ADC12D1600CIUT/S7002944 Texas Instruments Integrated Circuit (BGA) In Stock
Texas Instruments ADC12D1600CIUT/S7002944 is a dual 12-bit analog-to-digital converter sampling at up to 1.6 GSPS per channel in a BGA package. Ultra-high sample rate and wide dynamic range support demanding RF, radar, and communications signal capture. Available from stock worldwide with fast shipping.
- Manufacturer
- Texas Instruments
- Package
- BGA
- Pin Count
- 292
- Lifecycle
- ACTIVE
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual-channel 12-bit resolution at up to 1.6 GSPS sample rate enabling simultaneous high-speed digitization of two analog input channels for I/Q demodulation and multi-channel radar receivers
- Ultra-wideband analog input bandwidth supporting RF signal digitization across multiple GHz of spectrum for direct RF sampling in software-defined radio and instrumentation
- BGA package form factor optimized for high-density signal processing boards with short signal paths to FPGAs and DSPs minimizing transmission line losses at GHz frequencies
- High spurious-free dynamic range (SFDR) and low noise floor preserving signal fidelity for spectrum analysis, communications, and electronic warfare applications requiring precise ADC performance
Applications
The ADC12D1600CIUT/S7002944 is designed for high-speed digital receivers in communications infrastructure, radar front-ends, and electronic warfare systems where multi-GHz bandwidth and 12-bit resolution are required simultaneously. Software-defined radio platforms leverage its dual-channel architecture for direct I/Q sampling of broadband RF signals without analog down-conversion stages. It is also used in high-speed oscilloscopes, medical imaging systems, and scientific instrumentation demanding the highest sample rates available in a 12-bit ADC.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for ADC12D1600CIUT/S7002944:
ADC, Proprietary Method, 12-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PBGA292
Frequently Asked Questions
What is the maximum sample rate of the ADC12D1600CIUT/S7002944?
The ADC12D1600CIUT/S7002944 achieves a maximum sample rate of 1.6 GSPS per channel in dual-channel mode, making it one of the fastest 12-bit ADCs available and suitable for digitizing broadband RF signals in radar, communications, and test and measurement applications.
How many ADC channels does the ADC12D1600CIUT/S7002944 provide?
The ADC12D1600CIUT/S7002944 integrates two independent ADC channels, enabling simultaneous sampling of two analog inputs for I/Q signal processing, differential measurements, or multi-antenna receive chains in phased-array radar and MIMO communications systems.
What package does the ADC12D1600CIUT/S7002944 use?
The ADC12D1600CIUT/S7002944 is packaged in a BGA (ball grid array) package, which provides the high pin count and short signal routing paths necessary to handle multi-GHz analog input bandwidths and high-speed digital output buses connecting to FPGAs or other digital processors.
What applications is the ADC12D1600CIUT/S7002944 designed for?
This device targets high-performance applications including software-defined radio, radar signal processing, electronic warfare receivers, high-speed oscilloscopes, and communications base stations where digitizing wideband RF signals at 12-bit resolution and gigasample-per-second rates is essential for system performance.
What FPGA or processor is typically paired with the ADC12D1600CIUT/S7002944?
High-speed FPGAs from Xilinx (AMD) Ultrascale+ and Intel (Altera) Stratix 10 families are commonly paired with the ADC12D1600CIUT/S7002944, as these devices provide the high-speed LVDS or JESD204B serial input interfaces and sufficient DSP resources to process the massive data throughput generated at 1.6 GSPS.
Related Guides
TPS61291DRVR Selection Guide: Low-Quiescent-Current Boost Converters for IoT and Wearables
How to select the TPS61291DRVR and low-Iq boost converters for IoT, wearables, and coin-cell designs. Compares specs, packages, and alternatives from TI, ADI, and Microchip.
May 13, 2026
TMS5704357BZWTQQ1 Selection Guide: Choosing the Right TMS570 Automotive MCU Variant
Compare TMS570 automotive MCU variants by ASIL level, flash, package, and peripherals. Find the right fit from entry-level LQFP to the ASIL-D TMS5704357BZWTQQ1.
May 13, 2026
TI Hercules TMS5704357BZWTQQ1 Design Guide for Automotive ASIL-D and Industrial Functional Safety
Complete integration guide for the TI Hercules TMS5704357BZWTQQ1 dual-core lockstep Cortex-R5F MCU: lockstep CPU, ECC RAM, FlexRay/CAN-FD, and ASIL-D pitfalls.
May 12, 2026
PTN78000WAH Selection Guide: Choosing the Right 1.5 A 36 V Step-Down Power Module
Compare PTN78000WAH against PTN78000WAS, PTN78060WAH, and other 1.5A 36V step-down modules. Covers package, current rating, efficiency, and drop-in replaceability.
May 12, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”