74FCT162646CTPVC Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Texas Instruments 74FCT162646CTPVC is a 16-bit non-inverting bus transceiver and register with FCT-compatible CMOS outputs, 3.6 V tolerant inputs, and 56-pin SSOP package for backplane and memory-bus interfacing. From $2.00 in stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified May 2026
Package / Visual Reference
74FCT162646CTPVCSmall Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
56
Lifecycle
ACTIVE
Category
Integrated Circuit
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of 74FCT162646CTPVC?

  • 16-bit non-inverting transceiver with integrated D-type register enables simultaneous latched and transparent data bus operation
  • FCT CMOS outputs drive 25 mA with ±24 mA bus-hold circuitry, eliminating external pull-up or pull-down resistors
  • 3.6 V input-tolerant design supports mixed 3.3 V and 5 V bus interfacing in CPLD and FPGA memory systems

What is 74FCT162646CTPVC used for?

The 74FCT162646CTPVC serves as a bidirectional data bus buffer in DSP memory systems, FPGA I/O expansion boards, and industrial backplane architectures requiring simultaneous 16-bit transceiver and register functions. Its non-inverting transparent and registered modes allow system designers to implement glitch-free address or data latching on heavily loaded PC-board buses running at frequencies up to 100 MHz. The part is also used in legacy VMEbus and CompactPCI systems where TTL-compatible driving strength and bus-hold features simplify board-level signal integrity design.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the 74FCT162646CTPVC datasheet?

74FCT162646CTPVC Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for 74FCT162646CTPVC?

Compatible alternatives and drop-in replacements for 74FCT162646CTPVC:

74FCT162646CTPVCTTexas Instruments

Registered Bus Transceiver, FCT Series, 16-Func, 8-Bit, True Output, CMOS, PDSO56

View Part →
74FCT162646CTPVCG4Texas Instruments

Registered Bus Transceiver, FCT Series, 2-Func, 8-Bit, True Output, CMOS, PDSO56

View Part →
CY74FCT162646CTPVCTexas Instruments

Registered Bus Transceiver, FCT Series, 2-Func, 8-Bit, True Output, CMOS, PDSO56

View Part →

Frequently Asked Questions

How does the integrated register in 74FCT162646CTPVC differ from a plain 16-bit bus transceiver like 74FCT16245?

The 74FCT162646CTPVC combines transceiver and register functions in a single device, allowing the 16-bit data bus to be either passed transparently or latched into an internal D-type register on a clock edge. A plain 74FCT16245 can only buffer data bidirectionally without latching. This saves one additional 16-bit latch IC per bus segment and reduces PCB area by eliminating one SSOP-48 package, which is critical in density-constrained backplane designs.

What drive strength and bus-hold specifications does 74FCT162646CTPVC provide for driving heavily loaded backplane buses?

Each output of the 74FCT162646CTPVC can source or sink 25 mA of continuous current, sufficient to drive 20 to 30 standard TTL loads on a backplane trace. The on-chip bus-hold circuitry holds input pins at their last valid logic state with ±24 mA of holding current, removing the need for external 10 kΩ to 47 kΩ pull-up or pull-down resistors and simplifying PCB routing on 16-bit address and data buses.

Can 74FCT162646CTPVC interface directly between a 3.3 V FPGA I/O bank and a legacy 5 V TTL peripheral bus?

Yes. The 74FCT162646CTPVC features inputs tolerant to 3.6 V, and while its nominal supply is 5 V, the FCT CMOS input thresholds are TTL-compatible so a 3.3 V FPGA driving the control and data inputs will be correctly interpreted. The device's outputs swing to full 5 V TTL levels, allowing a 3.3 V FPGA to drive a 5 V legacy bus segment through the transceiver without requiring a separate level-translation IC. Designers should confirm that 3.3 V FPGA I/O pins are 5 V tolerant before connecting transceiver outputs back into the FPGA.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany