Integrated Circuit

5962-8990502VEA is a space-grade 1 MHz double-ended PWM controller with 30 V rating, 2 A output, and 9.2 V / 8.4 V UVLO thresholds, supporting both voltage and current-mode control in a 16-pin ceramic DIP package. Input voltage range is 12 V to 20 V with 100% duty cycle capability for demanding power conversion designs. Available from authorized distributors with worldwide shipping.

UC1708-SP NON-INVERTING HIGH SPE

1.2-V ultra-low voltage, 350-kHz-power saving quad op amp for battery powered systems

USB Type-C™ 8.1-Gbps multi-protocol linear redriver

5962-9168902VYA is a MIL-spec 1-phase brushless DC motor controller IC from Texas Instruments in a hermetic 28-pin ceramic DIP package, designed for long-life aerospace and defense motor-drive applications.

Three-channel high-side LED driver with thermal sharing and off-board binning

The UC1705J883B is a single-channel MOSFET gate driver rated at 1.5 A peak output current with a 40 V VDD supply and output latch function. It operates over a -55°C to 125°C temperature range in an 8-pin ceramic DIP package. Available for mil-spec power conversion and motor drive designs.

Texas Instruments TXB0106PWR-P is a 6-bit bidirectional voltage-level translator with automatic direction sensing, supporting 1.2 V to 3.6 V on VCCA and 1.65 V to 5.5 V on VCCB, in a 20-pin TSSOP package. Provides push-pull outputs with up to 100 Mbps data rate. Available worldwide with in-stock inventory.

IC SCREEN CNTRL 12BIT 32FN

RS-232 Interface IC 3- to 5.5-V single channel 250kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection 16-VQFN -40 to 85

TPS92682QRHBRQ1 is a dual-channel automotive-grade constant-voltage and constant-current controller with SPI interface supporting 4.5 V to 65 V input range in a 32-pin QFN package.

Switch ICs - Various 3.3V Quad 2:1 MUX/ Demux LAN Switch{0000}

LNB voltage regulator with I2C interface

PZT (S-PQFP-G100)

The TPS92692PWP is a high-accuracy LED controller with integrated spread-spectrum frequency modulation and an internal PWM generator, enabling precise current regulation for automotive and industrial LED lighting. It supports both peak-current and average-current control modes across a wide input voltage range and is packaged in a 20-pin HTSSOP. Available from major distributors with worldwide shipping.

IC TRANSCEIVER FULL 2/2 20SSOP

The TS3A27518E-Q1 is a 6-bit 1-of-2 multiplexerdemultiplexer designed to operate from 1.65 V to 3.6 V. This device can handle both digital and analog signals, and signals up to V+ can be transmitted in either direction. The TS3A27518E-Q1 has two control pins, each controlling three 1-of-2 muxes at the same time, and an enable pin that is used to put all outputs in high-impedance mode. The control pins are compatible with 1.8-V logic thresholds and are backward compatible with 2.5-V and 3.3-V logic

IC REG LINEAR 5V/2.5V 20HTSSOP

Power Switch ICs - POE/LAN Quad SPDT Wide BW LAN Switch

IC PWM CTRLR LED DVR 8 SOIC

IC TRANSCEIVER FULL 2/2 16TSSOP

Use the download button to access the TRSF3232EIRGTR schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators Mil Enh Fast-Trans Resp 500mA LDO

TRS211CDB

DLP® system management and illumination controller with functional safety capabilities

DLP® system management & illumination controller for automotive exterior lighting

The TRS202ID is a full-duplex RS-232 line transceiver with 2 drivers and 2 receivers compliant to EIA/TIA-232-F, featuring Schmitt-trigger inputs and integrated charge-pump capacitors in a 16-pin SOIC package. It converts 3.3V or 5V logic to RS-232 voltage levels for reliable serial communication in embedded systems.

Fully Integrated 8-Channel DC/DC Converter for Digital Still Cameras

E Ink®, Vizplex™ Display, OMAP™ PMIC 48-VQFN (7x7)

RF MODULATOR 400MHZ-4GHZ 24VFQFN

IC VREF SHUNT ADJ 1.5% SOT23-3

High Efficiency Step-Down Converter MicroSiP™ Power Module with Integrated Inductor

Ultralow 1.2-µA Quiescent Current at 10 mA

The TLE2021MJGB is a precision voltage-feedback operational amplifier from Texas Instruments in a ceramic DIP package. It delivers 110dB typical CMRR, 0.07µA max bias current, and internal frequency compensation for stable high-accuracy signal conditioning. Available in stock with worldwide shipping.

Analog Front End - AFE Analog Front End for commercial smoke detector 38-HTSSOP -40 to 85

High speed high drive single operational amplifier

Use the download button to access the TPS92381PWPR schematic symbol, PCB footprint, and 3D model.

45-V LED backlight driver with three channels 120-mA output

Buck Switching Regulator IC Positive Fixed 1.8V 1 Output 6A 28-PowerTSSOP (0.173", 4.40mm Width)

The TPS73201QDBVRVS is an automotive-grade 250 mA low-dropout voltage regulator with high accuracy and reverse current protection in a 5-pin SOT-23 package. It is AEC-Q100 qualified for use in automotive electronics operating across wide temperature ranges. Available globally for compact in-vehicle power rail regulation.

The TPS65020ARHAR is a 6-channel PMIC integrating three step-down DC/DC converters and three LDOs with I2C control and dynamic voltage scaling in a compact QFN package. It delivers up to 1.5 A per DC/DC channel from a single-cell Li-Ion input of 2.7 V to 5.5 V. Available from authorized distributors with worldwide shipping.

Dual 8-bit programmable current LED drivers

Automotive 300-mA, off-battery (40-V), ultra-low-IQ, low-dropout voltage regulator with enable

Power Management Specialised - PMIC Integrated Power Management IC (PMIC) with 4 DC/DCs, 9 LDOs and RTC 98-NFBGA -40 to 85

Fault protected local interconnect network (LIN) transceiver with dominant state timeout

IC REG LINEAR 3.3V 2A 20HTSSOP

Device Operates from 3 V to 5.5 V Input Supply

750-mA, 10-V, low-dropout voltage regulator with enable & RESET with delay

IC REG LIN 1.8V 250MA SOT223-6

200-mA, high-PSRR, dual-channel low-dropout voltage regulator with enable