AD6655ABCPZRL7-150 Analog Devices Integrated Circuit (Other) In Stock
AD6655ABCPZRL7-150 is a dual-channel 14-bit IF diversity receiver IC by Analog Devices, sampling at 150 MSPS with integrated DDC and low noise figure for high-dynamic-range receiver designs. Housed in a 64-lead LFCSP package optimized for 3G/4G BTS and software-defined radio applications. From $45.00, in stock, worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Other
- Pin Count
- 64
- Lifecycle
- OBSOLETE
- Datasheet
- AD6655ABCPZRL7-150 Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual-channel 14-bit ADC operating at 150 MSPS for wideband IF sampling in diversity receivers
- Integrated digital downconverter (DDC) reduces external component count and simplifies receiver chain design
- High dynamic range with low noise figure suited for demanding 3G/4G base station RF front-end applications
- 64-lead LFCSP package with exposed pad for enhanced thermal dissipation in high-power RF environments
Applications
The AD6655ABCPZRL7-150 targets high-performance IF diversity receivers in 3G and 4G cellular base station transceivers, where dual-channel 14-bit 150 MSPS sampling enables simultaneous reception on two antennas for improved signal quality. It is also used in software-defined radio platforms and point-to-point microwave link equipment requiring wide instantaneous bandwidth with high spurious-free dynamic range. Military communications and spectrum monitoring systems benefit from its integrated DDC and excellent linearity.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | CP-64-6 |
| YTEOL | 0 |
| JESD-30 Code | S-XQCC-N64 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Package Body Material | UNSPECIFIED |
| Package Equivalence Code | LCC64,.35SQ,20 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Supply Current-Max | 0.805mA |
| Supply Voltage-Nom | 1.8V |
| Surface Mount | YES |
| Telecom IC Type | BASEBAND CIRCUIT |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | 5A991.B |
| HTS Code | 8542.39.00.01 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for AD6655ABCPZRL7-150:
Analog Devices Inc Baseband Circuit
Frequently Asked Questions
What sampling rate and bit resolution does the AD6655ABCPZRL7-150 deliver for IF diversity applications?
The AD6655ABCPZRL7-150 provides dual-channel 14-bit analog-to-digital conversion at 150 MSPS, enabling direct IF sampling of signals up to 75 MHz Nyquist bandwidth. This resolution and speed support high-dynamic-range reception in 3G and 4G base stations with a typical SFDR exceeding 80 dBc.
How does the integrated DDC in AD6655ABCPZRL7-150 simplify base station receiver design?
The on-chip digital downconverter reduces the IF signal to a lower-rate complex baseband stream, eliminating the need for an external FPGA DDC block in many designs. This integration allows engineers to route a manageable data rate via LVDS outputs, reducing PCB complexity and power consumption by approximately 30% compared to external DDC solutions.
When would AD6655ABCPZRL7-150 be chosen over a 12-bit alternative such as AD6645 for a software-defined radio design?
The AD6655ABCPZRL7-150 is preferred when the system noise floor must be kept below -155 dBm/Hz or when blocking interference within a 20 MHz channel must be tolerated while receiving a weak signal, since 2 additional bits of resolution yield roughly 12 dB more dynamic range. The AD6645 at 80 MSPS is sufficient for narrower-band GSM but falls short for wideband LTE and MIMO diversity reception requiring 150 MSPS throughput.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”