74ACT11543DWRE4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

74ACT11543DWRE4 is an octal registered bus transceiver with 3-state outputs in a 28-pin SOIC package. Supports bidirectional data transfer with independent output enables and a master latch control. From $1.20 in stock with worldwide shipping.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
74ACT11543DWRE4Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
28
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of 74ACT11543DWRE4?

  • Octal registered bidirectional bus transceiver with independent output enable for each data direction
  • Master control latch enables simultaneous transparent-to-register mode switching across all 8 bits
  • ACT-family CMOS logic with 3-state outputs rated for ±24 mA drive current in a 28-pin SOIC package

What is 74ACT11543DWRE4 used for?

74ACT11543DWRE4 is used in data bus buffering and isolation applications where bidirectional registered data transfer is required between two board subsystems. It is particularly effective in CPU-to-peripheral bus bridges, backplane bus drivers, and memory interface circuits where independent direction control and 3-state outputs prevent bus contention.

What are the specifications of 74ACT11543DWRE4?

YTEOL0
Additional FeatureINDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
Count DirectionBIDIRECTIONAL
FamilyACT
JESD-30 CodeR-PDSO-G28
Logic IC TypeREGISTERED BUS TRANSCEIVER
Number of Functions1
Number of Ports2
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP28,.4
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Packing MethodTR
Peak Reflow Temperature (Cel)NOT SPECIFIED
Propagation Delay (tpd)13.2ns
Qualification StatusNot Qualified
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)4.5V
Supply Voltage-Nom (Vsup)5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)NOT SPECIFIED
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
HTS Code8542.39.00.60

Where can I find the 74ACT11543DWRE4 datasheet?

74ACT11543DWRE4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for 74ACT11543DWRE4?

Compatible alternatives and drop-in replacements for 74ACT11543DWRE4:

74ACT11543DWRG4Texas Instruments Registered

Bus Transceiver, ACT Series, 1-Func, CMOS, PDSO28

View Part →
74ACT11543DWRTexas Instruments Registered

Bus Transceiver, ACT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO28

View Part →

Frequently Asked Questions

How does the independent output enable on 74ACT11543DWRE4 differ from a simple bidirectional buffer?

74ACT11543DWRE4 provides separate output-enable pins for each of the two transfer directions, so the A-to-B and B-to-A paths can be independently enabled or tristated. This allows the designer to gate exactly one direction active at a time without external logic, reducing propagation delay by at least 1 gate stage compared to adding discrete enable gates on a simpler 8-bit bidirectional buffer.

What drive strength do the 3-state outputs of 74ACT11543DWRE4 provide for bus loading?

The 3-state outputs of 74ACT11543DWRE4 are rated at ±24 mA sink and source current, enabling it to drive heavily loaded backplane buses with multiple card slots. This drive strength supports bus lines with up to 50 pF load capacitance while still meeting the AC timing specifications of the ACT logic family at 5 V supply.

In which embedded system designs is 74ACT11543DWRE4 preferred over a non-registered transceiver?

74ACT11543DWRE4 is preferred in designs where data must be latched synchronously before being placed onto a shared bus, such as in FPGA-to-memory interfaces, DMA controller outputs, or multi-board backplane systems. The 8-bit registered stage captures data on the clock edge, eliminating glitches on the bus and ensuring setup times of at least 5 ns are met at the receiving device.

What package options and reel availability does 74ACT11543DWRE4 offer for production procurement?

74ACT11543DWRE4 is supplied in a 28-pin SOIC package (300 mil body width) on tape-and-reel with 2500 units per reel, indicated by the 'RE4' suffix. The SOIC-28 footprint with 1.27 mm pitch occupies roughly 18 mm × 7.5 mm of PCB area, making it compatible with standard SMT assembly lines at high volume.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany