Integrated Circuit

CY7C199CN-15PXC is a Cypress Semiconductor Integrated Circuit for industrial controls and power management. Key specs include 28 pins, 256Kb, and 5V. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.

Silicon Labs Si8232BB-B-IS1 Dual Isolated Gate Driver MOSFET Power Driver, 0.5A 16-Pin, SOIC

SILICON LABS - SI8920BC-IP - ISOLATION AMPLIFIER, -40 TO 125DEG C

Silicon Labs 4通道 数字隔离器, 10 kVrms隔离电压, 16针 SOIC W

SI8621BT-IS Silicon Labs, 2-Channel Digital Isolator 150Mbit/s, 10 kVrms, 16-Pin SOIC W

Silicon Labs SI82390CD-IS Dual Isolated Gate Driver MOSFET Power Driver 16-Pin, SOIC W

SILICON LABS - SI8642BT-IS - Digital Isolator, 4 Channel, 8 ns, 2.375 V, 5.5 V, WSOIC, 16 Pins

Silicon Labs Si8920BD-IS, Current Shunt Monitor Single Differential 16-Pin SOIC

Si8231BB-B-IS1 is a Silicon Labs integrated circuit for embedded control. Key specs include 16 pins, Small Outline Packages, 0.5A. From RFQ-based sourcing, in-stock options can support worldwide shipping.

Si8233BB-C-IS1 is a Silicon Labs integrated circuit for embedded control. Key specs include 16 pins, Small Outline Packages, 4A. From RFQ-based sourcing, in-stock options can support worldwide shipping.

Si8230BB-B-IS1 is a Silicon Labs transistor for embedded electronic designs. Key specs include 16 positions, 16 pins, 0.5 inch pitch. Request quote for availability, lifecycle status, and worldwide shipping.

SILICON LABS - SI7051-A20-IM - TEMPERATURE SENSOR, 0.1DEG C, DFN-6

A = 1.0% tolerance Vref; B = 0.5% tolerance Vref; C = 0.2% tolerance Vref; Programmable Output Voltage Range of 1.24 V to 16 V; Voltage Reference Tolerance +/-1.0%; Sharp Low Current Turn-On Characteristic; Low Dynamic Output Impedance of 0.20 W from 100 mA to 20 mA; Micro Miniature TSOP-5 and TO-92 Packages; Pb-Free Package is Available

Secondary-Side Synchronous Rectifier Driver

TOREX - XC8109AC10ER-G - Power Load Distribution Switch, High Side, Active High, 1 Output, 5.5V, 1.3A, 0.1ohm, USP-C, 6-Pin

MPC94551EF from IDT is a integrated circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 94551Input, 8 pins, -40°C to 85°C, SOIC package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SOIC format supports standard assembly and sourcing workflows.

Use the download button to access the 1EDI60I12AF schematic symbol, PCB footprint, and 3D model.

SOIC-16

74HC(T)2G66-Q100 - Dual single-pole single-throw analog switch@en-us

74HC(T)2G66-Q100 - Dual single-pole single-throw analog switch@en-us

74HC(T)2G66-Q100 - Dual single-pole single-throw analog switch@en-us

2.50 X 3.50 MM, 0.85 HEIGHT, MO-241, SOT-763-1, DHVQFN-16

NJU8754V-TE1 is a Audio Amplifiers Class D Power for electronic system designs. Key details include 10 pins in Small Outline Packages from NJR. It supports signal conditioning, sensor front ends, data acquisition modules, and precision instrumentation with worldwide sourcing support.

Use the download button to access the BD80C0AFPS-E2 schematic symbol, PCB footprint, and 3D model.

NCP1602AEASNT1G is a Obsolete - Power Factor Controller, Enhanced Light Load Efficiency for electronic system designs. Key details include 6 pins in Small Outline Packages from ON Semiconductor. It supports industrial electronics, embedded systems, instrumentation, maintenance repair, and production sourcing programs with worldwide sourcing support.

ROHM BD90C0AFP-CE2, LDO Voltage Regulator Controller, 1A, 9 V, ±1% 3 + Tab-Pin, DPAK

Operating Input Voltage Range: 2.5 V to 24 V; 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.0 V, 3.3 v, 5 V Fixed output Voltagege Options; Low 4.7 uA typ Quiescent Current; PSRR 54 dB at 1 kHz; Thermal Shutdown and Current Limit Protections; Available in XDFN6 1.5 x 1.5 mm, TSOP-5 and SC-70 packages

Operating Input Voltage Range: 2.5 V to 24 V; 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.0 V, 3.3 v, 5 V Fixed output Voltagege Options; Low 4.7 uA typ Quiescent Current; PSRR 54 dB at 1 kHz; Thermal Shutdown and Current Limit Protections; Available in XDFN6 1.5 x 1.5 mm, TSOP-5 and SC-70 packages

SSOP-24

FTDI Chip VNC2-48L1B is a integrated circuit for industrial, embedded, repair, and production electronic designs. Key specs include 48 pins, -40 to 125 °C, 0 A, 3.3 V, with QFP packaging. Use it for industrial control, embedded systems, repair sourcing, prototyping, and production builds with RFQ pricing, inquiry stock support, and worldwide shipping.

Digital to Analog Converters - DAC 14 BIT LOW NOISE VERSION

Maxim,MAX4475ASA+ Maxim MAX4475ASA+ High Speed Op Amp, 10MHz Rail-Rail, 2.7 ??? 5.5 V, 8-Pin SOIC

Maxim,MAX4475AUA+ Maxim MAX4475AUA+ Op Amp, 10MHz Rail-Rail, 2.7 ??? 5.5 V, 8-Pin uMAX

MAXIM INTEGRATED PRODUCTS - MAX4450EXK+T - OP AMP, 210MHZ, 485V/US, SC70-5

MAXIM INTEGRATED PRODUCTS - MAX4488AUT+T - OP AMP, 42MHZ, 10V/US, SOT23-6

Operational Amplifiers - Op Amps Low-Noise Low-Dist Wide-Band, R-to-R

MAX4454EUD+ is a High Speed Operational Amplifiers Low-Cost, +3V/+5V, 620 uA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs for electronic system designs. Key details include 14 pins in Small Outline Packages from Maxim Integrated. It supports signal conditioning, sensor front ends, data acquisition modules, and precision instrumentation with worldwide sourcing support.

UDFN-8

UDFN-8

No Phase Reversal on the Output for Over-driven Input Signals; High Output Current (ISC = 80 mA, Typ); Typical Gain Bandwidth Product = 2.2 MHz; 600 Ω Output Drive Capability; Low Supply Current (ID = 0.9 mA, Typ); Extended Operating Temperature Ranges (-40° to +105°C and -55° to +125°C); Output Voltage Swings within 50 mV of both Rails; Input Voltage Range Includes both Supply Rails; Low Voltage, Single Supply Operation (+1.8 V and Ground to +12 V and Ground)

No Phase Reversal on the Output for Over-driven Input Signals; High Output Current (ISC = 80 mA, Typ); Typical Gain Bandwidth Product = 2.2 MHz; 600 Ω Output Drive Capability; Low Supply Current (ID = 0.9 mA, Typ); Extended Operating Temperature Ranges (-40° to +105°C and -55° to +125°C); Output Voltage Swings within 50 mV of both Rails; Input Voltage Range Includes both Supply Rails; Low Voltage, Single Supply Operation (+1.8 V and Ground to +12 V and Ground)

ON Semiconductor MC33204DG is a integrated circuit for industrial, embedded, repair, and production electronic designs. Key specs include 14 pins, -40 to 105 °C, 751 A, 0 A, with SOIC-14 NB packaging. Use it for industrial control, embedded systems, repair sourcing, prototyping, and production builds with RFQ pricing, inquiry stock support, and worldwide shipping.

LT1017CS8#PBF is a LINEAR TECHNOLOGY - LT1017CS8#PBF - IC, COMPARATOR, DUAL, 8SOIC for electronic system designs. Key details include 8 pins in Small Outline Packages from Linear Technology. It supports industrial electronics, embedded systems, instrumentation, maintenance repair, and production sourcing programs with worldwide sourcing support.

LT1017IS8#PBF is a Linear Technology LT1017IS8#PBF Dual Comparator, Push-Pull O/P, 40 V 8-Pin SOIC for electronic system designs. Key details include 8 pins in Small Outline Packages from Linear Technology. It supports industrial electronics, embedded systems, instrumentation, maintenance repair, and production sourcing programs with worldwide sourcing support.

7 X 7 MM, 0.80 MM PITCH, LEAD FREE, LQFP-32

VNC2-32Q1B is a QFN-32 for electronic system designs. Key details include 32 pins in Other from FTDI Chip. It supports industrial electronics, embedded systems, instrumentation, maintenance repair, and production sourcing programs with worldwide sourcing support.

Dual High Speed USB UART/FIFO IC, LQFP64 FTDI Chip FT2232HL Dual UART Interface RS232, RS422, RS485 480Mbit/s, 64-Pin, LQFP

RX631 Group microcontrollers come in a comprehensive memory vs. package lineup to suit your system scale. In addition to standard functions such as 12-bit A/D converter, motor control timers, SCI, RSPI, I2C, CAN, and safety features, connectivity functions such as Ethernet and USB host have been enhanced. The lineup also includes products possessing specialized functions, such as sensing/image display using a CMOS camera, or security (hardware AES encryption). Products that support high-temperature (105°C)

HCPL-3700-000E is a 0.300 INCH, ROHS COMPLIANT, DIP-8 for electronic system designs. Key details include 8 pins in Dual-In-Line Packages from Avago Technologies. It supports industrial electronics, embedded systems, instrumentation, maintenance repair, and production sourcing programs with worldwide sourcing support.

LTC2364IDE-16#PBF is a LINEAR TECHNOLOGY - LTC2364IDE-16#PBF - ADC, 16BIT, 250KSPS, +/-0.75LSB, 16DFN for electronic system designs. Key details include 16 pins in Small Outline No-lead from Linear Technology. It supports data acquisition, industrial control, instrumentation, and mixed-signal conversion boards with worldwide sourcing support.