Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 44,851–44,900 of 77,666
IC REDRIVER USB 3.0 2CH 24VQFN
2/2 Transceiver Full RS232 20-SOIC
ACTIVE. TSSOP. DGG. 48. 2000. RoHS & Green. NIPDAU. Level-2-260C-1 YEAR. -40 to 125. 65LVDS86AQ. SN65LVDS86AQDGGRQ
Texas Instruments SN65LVDS93CTDGGTQ1 is an automotive-grade LVDS serializer converting 28 parallel inputs to 4 serial LVDS outputs at up to 1.904Gbps data rate in a 56-pin TSSOP package. It is designed for high-speed display and camera link applications requiring reliable differential signal transmission. Available from stock with worldwide shipping.
Dual multiplexed LVDM repeater
The SNJ55LVDS32J is a military-grade quad LVDS differential line receiver compliant with TIA/EIA-644, operating over a -55°C to +125°C temperature range. It features four independent differential input channels with a common-mode input range of 0 V to 2.4 V in a 16-pin ceramic DIP package. Available from authorized distributors with worldwide shipping.
SN65HVD1040QDRSV is an AEC-Q100 qualified industrial CAN bus transceiver from Texas Instruments with ultra-low power standby mode and bus wake-up capability, supporting data rates up to 1 Mbps. It operates from a 3.3 V to 5 V supply and features ±70 V bus fault protection. Designed for automotive and industrial networks requiring reliable CAN communication with sleep/wake power management.
14-BIT ASYNCHRONOUS BINARY COUNTERS
Use the download button to access the SN65DSI85ZXHR schematic symbol, PCB footprint, and 3D model.
SN65LBC031QDRG4 is a single-channel RS-485/RS-422 transceiver supporting data rates up to 1000 Mbps, featuring half-duplex operation, ±15 kV ESD protection, and automotive-grade qualification in SOIC-8 package. Suited for high-speed industrial and automotive serial communication buses.
1/8 Unit-Load Option Available (Up to 256 receiver enables. A low, less than 1 μA, standby Nodes on the Bus)
Differential Bus Transceiver
Extended Common-mode RS-485 Transceiver
54LS11 TRIPLE 3-INPUT POSITIVE-A
Military single 8-input, 4.5-V to 5.5-V bipolar NAND gate
Notebook Computer Interface 64-NFBGA (5x5)
SN64BCT244NSR is a non-inverting 8-bit bus driver from Texas Instruments featuring two 4-bit sections with 3-state outputs and active-low output-enable control. The BCT-family device supports unidirectional bus driving with power-off disable to allow live insertion without bus contention. Housed in a 20-pin SOIC package, it targets backplane, memory, and CPU-to-bus buffering in embedded and industrial systems.
Texas Instruments SNJ55LBC175J is a quadruple low-power differential line receiver with Schmitt trigger inputs, supporting EIA-422, EIA-423, EIA-485, and V.11 standards, in a 16-pin ceramic DIP package for military and industrial use.
Use the download button to access the SN55LBC174J schematic symbol, PCB footprint, and 3D model.
54HC166 PARALLEL-LOAD 8-BIT SHIF
54LS51 AND-OR-INVERT GATES
DUAL 4-INPUT POSITIVE-NOR GATES
54HC365 HEX BUS DRIVERS WITH 3-S
Buffer/Line Driver 6-CH Inverting 3-ST CMOS 16-Pin CDIP Tube
Use the download button to access the SNJ54S112J schematic symbol, PCB footprint, and 3D model.
SNJ55LBC172J is a quadruple low-power RS-485 differential line driver IC in a 16-pin ceramic DIP package, rated for -55°C to 125°C military temperature range. It integrates 4 independent drivers with differential outputs compliant with EIA-485 for multi-drop bus transmission. Designed for military, aerospace, and rugged industrial serial communication systems requiring extended temperature operation.
Buffers & Line Drivers Dual Differential Line Driver 14-CDIP -55 to 125
High dc Noise Margin
SNJ54HC165J is an 8-bit parallel-load shift register from Texas Instruments in a 16-CDIP ceramic package, operating across -55°C to 125°C with a maximum clock frequency of 21 MHz and 50 pF load capacitance.
54HC191 SYNCHRONOUS 4-BIT UP/DOW
Use the download button to access the SNJ55114J schematic symbol, PCB footprint, and 3D model.
SNJ54AHC74J is a dual positive-edge-triggered D-type flip-flop from Texas Instruments in a 14-pin ceramic DIP package. Features complementary Q and Q-bar outputs, asynchronous clear and preset, and 50 pF load capacitance rating. From $8 in stock worldwide shipping.
54HC27 TRIPLE 3-INPUT POSITIVE-N
Flip-Flops Dual D-type Positive-Edge-Triggered Flip-Flops With Preset 14-CDIP -55 to 125
Use the download button to access the SNJ54S86J schematic symbol, PCB footprint, and 3D model.
Logic Gates 4-2-3-2 Input AND-OR-invert Gates 14-CDIP -55 to 125
cd
54S37 QUADRUPLE 2-INPUT POSITIVE
Use the download button to access the SNJ54S32J schematic symbol, PCB footprint, and 3D model.
Military single 8-input, 4.5-V to 5.5-V bipolar NAND gate
4-Bit Bidirectional Universal Shift Registers
SYNCHRONOUS 4-BIT UP/DOWN BINARY COUNTERS
54S260 DUAL 5-INPUT POSITIVE-NOR
Military 2-ch, 4-input, 4.5-V to 5.5-V bipolar NAND gates
Arithmetic Logic Unit - ALU Look-Ahead Carry Generators 16-CDIP -55 to 125
diodee-clamped inputs
Flip-Flops Quadruple D-type Flip-Flops With Clear 16-CDIP -55 to 125
Encoders, Decoders, Multiplexers & Demultiplexers Data Selectors/Multiplexers 16-CDIP -55 to 125
Flip-Flops Hex D-type Flip-Flops With Clear 16-CDIP -55 to 125
Decoder/Demultiplexer Dual 2-to-4 16-Pin CDIP Tube
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote