ABM3-12.000MHZ-D2Y-TAlternatives & Equivalent Parts
About ABM3-12.000MHZ-D2Y-T
ABM3-12.000MHZ-D2Y-T is a Crystal or Oscillator component manufactured by ABRACON. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 5 alternatives for ABM3-12.000MHZ-D2Y-T — response within 24 hours.
Specification Comparison
| Parameter | ABM3-12.000MHZ-D2Y-TSource | APT2012YC | CD40106BMTG4 | CD74HC4066PWR | AT93C46DN-SH-T | SN74LVC8T245RHLR |
|---|---|---|---|---|---|---|
| Manufacturer | ABRACON | Kingbright | Texas Instruments | Texas Instruments | Microchip | Texas Instruments |
| Package Type | Other | LEDs Chip | Small Outline Packages | Small Outline Packages | Small Outline Packages | Other |
| Pin Count | 2 | 2 | 14 | 14 | 8 | 24 |
| Temperature Range | -40.0°C ~ 85.0°C | — | -55.0°C ~ 125.0°C | -55.0°C ~ 125.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 85.0°C |
| Price | $0.1720 | $0.0351 | $0.1488 | $0.1526 | $0.0973 | $0.2953 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | TRANSFERRED | OBSOLETE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | ||||||
| Pbfree Code | No | Yes | — | Yes | Yes | Yes |
| Factory Lead Time | 10 Weeks | — | — | — | 6 Weeks | — |
| YTEOL | 7.05 | 7 | 0 | 15 | 14 | 15 |
| Additional Feature | AT-CUT CRYSTAL; TAPE AND REEL | — | — | Configuration : 1:1 SPST | CONFIGURABLE AS 128 X 8 | TWO SEPEARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B |
| Aging | 5 PPM/FIRST YEAR | — | — | — | — | — |
| Crystal/Resonator Type | PARALLEL - FUNDAMENTAL | — | — | — | — | — |
| Drive Level | 10 µW | — | — | — | — | — |
| Frequency Stability | 0.003% | — | — | — | — | — |
| Frequency Tolerance | 20 ppm | — | — | — | — | — |
| JESD-609 Code | e4 | — | e4 | e4 | e3 | e4 |
| Load Capacitance | 18 pF | — | — | — | — | — |
| Mounting Feature | SURFACE MOUNT | — | — | — | — | — |
| Operating Frequency-Nom | 12 MHz | — | — | — | — | — |
| Physical Dimension | L5.0XB3.2XH1.3 (mm)/L0.197XB0.126XH0.051 (inch) | — | — | — | — | — |
| Series Resistance | 60 Ω | — | — | — | — | — |
| Surface Mount | YES | — | YES | YES | YES | YES |
| Terminal Finish | Nickel/Gold (Ni/Au) | — | NICKEL PALLADIUM GOLD | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Family | — | — | 4000/14000/40000 | — | — | LVC/LCX/Z |
| JESD-30 Code | — | — | R-PDSO-G14 | R-PDSO-G14 | R-PDSO-G8 | R-PQCC-N24 |
| Logic IC Type | — | — | INVERTER | — | — | BUS TRANSCEIVER |
| Number of Functions | — | — | 6 | 4 | 1 | 1 |
| Number of Inputs | — | — | 1 | — | — | — |
| Package Body Material | — | — | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Equivalence Code | — | — | SOP14,.25 | TSSOP14,.25 | SOP8,.23 | LCC24/28,.14X.2,20 |
| Package Shape | — | — | RECTANGULAR | RECTANGULAR | RECTANGULAR | RECTANGULAR |
| Package Style | — | — | SMALL OUTLINE | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | SMALL OUTLINE | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Packing Method | — | — | TR | — | — | TR |
| Peak Reflow Temperature (Cel) | — | — | 260 | 260 | 260 | 260 |
| Prop. Delay@Nom-Sup | — | — | 280 ns | — | — | 6.3 ns |
| Propagation Delay (tpd) | — | — | 280 ns | — | — | 6.6 ns |
| Qualification Status | — | — | Not Qualified | Not Qualified | Not Qualified | Not Qualified |
| Schmitt Trigger | — | — | YES | — | — | — |
| Supply Voltage-Max (Vsup) | — | — | 18 V | 10 V | 5.5 V | 5.5 V |
| Supply Voltage-Min (Vsup) | — | — | 3 V | 2 V | 4.5 V | 1.08 V |
| Supply Voltage-Nom (Vsup) | — | — | 5 V | 4.5 V | 5 V | 3.3 V |
| Technology | — | — | CMOS | CMOS | CMOS | CMOS |
| Temperature Grade | — | — | MILITARY | MILITARY | INDUSTRIAL | INDUSTRIAL |
| Terminal Form | — | — | GULL WING | GULL WING | GULL WING | NO LEAD |
| Terminal Pitch | — | — | 1.27 mm | 0.65 mm | 1.27 mm | 0.5 mm |
| Terminal Position | — | — | DUAL | DUAL | DUAL | QUAD |
| Time@Peak Reflow Temperature-Max (s) | — | — | 30 | 30 | — | 30 |
| ## CD40106BMTG4 Alternates Showing results | — | — | Image | — | — | — |
| Analog IC - Other Type | — | — | — | SPST | — | — |
| Bandwidth-Nom | — | — | — | 200 MHz | — | — |
| Input Voltage-Max | — | — | — | 10 V | — | — |
| Input Voltage-Min | — | — | — | 2 V | — | — |
| Normal Position | — | — | — | NO | — | — |
| Number of Channels | — | — | — | 4 | — | — |
| Off-state Isolation-Nom | — | — | — | 72 dB | — | — |
| On-state Resistance Match-Nom | — | — | — | 1 Ω | — | — |
| On-state Resistance-Max (Ron) | — | — | — | 95 Ω | — | — |
| Output | — | — | — | SEPARATE OUTPUT | — | — |
| Signal Current-Max | — | — | — | 0.25 A | — | — |
| Supply Current-Max (Isup) | — | — | — | 0.02 mA | — | — |
| Switch-off Time-Max | — | — | — | 45 ns | — | — |
| Switch-on Time-Max | — | — | — | 30 ns | — | — |
| Switching | — | — | — | MAKE-BEFORE-BREAK | — | — |
| ## CD74HC4066PWR Alternates Showing results | — | — | — | Image | — | — |
| Manufacturer Package Code | — | — | — | — | SOIC-8 | — |
| Alternate Memory Width | — | — | — | — | 8 | — |
| Clock Frequency-Max (fCLK) | — | — | — | — | 2 MHz | — |
| Data Retention Time-Min | — | — | — | — | 100 | — |
| Endurance | — | — | — | — | 1000000 Write/Erase Cycles | — |
| Memory Density | — | — | — | — | 1024 bit | — |
| Memory IC Type | — | — | — | — | EEPROM | — |
| Memory Width | — | — | — | — | 16 | — |
| Number of Ports | — | — | — | — | 1 | 2 |
| Number of Words | — | — | — | — | 64 words | — |
| Number of Words Code | — | — | — | — | 64 | — |
| Operating Mode | — | — | — | — | SYNCHRONOUS | — |
| Organization | — | — | — | — | 64X16 | — |
| Output Characteristics | — | — | — | — | 3-STATE | 3-STATE |
| Parallel/Serial | — | — | — | — | SERIAL | — |
| Programming Voltage | — | — | — | — | 5 V | — |
| Serial Bus Type | — | — | — | — | MICROWIRE | — |
| Standby Current-Max | — | — | — | — | 0.000015 A | — |
| Supply Current-Max | — | — | — | — | 0.002 mA | — |
| Write Cycle Time-Max (tWC) | — | — | — | — | 5 ms | — |
| ## AT93C46DN-SH-T Alternates Showing results | — | — | — | — | Image | — |
| Control Type | — | — | — | — | — | COMMON CONTROL |
| Count Direction | — | — | — | — | — | BIDIRECTIONAL |
| Load Capacitance (CL) | — | — | — | — | — | 15 pF |
| Max I(ol) | — | — | — | — | — | 0.032 A |
| Number of Bits | — | — | — | — | — | 8 |
| Output Polarity | — | — | — | — | — | TRUE |
| Power Supply Current-Max (ICC) | — | — | — | — | — | 0.025 mA |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 5 alternatives for ABM3-12.000MHZ-D2Y-T — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for ABM3-12.000MHZ-D2Y-T is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating ABM3-12.000MHZ-D2Y-T replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for ABM3-12.000MHZ-D2Y-T. Get expert recommendations within 24 hours.
FAQ
What is equivalent to ABM3-12.000MHZ-D2Y-T?
Known equivalents for ABM3-12.000MHZ-D2Y-T include APT2012YC, CD40106BMTG4, CD74HC4066PWR. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of ABM3-12.000MHZ-D2Y-T?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify ABM3-12.000MHZ-D2Y-T alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.