Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 49,101–49,150 of 77,666
The DS26C31MJ-MLS is a quad RS-422 differential line driver IC from Texas Instruments, providing four independent balanced differential output channels compliant with EIA RS-422 and CCITT V.11 standards in a ceramic 16-pin DIP package. It supports data rates up to 20Mbps and operates over the military temperature range. Ideal for robust long-distance serial data transmission in harsh environments.
Touch Screen Controllers Prog 4-Wire w/20-Bit Stereo Audio Codec
The LMC6681BIN is a single rail-to-rail input and output CMOS operational amplifier from Texas Instruments, featuring ultra-low bias current of 80fA maximum for high-impedance sensor interfaces. It delivers 82dB typical common-mode rejection ratio, voltage-feedback architecture, and operates from a single 2.7V to 16V supply in an 8-pin DIP package. Ideal for precision photodetector amplifiers, pH meters, and electrometer-grade measurement instruments.
LMC6681AIN is an operational amplifier by Texas Instruments. Key specs include Average Bias Current-Max (IIB): 0.00002 µA; Bias Current-Max (IIB) @25C: 8e-8 µA. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.
The LMC6681BIN/NOPB is a single-supply, rail-to-rail input and output CMOS operational amplifier from Texas Instruments, optimized for low-voltage applications. It features ultra-low input bias current in the femtoampere range, wide supply voltage range, and is housed in a DIP package, making it ideal for precision analog signal conditioning and sensor interface circuits.
Operational Amplifiers - Op Amps
500-mA, 4-MHz, 2.85-Vout High-Efficiency Step-Down Converter in Chip Scale Packaging
The CD54HC4316F3A is a quad SPST analog switch from Texas Instruments in a 16-pin CDIP ceramic package, featuring 4 independent single-pole single-throw channels with 200 MHz bandwidth. It operates from a 2V to 10V supply range and supports up to 6V input voltage for versatile analog and digital signal routing. Available from stock worldwide with fast shipping.
SN74ABT16600DLRG4 is an 18-bit universal bus transceiver with 3-state outputs from Texas Instruments, featuring bidirectional control, independent output enable per direction, and 50 pF load capacitance in a 56-pin SOIC package. Available in stock with worldwide shipping.
USB Interface IC Dual USB billboard for USB-PD devices with integrated 5-V load switch 96-NFBGA -10 to 85
Switching Voltage Regulators 6A Sync Buck Converter
Universal Bus Functions 18-Bit Univ Bus Trncvr W/3-St Otpt
The CD74HC4053MG4 is a high-speed CMOS triple 2-channel analog multiplexer and demultiplexer from Texas Instruments, featuring three independent single-pole double-throw switches with 180 MHz bandwidth and up to 6V input voltage. It enables analog signal routing in low-power CMOS designs. Available in 16-pin SOIC package with worldwide availability.
Use the download button to access the LM2596S-ADJ/NOPB schematic symbol, PCB footprint, and 3D model.
Switching Voltage Regulators
The LMH6733MQX/NOPB is a triple 480 MHz current-feedback operational amplifier from Texas Instruments in a 16-pin SSOP package, offering 53 dB minimum common-mode rejection ratio and 19 µA maximum bias current. Ideal for video signal processing and high-frequency amplifier applications requiring three matched channels. Available lead-free with worldwide distribution.
Precision Amplifiers Dual Precision Single Supply uPower
Analog to Digital Converters - ADC 10-Bit 600 ns A/D Converter with Input Multiplexer and Sample/Hold 28-SOIC -40 to 85
MCU 16-bit MSP430 RISC 96KB Flash 2.5V/3.3V 80-Pin LQFP T/R
PCM Audio Codec 2ADC / 2DAC Ch 42-Pin DSBGA T/R
GREEN, PLASTIC, MS-012AC, SOIC-16
PINA239AQDGSRQ1 is an AEC-Q100-qualified 16-bit high-precision current, voltage, and power monitor from Texas Instruments with SPI output and 85 V bus rating. It integrates a single-channel measurement path in a 10-pin TSSOP package for automotive-grade power monitoring. Available worldwide with competitive pricing for automotive supply chain sourcing.
Switching Voltage Regulators 6A Sync Buck Converter
The LM5117QPMHENOPB is an automotive-qualified wide input range synchronous buck controller from Texas Instruments, housed in a 20-pin HTSSOP package and rated for AEC-Q100 Grade 1 operation. It supports duty cycles from near 0% to 100% with peak-current mode control for stable regulation across demanding automotive and industrial voltage conversion applications. Available in stock worldwide for high-voltage automotive DC-DC power supply designs.
Digital to Analog Converters - DAC 8-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output 6-SOT -40 to 105
LDO Voltage Regulators
Switching Controllers Low-Power BiCMOS Current-Mode PWM
Switching Voltage Regulators 3A STEP-DOWN VLTG REG
Use the download button to access the INA186A1QDBVRQ1 schematic symbol, PCB footprint, and 3D model.
The SN74BCT2240NSRG4 is an octal buffer and line driver IC from Texas Instruments, featuring two independent 4-bit groups with active-low enable control and unidirectional signal flow. Built on the BCT/FBT logic family, it provides 12 mA output drive current per channel, supports 50 pF capacitive loads, and is housed in a 20-pin SOIC package. It is suitable for bus-driving, memory interface, and signal buffering applications.
The CLVTH16835IDGGREP is a military-enhanced 18-bit universal bus driver from Texas Instruments' LVT 3.3V logic family in a 56-pin SSOP package. It features 64 mA output drive, unidirectional data flow with active-low enable control, and enhanced reliability screening for defense and high-reliability computing applications requiring wide bus drive.
Video Amplifiers 3-Channel Low Power SDTV
Use the download button to access the TLV9104IDR schematic symbol, PCB footprint, and 3D model.
Operational Amplifiers - Op Amps Adv LinCMOS Rail to Rail MicroPwr Dual
Operational Amplifiers - Op Amps Dual Lo Vltg Lo Pwr RRO
The SN74LVC1G58YEAR is a single 3-input majority logic gate from Texas Instruments in the LVC logic family, outputting HIGH when two or more of the three inputs are HIGH, with 3-state output capability. It is housed in a ultra-compact 6-ball BGA package (2x3, 0.20mm pitch) supporting 1.65V to 5.5V operation for advanced low-voltage digital systems. Available in stock worldwide for space-critical consumer and IoT designs.
The SN74HC42NSRE4 is a high-speed CMOS 4-line to 10-line BCD decimal decoder from Texas Instruments' HC/UH family, decoding 4-bit binary-coded-decimal inputs into 10 active-low outputs in a 16-pin SOIC package. It is RoHS and REACH compliant and suits address decoding, display driving, and digital signal routing in industrial and consumer logic systems.
The V62/04718-01XE is a military-enhanced 18-bit universal bus driver from Texas Instruments' LVT (Low-Voltage Technology) family operating at 3.3V. It features unidirectional data flow with active-low enable control, 64 mA output drive current, and is housed in a 56-pin SSOP package. Qualified for high-reliability defense and space electronics applications.
40-V Current Sense Amplifier for Cost-Sensitive Systems
Analog to Digital Converters - ADC 16-Bit 15SPS D-S
Current Sense Amplifiers AEC-Q100, 40V, bi-directional, high-precision current sense amplifier w/ picoamp IB & ENABLE 5-SOT-23 -40 to 125
Use the download button to access the INA186A5QDBVRQ1 schematic symbol, PCB footprint, and 3D model.
Switching Controllers BiCMOS Low-Power Current Mode
Switching Controllers Automotive BiCMOS low-power current-mode PWM controller 8-SOIC -40 to 125
AM26S10CDG4 is a 16 pins integrated circuit by Texas Instruments. Key specs: 16 pins, Small Outline Packages package, Bus Transceivers Quad Bus. From quote-based sourcing, in stock checks support worldwide shipping.
The SN74ABT162601DLG4 is an 18-bit universal registered bus transceiver with 3-state outputs from Texas Instruments in the ABT logic family. It features independent output enable for each direction, clock enable, and synchronous operation, packaged in a 56-pin SSOP for high-density backplane and bus interface designs.
Universal Bus Functions 12-24 Reg Bus
Buffers & Line Drivers
Board Mount Temperature Sensors +/-1degC Remote and Local Temp SENSOR
Operational Amplifiers - Op Amps Dual uPwr Lo-Voltage Op Amp
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote