 10 |
| Differential Output | YES |
| Driver Number of Bits | 1 |
| High Level Input Current-Max | 0.000001A |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Interface IC Type | LINE TRANSCEIVER |
| Interface Standard | EIA-422; EIA-485 |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Out Swing-Min | 1.5V |
| Output Low Current-Max | 0.004A |
| Output Polarity | COMPLEMENTARY |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Receive Delay-Max | 2000ns |
| Receiver Number of Bits | 1 |
| Supply Current-Max | 0.074mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 4.5V |
| Supply Voltage-Nom | 5V |
| Supply Voltage1-Max | 5.5V |
| Supply Voltage1-Min | 4.5V |
| Supply Voltage1-Nom | 5V |
| Surface Mount | YES |
| Technology | BICMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Transmit Delay-Max | 2000ns |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Taiwan |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for ADM488ARZ:
Frequently Asked Questions
What maximum data rate does ADM488ARZ support on an RS-485 bus?
ADM488ARZ is rated for data rates up to 10 Mbps on RS-485 and RS-422 buses. At this rate, cable length should be kept below 15 m to maintain signal integrity; at lower rates such as 100 kbps, cable runs of up to 1200 m are achievable with a 120 Ω termination resistor at each end of the bus.
How many RS-485 nodes can share a bus when using ADM488ARZ?
Each ADM488ARZ presents a standard unit load of 1/8, allowing up to 256 devices on a single RS-485 bus segment. In legacy 1-unit-load configurations the limit is 32 nodes. A 120 Ω termination resistor is required at each bus end, and the supply voltage must remain within 4.75 V to 5.25 V for all nodes.
What operating temperature range does ADM488ARZ cover and does it meet industrial standards?
ADM488ARZ operates from -40°C to +85°C, covering the full industrial temperature range. The device is compliant with EIA-422 and EIA-485 interface standards and accepts common-mode voltages of -7 V to +12 V, making it tolerant of the ground potential differences common in factory-floor wiring environments.
Is ADM488ARZ RoHS-compliant and what package does it use?
The ADM488ARZ is specified in the SOIC-8 package (Analog Devices code R-8, JEDEC MS-012AA outline) with a 1.27 mm lead pitch and a body measuring 4.9 mm x 3.9 mm. Note that the Pbfree code for this specific variant is listed as No; engineers requiring a lead-free SOIC-8 RS-485 transceiver should verify the current RoHS status with the distributor at time of purchase.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”