ADF4602BCPZ-RL Analog Devices Integrated Circuit (Other) In Stock
ADF4602BCPZ-RL is a 3G femtocell RF transceiver IC from Analog Devices in a 40-pin LFCSP package operating at 3.3 V nominal supply. It integrates transmit and receive paths for WCDMA/HSPA femtocell base station applications. Available from authorised distributors worldwide with reel packaging.
- Manufacturer
- Analog Devices
- Package
- Other
- Pin Count
- 40
- Lifecycle
- ACTIVE
- Datasheet
- ADF4602BCPZ-RL Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- ?°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Highly integrated 3G WCDMA/HSPA transceiver combining Tx and Rx paths in a single 40-pin LFCSP package
- 3.3 V nominal supply voltage with low-power design optimised for indoor femtocell base station deployments
- Reel packaging (RL suffix) and tape-and-reel form factor supporting automated pick-and-place assembly for volume production
Applications
The ADF4602BCPZ-RL is specifically designed for 3G WCDMA/HSPA femtocell access points deployed in homes, small offices, and enterprise buildings to improve indoor cellular coverage. The integrated transceiver reduces BOM complexity and board area by replacing multiple discrete RF components with a single 40-pin solution operating from a standard 3.3 V rail. Network equipment manufacturers developing enterprise femtocell and picocell base stations targeting 2100 MHz WCDMA bands rely on this device for its compact integration and compliance with 3GPP radio requirements.
Specifications
| Pbfree Code | Yes |
| JESD-30 Code | S-XQCC-N40 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Package Body Material | UNSPECIFIED |
| Package Equivalence Code | LCC40,.24SQ,20 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Qualification Status | Not Qualified |
| Supply Voltage-Nom | 3.3V |
| Surface Mount | YES |
| Telecom IC Type | RF AND BASEBAND CIRCUIT |
| Temperature Grade | OTHER |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| HTS Code | 8542.39.00.01 |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What supply voltage does the ADF4602BCPZ-RL require and how does it fit into femtocell power supply design?
The ADF4602BCPZ-RL operates from a nominal 3.3 V supply. This aligns with standard LDO regulator outputs commonly used in femtocell platform reference designs, removing the need for a separate voltage rail. Decoupling capacitors in the range of 100 nF to 10 uF per supply pin are recommended to suppress RF noise on the power bus.
For a small-office 3G femtocell design, why choose the ADF4602BCPZ-RL over a discrete RF front-end approach?
Integrating the transmit and receive chains into the 40-pin LFCSP package reduces board area by approximately 60% compared to a discrete solution using separate mixer, VGA, and filter ICs. The single-chip approach also lowers BOM count by 15 to 20 components, cutting assembly cost and reducing RF matching complexity in a 2100 MHz WCDMA design.
What does the -RL suffix on ADF4602BCPZ-RL indicate and how does it affect ordering for production?
The -RL suffix designates tape-and-reel packaging, with reels typically containing 250 or 1000 units depending on the distributor's reel configuration. This form factor is required for automated SMD placement machines used in volume PCB assembly. Prototype quantities are sometimes available as cut-tape from authorised distributors, though minimum order quantities may apply.
Which cellular frequency bands and standards is the ADF4602BCPZ-RL designed to support?
The ADF4602BCPZ-RL targets 3G WCDMA and HSPA radio standards as used in Band 1 (2100 MHz) and Band 8 (900 MHz) femtocell deployments. The device integrates the RF transceiver path to meet 3GPP Release 6 and later specifications for femtocell Node B equipment, supporting data rates up to 7.2 Mbps downlink in HSPA mode.
Related Guides
How to Choose a 3528 SMD Indicator LED for Blue Status Lighting: Selection Guide
A practical 3528 SMD indicator LED selection guide using 150141BS73100 and related Wurth 150141 variants for blue status lighting.
Jul 5, 2026
BAS70KFILM Design Guide for Low-Leakage Signal Clamping and RF Detector Inputs
Practical BAS70KFILM design guidance for signal clamps, RF detector inputs, leakage control, capacitance, layout, and sourcing alternatives.
Jul 5, 2026
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”