Integrated Circuit

74HC(T)04 - Hex inverter@en-us

Low Input Current: 1mA; High Noise Immunity Characteristic of CMOS Devices; In Compliance With the JEDEC Standard No. 7A Requirements; Chip Complexity: 36 FETs or 9 Equivalent Gates; Output Drive Capability: 10 LSTTL Loads; Outputs Directly Interface to CMOS, NMOS and TTL; Operating Voltage Range: 2 to 6V; Pb-Free Packages are Available

74HC(T)04 - Hex inverter@en-us

MAX32600-P85B+ is a Maxim Integrated Microcontroller for embedded control, sensing, communications, and motor-control designs. It combines -40°C to 85°C, 192 pins, and BGA package, 192-pin layout, -40°C to 85°C operation for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

Transimpedance Amplifiers 622Mbps, Low-Noise, High-Gain Transimpedance Preamplifier

The RL78/G13 microcontrollers balance the industry's lowest level of consumption current (CPU: 66 μA/MHz, standby (STOP): 230 nA) and a high performance of 43.2 DMIPS (32 MHz). They have an on-chip oscillator, data flash, A/D converter, and more. Built-in safety features (function that detects illegal operation of hardware) enable support for the household appliance safety standard (IEC/UL 60730). These microcontrollers can be used in a wide variety of applications from home and consumer appliances to indus

Q427242310007 RTC-72423 is a Epson Timing Integrated Circuit for electronic assemblies, maintenance sourcing, and production builds. It combines 24 pins, 24 pins, and Small Outline Packages package, 24-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

The RL78/G13 microcontrollers balance the industry's lowest level of consumption current (CPU: 66 μA/MHz, standby (STOP): 230 nA) and a high performance of 43.2 DMIPS (32 MHz). They have an on-chip oscillator, data flash, A/D converter, and more. Built-in safety features (function that detects illegal operation of hardware) enable support for the household appliance safety standard (IEC/UL 60730). These microcontrollers can be used in a wide variety of applications from home and consumer appliances to indus

MAXIM INTEGRATED PRODUCTS - MAX3658AETA+T - TRANSIMPEDANCE AMP, 580MHZ, TDFN-8

DFN-10

MSOP-10

Precision Amplifiers Dual Op Amp

Rohm, Bip, Tr., BRT, DTC114TUAT106 ROHM, DTC114TUAT106 NPN Digital Transistor, 100 mA 50 V Ratio Of 10 kΩ, 3-Pin SOT-323

LINEAR TECHNOLOGY - LTC1517CS5-5#TRMPBF - IC, CHARGE PUMP REG, 5V, TSOT23-5

PZM6.2NB2 T/R is a Nexperia Diode for rectification, voltage clamping, and circuit protection. It combines 3 pins, 3-Pin, and SOT23 (3-Pin) package, 3-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

WT12-A-AI3 is a Silicon Labs Power Supply for industrial power conversion and distributed supply rails. It combines 31 pins, 31 pins, and Other package, 31-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

VEML7700-TT is an Vishay Electronic Component for industrial controls, embedded electronics, maintenance builds. Key specs include 6 W, 4 pins and 4-pin package. From $ price in stock worldwide shipping.

8-bit Microcontrollers - MCU S08PA 8bit MCU S08 core 4KB FLS TSSOP16

LDO Regulator Pos 3.3V 0.6A 4Pin(3+Tab) Diodes Inc AP7215-33YG-13, Single Linear Voltage Regulator, 600mA 3.3 V, 3-Pin SOT-89

EFM32ZG222F16-QFP48 is a Silicon Labs Microcontroller for embedded control, sensing, communications, and motor-control designs. It combines 48 pins, 16KB, and Quad Flat Packages package, 48-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

SOT23-6

SILICON LABS - C8051F022-GQ - 8 Bit MCU, ISP Flash, C8051 Family C8051F02x Series Microcontrollers, 25 MHz, 64 KB, 4.25 KB

LINEAR TECHNOLOGY - LTC3114IDHC-1#PBF - DC-DC CONV, SYNC BUCK-BOOST, DFN-16

40V, 1A Synchronous Buck-Boost DC/DC Converter with Programmable Output Current

VEML7700-TR is a Vishay Optocoupler for electronic assemblies, maintenance sourcing, and production builds. It combines 4 pins, 6 W, and Other package, 4-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

Silicon Labs C8051F023-GQ, 8bit 8051 Microcontroller, 25MHz, 64 kB Flash, 64-Pin TQFP

LINEAR TECHNOLOGY - LTC3114IFE-1#PBF - DC-DC CONV, SYNC BUCK-BOOST, TSSOP-16

Silicon Labs C8051F311-GM, 8bit 8051 Microcontroller, 25MHz, 16 kB Flash, 24-Pin QFN 8/16 kB ISP Flash MCU Family

USB/UART IC, w/USB Charge Detection FTDI Chip FT234XD-R, USB Controller, 3MBd, USB 1.1, USB 2.0, 5 V, 12-Pin DFN

Si5374B-A-BL is an Silicon Labs Electronic Component for industrial controls, embedded electronics, maintenance builds. Key specs include 80 pins and BGA. From $ price in stock worldwide shipping.

Clock Synthesizer / Jitter Cleaner PRECISION CLOCK MULT. JITTER ATTEN.

Clock Synthesizer / Jitter Cleaner Quad DSPLL jitter attenuating clock, Low loop bandwidth (4 to 525Hz) 8 input, 8 output (2 kHz to 808 MHz)

LINEAR TECHNOLOGY - LTM4616IY - DC/DC CONV, BUCK, 1.5MHZ, BGA-144

Clock Synthesizer / Jitter Cleaner QUAD DSPLL JITT ATT CLK LO LP BW 8IN/OUT

TSOT-23, 6 PIN

Freescale MC9S08PA4VWJ, 8bit S08 Microcontroller, 20MHz, 4 kB Flash, 20-Pin SOIC

ROHS COMPLIANT, SLP1616P6, 6 PIN

Op Amp,Prec,Low Power Linear Technology LT1097S8#PBF Op Amp, 0.7MHz, 8-Pin SOIC

Apem IKD0300101 is a 3-position through-hole DIP switch with SPST raised slide actuator and gold-plated phosphor bronze contacts. Key specs: 8.56 mm body length, 6.2 mm breadth, UL approved. Available from stock with worldwide shipping.

Chip Complexity: FETs = ≤ 100; Designed for 2.0 V to 5.5 V Vcc Operation; High Speed: tPD = 3.7 ns (Typ) at VCC = 5 V; Low Power Dissipation: ICC = 1.0 µA (Max) at TA = 25°C; TTL-Compatible Inputs: VIL = 0.8 V; VIH = 2.0 V; CMOS-Compatible Outputs: VOH > 0.8 VCC ; VOL < 0.1 VCC @Load; Power Down Protection Provided on Inputs and Outputs; Balanced Propagation Delays; Pin and Function Compatible with Other Standard Logic Families; Pb-Free Packages are Available

BTN7970B is a Infineon Driver IC for motor control, power switching, relay drive. Key specs include 7 PIN, 1 Output, 77 A, 4 pins and D2PAK. From $ price in stock worldwide shipping.

3 independent current sinks up to 175 mA rated 25 V; LED current set by external low power control resistors; Individual PWM control per channel; Low dropout current source (0.4 V at 175 mA) ; Output Enable input for dimming; 'Zero' current shutdown mode; 3 V to 5.5 V logic supply; Thermal shutdown protection

QFP-208

The SH7268, SH7269 Group are high-performance microcontrollers incorporating SH2A-FPU cores. The SH7268, SH7269 Group share the following features: (1) large-capacity 2.5 megabyte (MB) on-chip SRAM that is 1.7 times the capacity of the Renesas Electronics' existing MCU (SH7266) allowing display of WVGA size (800 x 480 pixel) images without any external SRAM. (2) Increased maximum CPU operating frequency by approximately 1.8 times (266 MHz), which provides increased performance for device control and digital

RENESAS - HD64F2633F25V - MCU, 16BIT, H8S, 25MHZ, QFP-128

VS-50WQ10FNPBF is a Vishay Diode for rectification, voltage clamping, and circuit protection. It combines 3 pins, -252A, and Other package, 3-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

XC2C256-7PQG208I is a XILINX Integrated Circuit for electronic assemblies, maintenance sourcing, and production builds. It combines 208 pins, 256 ma, and Quad Flat Packages package, 208-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

Power Switch ICs - Power Distribution Bidirectional power switch

The HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E family of RS-232 transmitters/receivers interface circuits meet all ElA high-speed RS-232E and V. 28 specifications, and are particularly suited for those applications where ±12V is not available. A redesigned transmitter circuit improves data rate and slew rate, which makes this suitable for ISDN and High-Speed modems. The transmitter outputs and receiver inputs are protected to ±15kV ESD (Electrostatic Discharge). They require a single +5V

Use the download button to access the BA33BC0T schematic symbol, PCB footprint, and 3D model.