416MA201P TE Connectivity Variable Resistor (Other) In Stock
TE Connectivity 416MA201P is a cermet trimmer potentiometer with 200 Ohm resistance and 25% tolerance, rated at 0.2 W with a single-turn vertical screw actuator in a 6.8 × 8.1 × 7.8 mm through-hole package. Features linear resistance law and RoHS-compliant construction for reliable circuit calibration. Available from stock with worldwide shipping.
- Manufacturer
- TE Connectivity
- Package
- Other
- Pin Count
- 3
- Lifecycle
- UNKNOWN
- Datasheet
- 416MA201P Datasheet PDF
- Category
- Variable Resistor
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 200 Ohm cermet element with 0.2 W power rating and linear resistance law provides stable, repeatable trimming for analog calibration circuits
- Single-turn vertical screw actuator in a compact 6.8 × 8.1 × 7.8 mm through-hole package enables easy board-level adjustment with a standard flathead screwdriver
- RoHS-compliant construction with 25% resistance tolerance meets environmental compliance requirements while offering a cost-effective trimmer solution
Applications
The 416MA201P cermet trimmer is commonly used for offset voltage adjustment in op-amp circuits, bias setting in audio amplifier stages, and gain calibration in sensor signal conditioning boards. Its 200 Ohm value suits pull-up network tuning and reference voltage divider trimming in analog front-end designs. The through-hole vertical package allows easy field adjustment during board commissioning and calibration.
Specifications
| Pbfree Code | Yes |
| YTEOL | 0.4 |
| Actuator Orientation | VERTICAL |
| Actuator Type | SCREW |
| Mounting Feature | THROUGH HOLE MOUNT |
| Number of Turns | 1 |
| Package Shape | RECTANGULAR PACKAGE |
| Rated Power Dissipation (P) | 0.2W |
| Resistance | 200Ω |
| Resistance Law | LINEAR |
| Resistor Type | TRIMMER |
| Surface Mount | NO |
| Technology | CERMET |
| Temperature Coefficient | 250ppm/°C |
| Terminal Shape | FLAT |
| Tolerance | 0.2% |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8533.40.80.50 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for 416MA201P:
suggested
suggested
suggested
Frequently Asked Questions
What resistance value and power rating does the 416MA201P provide for analog calibration circuits?
The 416MA201P provides a 200 Ohm resistance with a 25% tolerance and a 0.2 W (1/5 W) power rating, making it suitable for low-power trimming applications such as offset adjustment in op-amp stages and bias calibration in analog sensor signal chains operating below 10 V.
How many turns of adjustment does the 416MA201P require, and how does this single-turn design affect calibration precision?
The 416MA201P uses a single electrical and mechanical turn for its full 200 Ohm range, meaning one full rotation of the vertical screw actuator sweeps the entire resistance span, which offers fast gross adjustment but requires careful hand-turning technique to achieve fine resolution within a narrow target range.
In which PCB assembly scenarios is the through-hole package of 416MA201P preferred over SMD trimmer alternatives?
The 6.8 × 8.1 × 7.8 mm through-hole package of 416MA201P is preferred in prototype boards and low-volume production where hand soldering and field recalibration are expected, as through-hole mounting provides mechanical stability against repeated screw adjustment and avoids the reflow constraints of smaller 3.2 × 1.8 mm SMD trimmers.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About TE Connectivity
TE Connectivity is a leading electronic component manufacturer. FindMyChip sources TE Connectivity ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”