Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 49,901–49,950 of 77,666
PLASTIC, TSSOP-16
Analog Comparators Dual Micropower LinCMOS Voltage
LVDS Interface IC Hi Spd Diff Line Drvr
Analog Comparators Dual Micropower LinCMOS Voltage
The SN74AHCT157NSRG4 is a quad 2-to-1 line data selector/multiplexer in the AHCT logic family, selecting one of 2 input channels across 4 independent sections. It operates from a 4.5 V to 5.5 V supply in a 16-pin SOIC package for high-speed digital routing.
RS-232 Interface IC 3V-5.5V Sgl-Ch RS232 1Mbit Line Drvr/Rcvr
Power Management Specialised - PMIC Pwr Mgmt IC
Translation - Voltage Levels Dual-bit dual-supply bus transceiver with configurable voltage translation 8-SM8 -40 to 125
LP2988AIMM-2.5/NOPB is a Texas Instruments voltage regulator for power rails, industrial controls, telecom modules, and compact embedded supplies. It combines 8-pin configuration, Small Outline Packages assembly style, and datasheet-backed identification. From RFQ-based sourcing, in-stock options can support worldwide shipping.
FIFO 256 x 18 3.3-V Synch FIFO Memory
RS-232 Interface IC 3V-5.5V Multichannel RS-232 Line Drvr/Rec
RS-232 Interface IC 3V-5.5V Sgl-Ch RS232 1Mbit Line Drvr/Rcvr
The ADC10464CIWMX/NOPB is a 10-bit 4-channel flash ADC from Texas Instruments with a maximum conversion time of 0.9 microseconds. It accepts analog inputs from -0.05V to 5.55V and is housed in a 28-pin SOIC package. Lead-free, RoHS-compliant, and available worldwide for data acquisition applications.
Switching Voltage Regulators SIMPLE SWITCHER® 4.2-V to 65-V, 1-A synchronous step-down converter with 26-uA IQ 8-SO PowerPAD -40 to 125
Buffers & Line Drivers Quad Bus Buff Gate With 3-State Outputs
PLASTIC, HTQFP-48
Logic Gates Quadruple 2-Input Exclusive-OR Gate
74AC11245NSRG4 is an octal bidirectional bus transceiver with direction control from Texas Instruments in a 24-pin SOIC package. Key specs: 8 bidirectional channels, 24 mA output sink current, AC-logic family. Available in stock with worldwide shipping.
Bus Receivers
Bus Receivers
Bus Transceivers Octal Bus Transcvr
Analogue Switch ICs SINGLE ANALOG SWITCH
LDO Voltage Regulators 200mA High PSRR LDO
Buffers & Line Drivers
Battery Management Power Management Unit For Low Power Handheld Applications 14-WSON -40 to 85
LVT-family bidirectional bus transceiver with common control, rated for 50 pF load capacitance and 24 mA output sink current in a 48-pin SOIC package. Supports bidirectional data transfer with low-voltage TTL-compatible logic levels. Available from Texas Instruments with worldwide shipping.
Battery Management Power Management IC (PMIC) For Low Power Handheld Applications 14-WSON -40 to 85
LDO Voltage Regulators 200mA High PSRR LDO
LP2988AIMM-2.5 is a Texas Instruments 8-pin integrated circuit for PCB interconnects. It supports documented connector pitch with documented PCB construction for production assemblies. From RFQ-based stock, buyers can request lifecycle support and worldwide shipping.
Precision Amplifiers Dual Lo-Pwr R-to-R Input/Output Op Amp
Bus Transceivers Octal Bus Transcvr
Precision Amplifiers Dual Lo-Pwr R-to-R Input/Output Op Amp
Operational Amplifiers - Op Amps Quad 2.7-V High-Slew Rate R-To-R Output
Use the download button to access the REF3030AIDBZR/BKN schematic symbol, PCB footprint, and 3D model.
The CD4076BPWRG4 is a 4-bit D flip-flop IC in TSSOP-16 package with 3-state output and up to 3 MHz operating frequency. Features 50 pF load capacitance and TRUE output polarity for reliable digital logic applications. Available from Texas Instruments with worldwide shipping.
UART Interface IC
Clock Synthesizer/Jitter Cleaner Programmable 1-PLL VCXO Clock Synth
The SN74CBT3245CPW is an 8-bit CBT-family FET bus switch from Texas Instruments featuring bidirectional switching with near-zero propagation delay and active-low output enable control. It supports 50pF load capacitance, operates from 3.3V supply, and is packaged in a 20-pin TSSOP for compact bus isolation designs. Ideal for data bus switching, processor-to-peripheral routing, and signal multiplexing in computing and embedded systems.
Differential Amplifiers Fully Diff I/O High Slew Rate
Metering Systems on a Chip - SoC Ultra low power Micro Controller
FIFO 16384 x 36 Synch FIFO Memory
DC-DC Converters SO-8 RoHS
Power Switch ICs - POE/LAN Poe Pd Controller W/ Aux Support R 595-TPS2376DDA-H
Digital to Analog Converters - DAC
Texas Instruments LM4040DIM3X-6.0/NOPB is a precision two-terminal 6.0 V shunt voltage reference with tight 0.1% initial accuracy, packaged in a 3-pin SOT-23 for space-constrained ADC and DAC biasing applications.
RF Transmitter High Perf RF Xmtr
The THS1209CDAG4 is a dual-channel 12-bit analog-to-digital converter from Texas Instruments featuring a proprietary conversion method with an analog input range of 1.4V to 4.05V. It provides binary and 2's complement output coding with a maximum linearity error of 0.0366% in a 32-pin TSSOP package. Available from stock with worldwide shipping.
Voltage References Adjustable Precision Shunt Regulator
Analog to Digital Converters - ADC 2-ch 500MSPS BTS Feedback & Recvr IC
LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote