Power Supply

SIP MODULE-3

Switching Voltage Regulators Automotive Qualified 3.5V to 60V, 2A Synchronous Step-Down Voltage Converter 16-HTSSOP -40 to 125

Use the download button to access the TLV76050DBZT schematic symbol, PCB footprint, and 3D model.

TPS3106K33DBVRG4 is a single-channel voltage supervisor and reset IC by Texas Instruments with a fixed 3.3V monitoring threshold. Key specs: fixed threshold monitoring, active-low reset output, SOT-23-6 package. Available from stock with worldwide shipping at competitive pricing.

Stand Alone Single Cell 3-A Fast Charger with High Input Voltage and Power Path

Switching Voltage Regulators Synchronous Buck Regulator

Switching Voltage Regulators 28-V Output Voltage Boost Converter with 1-uA Quiescent Current 12-WSON -40 to 85

TPS54308DDCR is a 3 A, 28 V input synchronous step-down DC-DC converter from Texas Instruments, using current-mode PWM control in a compact 6-pin SOT-23 package. It operates from 4.5 V to 28 V input and regulates outputs down to 0.6 V with high efficiency across the full load range. Available in stock worldwide for industrial, automotive, and portable power supply designs.

LDO Voltage Regulators 500mA Low Dropout CMOS Linear Regulators Stable with Ceramic Output Capacitors 5-SOT-223 -40 to 125

Switching Voltage Regulators 28-V Output Voltage Boost Converter with Power Diode and Isolation Switch 6-SOT-23 -40 to 125

Use the download button to access the TPS621361RGXT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS62136RGXT schematic symbol, PCB footprint, and 3D model.

SOT-223, 6 PIN

High-Efficiency 20-A SWIFT™ Synchronous Buck Converter with Eco-mode™

Automotive 128-Taps Single-Channel Digital Potentiometer With I2C Interface

Low Power Battery Backup IC with Integrated Boost Converter

5.5V, 6A, 14mΩ, Dual Load Switch with Adj. Rise Time & Optional QOD for Cost-Conscious Applications

600mA Fully Integrated, Low Noise Step-Down Converter in MicroSiP(TM) Package

200mA, Low-IQ, Low-Noise, Low-Dropout (LDO) Regulator in Ultra-Small 0.8mm x 0.8mm WCSP

1% High-Accuracy, 1-A, Low-Dropout Regulator with Reverse Current Protection

LM5575Q0MH/NOPB is an automotive 75V, current-mode PWM step-down switching regulator with adjustable output voltage as low as 1.225V. It operates from 6V to 75V input in a 16-pin SOIC package for rugged vehicle power designs.

4.5- to 17-V Input Voltage, 5-A/3-A/2-A Output Current Triple Buck Converter

BiCMOS Low-Power Current Mode PWM Controller

3–17V 1A Step-Down Converter with DCS-Control in 3x3 QFN package

Texas Instruments LM5018SD/NOPB is a wide-input buck switching regulator with 7.5V to 100V input range, constant-on-time voltage-mode control, integrated high-voltage FET, and SOT-23 style no-lead package for industrial point-of-load supplies.

200mA, Low-IQ, Low-Noise, Low-Dropout (LDO) Regulator in Ultra-Small 0.8mm x 0.8mm WCSP

Automotive 40V, 3.5A SIMPLE SWITCHER®, 2.2MHz Step-Down Regulator with 40uA IQ

Conv DC-DC 3V to 17V Step Down Single-Out 5V 1A Automotive 16-Pin VQFN EP T/R

Use the download button to access the TL750L05CDR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the UA78M08CDCYR schematic symbol, PCB footprint, and 3D model.

100-mA ultra-low dropout regulator with shutdown & 1.25% tolerance

Texas Instruments TPS7133QPE4 is a fixed-output PMOS LDO voltage regulator in a DIP-8 package with ultra-low 400mV maximum dropout. It delivers line regulation of 0.027% and load regulation of 0.12% for stable single-output rails. Available from authorized distributors with worldwide shipping.

3V - 17V 3A AUTOMOTIVE Step-Down Converter In 3X3 QFN Package

The TPS610997YFFR is a synchronous boost converter with an ultra-low 800nA quiescent current, accepting a 0.7V to 5.5V input range with a 3.7V nominal rating, housed in a compact 6-pin DSBGA package for battery-powered wearables and IoT devices.

Switching Voltage Regulators TPS6125xA 3.8-MHz, 5-V / 4-A Boost in 1.2-mm x 1.3-mm WCSP

Use the download button to access the TPS563208DDCT schematic symbol, PCB footprint, and 3D model.

TPS54531DDAR is a current-mode PWM step-down switching regulator with 3.5V–28V input range and up to 5A output current. It features adjustable output voltage, high efficiency, and integrated high-side MOSFET. From $1.15, in stock worldwide shipping.

36-V, 1-A, 4-μVRMS, RF LDO Voltage Regulator

Automotive Catalog Precision Micropower Shunt Voltage Reference

Conv DC-DC 3V to 40V Inv/Step Up/Step Down Single-Out 1.25V to 40V 1.5A 8-Pin SOIC T/R

Very Low Input, Very Low Dropout 3-A Regulator With Enable

3.0V 50ppm/Degrees C, 50uA in SOT23-3 Series (Bandgap) Voltage Reference

–20V, –200mA, Low-Noise, Negative Voltage, Low-Dropout Linear Regulator

LMZ13610TZE/NOPB is a current-mode pulse width modulation switching regulator with 6 V to 36 V input voltage range and up to 10 A output current. It integrates the power inductor in a compact 11-pin package for simplified board design. Available from Texas Instruments with worldwide shipping.

Battery Charger Li-Ion/Li-Pol 2400mA 24-Pin WQFN EP T/R

Low-Drift, Low-Power, Dual-Output Vref and Vref/2 Voltage Reference

17V Input, 500mA Synchronous Step-Down Regulator in SOT-23 with Advanced Eco-Mode™

Use the download button to access the TPS7A9101DSKT schematic symbol, PCB footprint, and 3D model.

3.5MHz, 1500mA peak loading current, high efficiency step-up converter in chip scale packaging

Switching Controllers 6-60V Wide Vin, Current Mode Boost and SEPIC Controller 10-VSSOP -40 to 125