Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
42,055 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
LM2904BQDGKRQ1 Selection Guide: Automotive Dual Op-Amp Variants, Packages, and Alternatives
How to choose the right LM2904BQ automotive dual op-amp variant: AEC-Q100 grade, offset voltage, package, and non-automotive alternatives explained.
May 27, 2026
ST3232CDR vs ST3232 Variants: RS-232 Transceiver Selection Guide
How to choose the right ST3232 RS-232 transceiver variant: compare ST3232CDR, ST3232BDR, ST3232BTR, ST3232CTR, and ST3232EBDR by supply voltage, package, temperature, and ESD rating.
May 27, 2026
ST3232CDR RS-232 Transceiver: Application Note & Design Guide
Complete design guide for the ST3232CDR RS-232 transceiver: charge-pump capacitor selection, PCB layout, ESD protection, and circuit examples for 3.3 V systems.
May 26, 2026
TPS613222ADBVR Selection Guide: How to Choose the Right Low-Power Boost Converter
How to choose between TPS613221ADBVR, TPS613222ADBVR, and TPS613223ADBVR: key parameters include quiescent current, output voltage, and switch current rating.
May 26, 2026
All Integrated Circuit Components
Showing 41,901–41,950 of 42,055
AEC-Q100, 26-V, low-/high-side, voltage output current sense amplifier
4.5V to 17V input, 6A synchronous step-down SWIFT converter with current-mode PWM control and light load efficiency optimization. Features integrated high-side and low-side MOSFETs in a compact 14-pin QFN package. From $0.257, in stock worldwide shipping.
TVS0701DRBR is a 10V transient voltage suppressor diode from Texas Instruments with 11V clamping voltage and silicon diode element in an 8-pin SOIC package. From $0.284 in stock worldwide shipping.
35-μV Offset, 8-nV/√Hz noise, low-power, precision instrumentation amplifier
LDO Voltage Regulators TLV759P 1-A High Accuracy Adjustable LDO in a Small Size Package
TCAN4550RGYR is a CAN FD controller with integrated transceiver from Texas Instruments, supporting up to 8 Mbps data rate, SPI interface, and 1 channel. From $1.31 in stock with worldwide shipping.
TVS1801DRBR is a single-channel transient voltage suppressor diode from Texas Instruments with 24.4V nominal breakdown voltage and 27.4V max clamping voltage in a compact SOT-23 package. From $0.49 in stock with worldwide shipping.
LM5146QRGYTQ1 is a 100V voltage-mode PWM synchronous buck controller from Texas Instruments, supporting 5.5V–100V input range with pulse width modulation control. Ideal for industrial and automotive power supplies. From $3.32, in stock worldwide shipping.
Use the download button to access the TPS563249DDCR schematic symbol, PCB footprint, and 3D model.
4 channel, 10-MHz, Low-Noise, RRIO, CMOS Operational Amplifier for Cost-Sensitive Systems
Counter ICs
TMUX1109RSVR is a 5V/±2.5V low-leakage 4:1 dual-channel precision analog multiplexer with 155MHz bandwidth and 16-pin QFN package, ideal for signal routing in test equipment, data acquisition, and communications systems. From $1.725, in stock worldwide shipping.
TLV3701CD is a single nanopower high-voltage comparator from Texas Instruments, featuring push-pull output, 5mV offset voltage, and 150nA quiescent current for ultra-low power designs. From $0.64 in stock worldwide shipping.
TLV3701IDR is a single nanopower push-pull comparator from Texas Instruments. It features ultra-low supply current of 0.85 µA, 5 mV input offset voltage, and rail-to-rail output. Ideal for battery-powered systems. From $0.79, in stock, worldwide shipping.
LM5164DDAT is a high-voltage synchronous buck controller from Texas Instruments. It supports 6V to 100V input voltage with a single output, ideal for industrial and automotive power conversion. From $1.19, in stock with worldwide shipping.
3.8-V to 36-V, 2-A synchronous step-down voltage converter
SN74LS04NS is a hex inverter IC from Texas Instruments, featuring 6 independent NOT gates with TTL-compatible inputs and outputs. Operates at 5V supply with propagation delay of 9ns typical. From $0.41 in stock with worldwide shipping.
LP5521TMX/NOPB is a 3-channel RGB LED driver with programmable engine by Texas Instruments. Key specs: 3 independent PWM channels, I2C interface, 5mA to 25.5mA per channel current control. Available worldwide with fast shipping.
Digital Bus Switch ICs 2.5V 3.3V LO VLTG HI Dual FETBus Switch
SN74LVC1G07DCK3 is a single buffer/driver with open-drain output from Texas Instruments LVC logic family, supporting 1.65V to 5.5V supply, 32mA sink current, and -40°C to +125°C operation. From $0.0285 in stock worldwide shipping.
16-bit Microcontrollers - MCU
HD3SS3202IRSVR is a two-channel differential 2:1/1:2 USB 3.1 mux and demux with 10 GHz bandwidth and low insertion loss. Supports high-speed signal switching for USB Type-C applications. From $0.63 in stock with worldwide shipping.
Motor / Motion / Ignition Controllers & Drivers
TPS71718DSET is a 150mA, high-PSRR, low-noise LDO regulator with ultra-low quiescent current and 300mV max dropout voltage, ideal for portable and noise-sensitive applications. From $0.48, in stock worldwide shipping.
Use the download button to access the TPS51117PWR schematic symbol, PCB footprint, and 3D model.
Automotive reinforced isolated amplifier with 2V input range, 275MHz bandwidth, and 1500V isolation voltage for accurate voltage sensing. Features high CMTI performance for robust operation in noisy industrial environments. From $6.12 in stock worldwide shipping.
Quad 6V, improved offset, low-power rail-to-rail input/output op amp
Automotive Catalog Hex Buffer/Driver With Open-Drain Outputs
TCAN1051-Q1 is an automotive fault-protected CAN FD transceiver with 5 Mbps data rate and AEC-Q100 qualification. Designed for in-vehicle networks, it offers loop delay symmetry and unpowered node protection. From $1.11, in stock with worldwide shipping.
The SN74LS175NE4 is a quadruple D-type flip-flop IC with clear, featuring 30 MHz max frequency, 4-bit storage, and TTL LS-family logic. From $0.485, in stock with worldwide shipping.
2A High Efficiency Step-down Buck Converter with forced PWM in SOT Package
SN74AUC2GU04DCKR is a dual inverter (NOT gate) IC from Texas Instruments AUC logic family, featuring ultra-low voltage operation (0.8V–2.7V), 2 independent inverter channels, 15pF load capacitance, and 9mA output drive. From $0.2751, in stock with worldwide shipping.
LM4040AIM3-2.0 is a precision 2.048V shunt voltage reference from Texas Instruments with ±0.5% accuracy, 15mA operating current, and ultra-low temperature coefficient. From $0.98 in stock with worldwide shipping.
SN74HC373NE4 is a high-speed CMOS octal D-type transparent latch with tri-state outputs, featuring 3-state bus driving capability, active-low output enable control, and 150pF load capacitance support. From $0.337 in stock worldwide shipping.
The CD4572UBEE4 is a CMOS Hex Gate IC from Texas Instruments, featuring six logic gates including 2-input NOR and NAND gates in a 16-pin DIP package with 50pF load capacitance and guaranteed specifications across industrial temperature ranges. From $0.50 in stock with worldwide shipping.
Use the download button to access the SN74LS221NSR schematic symbol, PCB footprint, and 3D model.
SN75452BPE4 is a dual high-speed peripheral NAND gate-based driver from Texas Instruments, featuring open-collector outputs, gated inputs, and built-in overcurrent protection. Supports 2-bit driver configuration in a DIP-8 package. From $0.496, in stock worldwide shipping.
Automotive Fault Protected CAN Transceiver With Flexible Data-Rate
TPS6209733QWRGTRQ1 is a 2A automotive-grade synchronous step-down converter supporting 2.5V–6V input with PWM voltage-mode control. Features AEC-Q100 qualification, wettable flanks QFN package, and wide output range. From $0.9986 with worldwide shipping.
Use the download button to access the UCC2946DTR schematic symbol, PCB footprint, and 3D model.
High-Performance Current-Mode PWM Controller
TCAN337GD is a high-speed CAN FD transceiver from Texas Instruments supporting up to 5 Mbps data rate with single-channel operation. It features low electromagnetic emissions and robust fault protection. From $1.29, in stock worldwide shipping.
TLC6C5816QPWPRQ1 is an automotive-grade 16-bit serial-input LED driver with built-in diagnostics and fault reporting. It supports 16 constant-current output channels with SPI interface and AEC-Q100 qualification. From $0.92, in stock worldwide shipping.
Controller 1.6V to 6.5V 6-Pin USON T/R
TPS55160QPWPRQ1 is an AEC-Q100 qualified synchronous buck-boost converter supporting 3.6V to 36V input, 1A output, and 2MHz switching frequency with current-mode PWM control. From $4.28, in stock worldwide shipping.
Use the download button to access the LM5141RGER schematic symbol, PCB footprint, and 3D model.
SN74ALS74ANSR is a dual D-type flip-flop IC from Texas Instruments in ALS logic family, featuring 34MHz max frequency, 50pF load capacitance, and SOP-14 package. From $0.582 in stock with worldwide shipping.
CMOS Presettable Binary Up/Down Counter (Dual Clock with Reset)
Use the download button to access the TLV8542DR schematic symbol, PCB footprint, and 3D model.
16 MHz Ultra-Low-Power Microcontroller With 1 KB FRAM, 0.5 KB SRAM, 12 IO, 8 ch 10-bit ADC
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote