2312-H-RCAlternatives & Equivalent Parts
About 2312-H-RC
2312-H-RC is a Inductor component manufactured by Bourns. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 3 alternatives for 2312-H-RC — response within 24 hours.
Specification Comparison
| Parameter | 2312-H-RCSource | PT65103 | MJD122T4 | IRF4905PBF |
|---|---|---|---|---|
| Manufacturer | Bourns | Apem | STMicroelectronics | Infineon |
| Package Type | Other | Other | Other | Transistor Outline, Vertical |
| Pin Count | 2 | 6 | 3 | 3 |
| Temperature Range | -55.0°C ~ 105.0°C | -20.0°C ~ 70.0°C | ~ 150.0°C | -55.0°C ~ 175.0°C |
| Price | $1.9711 | $2.3800 | $0.2067 | $0.8505 |
| Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | ||||
| Pbfree Code | Yes | Yes | — | — |
| Factory Lead Time | 25 Weeks | — | 14 Weeks | — |
| YTEOL | 7 | 7 | 9 | 5.15 |
| Construction | Hortizontal Mount | — | — | — |
| DC Resistance | 0.037 Ω | — | — | — |
| Inductance-Nom (L) | 100 µH | — | — | — |
| Inductor Application | HIGH CURRENT INDUCTOR | — | — | — |
| Inductor Type | GENERAL PURPOSE INDUCTOR | — | — | — |
| Lead Diameter | 1.0668 mm | — | — | — |
| Lead Spacing | 28.702 mm | — | — | — |
| Number of Functions | 1 | — | — | — |
| Package Diameter | 32.512 mm | — | — | — |
| Package Length | 16.51 mm | — | — | — |
| Package Style | Toroidal | — | SMALL OUTLINE | FLANGE MOUNT |
| Rated Current-Max | 7 A | — | — | — |
| Shape/Size Description | CYLINDRICAL PACKAGE | — | — | — |
| Shielded | YES | — | — | — |
| Surface Mount | NO | NO | YES | NO |
| Terminal Placement | RADIAL | — | — | — |
| Terminal Shape | WIRE | — | — | — |
| Test Frequency | 0.001 MHz | — | — | — |
| Tolerance | 15% | — | — | — |
| Actuator Material | — | NYLON | — | — |
| Actuator Type | — | SCREW DRIVER | — | — |
| Additional Feature | — | O-RING Si RUBBER ACTUATOR SEAL | — | — |
| Body Breadth | — | 10 mm | — | — |
| Body Height | — | 6.5 mm | — | — |
| Body Length or Diameter | — | 10 mm | — | — |
| Center Contact Material | — | PHOSPHOR BRONZE | — | — |
| Center Contact Plating | — | GOLD OVER NICKEL | — | — |
| Contact Current(DC)-Max | — | 0.4 A | — | — |
| Contact (DC) Max Power Rating R Load | — | 1.5VA@24VDC | — | — |
| Contact (DC) Max Rating R Load | — | .4A@24VDC | — | — |
| Contact Function | — | ON-OFF | — | — |
| Contact Resistance | — | 0.08 mΩ | — | — |
| Contact Timing | — | BREAK-BEFORE-MAKE | — | — |
| Contact Voltage(DC)-Max | — | 24 V | — | — |
| Electrical Life | — | 10000 Cycle(s) | — | — |
| End Contact Material | — | PHOSPHOR BRONZE | — | — |
| End Contact Plating | — | GOLD OVER NICKEL | — | — |
| Indexing Angle | — | 22.5 deg | — | — |
| Insulation Resistance | — | 100000000 Ω | — | — |
| Insulator Material | — | THERMOPLASTIC | — | — |
| JESD-609 Code | — | e3 | e3 | e3 |
| Mounting Feature | — | THROUGH HOLE-STRAIGHT | — | — |
| Number of Positions | — | 16 | — | — |
| Number of Switch Sections | — | 1 | — | — |
| PCB Hole Count | — | 6 | — | — |
| Packing Method | — | TUBE | — | — |
| Sealing | — | MOLDED | — | — |
| Solderability | — | WAVE | — | — |
| Switch Action | — | LATCHED | — | — |
| Switch Function | — | BINARY CODED HEXADECIMAL | — | — |
| Switch Type | — | ROTARY CODED SWITCH | — | — |
| Terminal Finish | — | Tin (Sn) | Matte Tin (Sn) - annealed | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Length | — | 0.15 inch | — | — |
| Terminal Material | — | BRASS | — | — |
| Termination Type | — | SOLDER | — | — |
| Washability | — | SOLVENT | — | — |
| Case Connection | — | — | COLLECTOR | DRAIN |
| Collector Current-Max (IC) | — | — | 8 A | — |
| Collector-Emitter Voltage-Max | — | — | 100 V | — |
| Configuration | — | — | DARLINGTON WITH BUILT-IN DIODE AND RESISTOR | SINGLE WITH BUILT-IN DIODE |
| DC Current Gain-Min (hFE) | — | — | 100 | — |
| JEDEC-95 Code | — | — | TO-252 | TO-220AB |
| JESD-30 Code | — | — | R-PSSO-G2 | R-PSFM-T3 |
| Number of Elements | — | — | 1 | 1 |
| Package Body Material | — | — | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Shape | — | — | RECTANGULAR | RECTANGULAR |
| Peak Reflow Temperature (Cel) | — | — | 260 | 250 |
| Polarity/Channel Type | — | — | NPN | P-CHANNEL |
| Power Dissipation Ambient-Max | — | — | 20 W | — |
| Power Dissipation-Max (Abs) | — | — | 20 W | 200 W |
| Qualification Status | — | — | Not Qualified | Not Qualified |
| Terminal Form | — | — | GULL WING | THROUGH-HOLE |
| Terminal Position | — | — | SINGLE | SINGLE |
| Time@Peak Reflow Temperature-Max (s) | — | — | 30 | 30 |
| Transistor Application | — | — | SWITCHING | SWITCHING |
| Transistor Element Material | — | — | SILICON | SILICON |
| VCEsat-Max | — | — | 4 V | — |
| ## MJD122T4 Alternates Showing results | — | — | Image | — |
| Avalanche Energy Rating (Eas) | — | — | — | 930 mJ |
| DS Breakdown Voltage-Min | — | — | — | 55 V |
| Drain Current-Max (ID) | — | — | — | 74 A |
| Drain-source On Resistance-Max | — | — | — | 0.02 Ω |
| FET Technology | — | — | — | METAL-OXIDE SEMICONDUCTOR |
| Feedback Cap-Max (Crss) | — | — | — | 640 pF |
| Operating Mode | — | — | — | ENHANCEMENT MODE |
| Pulsed Drain Current-Max (IDM) | — | — | — | 260 A |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 3 alternatives for 2312-H-RC — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for 2312-H-RC is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating 2312-H-RC replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for 2312-H-RC. Get expert recommendations within 24 hours.
FAQ
What is equivalent to 2312-H-RC?
Known equivalents for 2312-H-RC include PT65103, MJD122T4, IRF4905PBF. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of 2312-H-RC?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify 2312-H-RC alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.