Integrated Circuit

MCP40D18T-103E/LT is a 7-bit I2C digital potentiometer from Microchip with a 10 kΩ end-to-end resistance and 128 wiper positions. It supports a 2-wire I2C serial interface for microcontroller-programmable resistance adjustment and is packaged in a compact 6-pin SOT-23 for space-constrained applications.

Microchip MCP40D18T-502E/LT is a single-channel 7-bit I2C digital potentiometer with 50 kΩ end-to-end resistance, 128 steps, and a 2 kHz bandwidth in a compact SOT-23-6 package. It enables software-controlled resistance adjustment for gain, offset, and calibration circuits. Available worldwide with fast shipping.

Microchip MCP40D17T-103E/LT is a single-channel 7-bit digital potentiometer with 10 kΩ end-to-end resistance and 128 positions, controlled via I2C 2-wire serial interface, in a compact 6-pin SOT-23 package for programmable gain and bias adjustment.

Microchip MCP4019T-103E/LT is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 5 pins, 7-bit, 2°C in SOT23 (5-Pin). From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

MCP40D17T-502E/LT is a single-channel 7-bit I2C digital potentiometer from Microchip with 5 kΩ end-to-end resistance, 128 wiper positions, and 2 kHz bandwidth in a 6-pin SOT-23 package. It enables software-controlled analog tuning for bias, gain, and offset adjustment in compact embedded designs.

Microchip MCP4011-502E/MS is a single-channel digital potentiometer with 64 resistive steps and a 5 kOhm end-to-end resistance, controlled via an increment/decrement interface in a compact 8-pin MSOP package. It offers 2 kHz nominal bandwidth for analog signal path adjustment applications. Available from stock with worldwide shipping.

The MCP3204-CI/SL is a 12-bit, 4-channel successive approximation ADC from Microchip with SPI interface, housed in a 14-pin SOIC package. It accepts analog input voltages up to 5 V, converts in as little as 6 µs, and achieves a linearity error of less than 0.05%. Ideal for multi-channel sensor data acquisition, industrial monitoring, and battery measurement systems.

The MCP4021-202E/SN is a single-channel non-volatile digital potentiometer from Microchip with 64 resistance steps and a 2.1 kΩ end-to-end resistance. It uses an increment/decrement control interface and retains its wiper position in non-volatile memory through power cycles. Housed in an 8-pin SOIC package for easy PCB integration in calibration and adjustment circuits.

Microchip MCP3428 is a 16-bit delta-sigma ADC with 4 differential input channels, programmable gain amplifier up to 8x, and I2C interface. Available in TSSOP-14 package, RoHS compliant, in stock with worldwide shipping.

Microchip MCP4021-202E/MS is a single-channel 7-bit digital potentiometer with 2.1 kOhm end-to-end resistance, 64 wiper steps, and nonvolatile memory in an MSOP-8 package. Controlled via Up/Down interface. Available from stock worldwide.

MCP3221A5T-E/OT is a 12-bit successive approximation ADC from Microchip with I2C interface, 22 ksps sampling rate, and 5 V analog input support. Available in a tiny SOT-23-5 package for compact sensor designs.

Microchip MCP4019T-502E/LT is a single-channel 7-bit digital potentiometer with 5 kΩ end-to-end resistance and I2C interface in a tiny SC70-5 package. Offers 128 wiper positions with non-volatile memory for power-on state retention and operates from 2.7 V to 5.5 V. Available from stock with worldwide shipping.

Microchip MCP4012T-502E/CH is a single-channel digital potentiometer with 64 resistance steps and 5 kOhm end-to-end resistance. Features increment/decrement SPI-compatible control interface in compact SOT-23-6 package. Available from stock worldwide with fast shipping.

The MCP4018T-103E/LT is a single-channel, 128-position digital potentiometer from Microchip with a 10 kΩ end-to-end resistance, controlled via a 2-wire I2C-compatible serial interface, housed in a compact SOT-23 6-pin package, suitable for programmable gain, offset, and calibration applications.

Microchip MCP4017T-103E/LT is a single-channel 7-bit I2C digital potentiometer with 10 kΩ end-to-end resistance and 128 wiper positions in a tiny SOT-23-6 package. Available from stock with worldwide shipping.

The MCP3550-50E/SN is a single-channel 21-bit delta-sigma ADC from Microchip with a maximum sample rate of 125 SPS and a linearity error of 0.006%. It features a simple SPI-compatible serial interface and operates from an analog input range of -0.1 V to 5.5 V. Available in stock with worldwide shipping from authorized distributors.

MCP4011-202E/SN is a single-channel, 64-position I2C-compatible digital potentiometer from Microchip with a 2 kΩ end-to-end resistance and increment/decrement control interface. It operates from 1.8 V to 5.5 V and is housed in an SOIC-8 package. Available from stock with worldwide shipping.

Microchip MCP4011-503E/SN is a single-channel 50 kΩ digital potentiometer with 64 steps controlled via increment/decrement interface. Housed in an 8-pin SOIC package, it provides programmable resistance for audio, calibration, and gain-control applications in compact PCB layouts.

Microchip MCP3426A0-E/MS is a 16-bit delta-sigma ADC with 2 differential input channels accepting ±2.048 V signals, communicating over I2C in a compact 8-pin MSOP package. From $1.85 in stock worldwide shipping.

Microchip MCP3901A0-E/SS is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 20 pins, -40°C to 125°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

MCP4011-103E/MS is a single-channel, 64-step increment/decrement digital potentiometer with 10 kOhm resistance from Microchip in a compact MSOP-8 package. It features a 1 kHz nominal bandwidth, RoHS-compliant Pb-free construction, and a simple 2-wire up/down control interface. Available from stock worldwide with fast shipping.

Microchip MCP3553-E/SN is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 8 pins, 22 bit, -40°C to 125°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

MCP3550-60E/SN is a 22-bit delta-sigma analog-to-digital converter by Microchip with SPI interface and low-power operation in an 8-pin SOIC package. Key specs: ±2.5 V analog input range, 0.0006% maximum linearity error, 67.3 ms maximum conversion time. Available from stock with worldwide shipping.

Microchip MCP3906A-I/SS is a dual-channel energy meter AFE IC in a 24-pin SSOP package, providing two sigma-delta ADC channels for active and reactive energy measurement. RoHS-compliant and 3.3 V compatible. From $4 in stock worldwide shipping.

MCP4011-202E/MS is a single-channel 7-bit digital potentiometer from Microchip with a 2 kΩ end-to-end resistance and increment/decrement control interface. It operates with a 4 kHz bandwidth in an 8-pin MSOP package, suited for audio volume control, LCD brightness adjustment, and gain tuning in analog circuits.

Microchip MCP3553-E/MS is a single-channel 22-bit delta-sigma ADC with 60 SPS output rate, ±2.5V differential input range, SPI-compatible serial interface, and low noise operation in an 8-pin MSOP package. Available in stock worldwide with fast shipping.

Microchip MCP3550-50E/MS is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 8 pins, 21.9-Bit, -40°C to 125°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Microchip MCP3550-60E/MS is a 22-bit delta-sigma ADC with SPI interface accepting ±2.5 V differential input in an 8-pin MSOP package for precision low-power measurement. Available from stock with worldwide shipping.

MCP3423-E/UN is an 18-bit delta-sigma ADC with 2 differential input channels and an I2C interface in an MSOP-10 package. It offers programmable gain amplification and a 2.048 V reference with linearity error below 0.004%. Available from stock with worldwide shipping.

Microchip MCP25050-I/SL is an 8-bit CAN I/O expander in SOIC-14 package with SPI interface for CAN bus expansion. Lead-free e3 compliant with 7-week factory lead time. Available from stock with worldwide shipping.

Microchip MCP3422A0-E/MS is a 2-channel, 18-bit delta-sigma ADC with I2C interface, programmable gain amplifier of 1x to 8x, and ±2.048 V differential input range. Achieves up to 18-bit resolution at 3.75 SPS in an 8-pin MSOP package. Available from stock with worldwide shipping.

Microchip MCP3427-E/UN is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 10 pins, 16-bit, -40°C to 125°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

MCP3424-E/ST is an 18-bit, 4-channel delta-sigma ADC with a ±2.048 V input range and I2C interface, housed in a 14-pin TSSOP package. It delivers 0.0035% maximum linearity error and selectable programmable gain, making it ideal for precision sensor measurement applications.

Microchip MCP1824T-3302E/DC is a fixed 3.3 V LDO linear regulator with 300 mA output, 200 mV typical dropout voltage, and 6 V max input in a SOT-223-5 package. Ideal for regulated 3.3 V rails in consumer and industrial embedded systems.

MCP3422A0-E/SN is an 18-bit delta-sigma analog-to-digital converter from Microchip, featuring 2 differential input channels and an I2C interface in an SOIC-8 package. It accepts differential input voltages from -2.048 V to +2.048 V with 0.0035% maximum linearity error. Designed for precision measurement applications including industrial sensors, medical instrumentation, and data acquisition systems.

Microchip MCP2003-E/SN is a LIN bus transceiver in SOIC-8 package supporting the LIN 2.0 protocol. Features a single transceiver channel operating at up to 20 kbps with 8V to 18V bus supply range. Available in stock with worldwide shipping at competitive pricing.

Microchip MCP2200-I/MQ is a USB 2.0 full-speed to UART serial converter with 8 GPIO pins in a 20-pin QFN package. Supports data transfer rates up to 1 Mbps with 12 MHz USB clock and requires no external crystal. Available from authorized distributors with worldwide shipping.

MCP3301-CI/SN is a 13-bit successive approximation ADC from Microchip with a single differential input channel, ±5 V analog input range, and SPI interface in an 8-pin SOIC package for precision measurement.

MCP2140A-I/SO is an IrDA standard infrared communications controller by Microchip Technology, supporting serial data rates up to 115.2 kbps and integrating the physical layer framing in a single 18-pin SOIC package. Key specs: SIR (Serial Infrared) IrDA 1.2 compliant, UART interface to host MCU, 2.7 V to 5.5 V supply range. Pb-free SOIC-18 package suits space-constrained wireless data link designs.

The MCP3202-CI/SN is a 12-bit successive approximation ADC from Microchip with SPI interface supporting up to 5.5 V analog input. It offers two configurable input channels, a maximum conversion time of 6.66 µs, and a max linearity error of 0.0488%. Available in SOIC-8 package from stock worldwide.

The MCP2004-E/SN is a single-channel LIN bus transceiver from Microchip designed for automotive and industrial serial communication. It integrates one LIN transceiver function in an 8-pin SOIC package with RoHS-compliant Pb-free lead finish.

The Microchip MCP2036-I/SL is a consumer circuit integrated circuit in a SOIC-14 package. It offers reliable performance in a compact 3.90mm plastic housing with 14 pins. Available from stock with worldwide shipping.

Microchip MCP3204-BI/SL is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 14 pins, -40°C to 85°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Microchip MCP3202-CI/ST is a 12-bit successive-approximation ADC with 2 channels and SPI interface in a TSSOP-8 package. Offers up to 5.5V analog input, 6.66 µs maximum conversion time, and 0.049% linearity error for precise analog measurement. Cost-effective and available in stock worldwide for fast shipping.

Microchip MCP2155-I/SO is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 18 pins, -40°C to 85°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

The MCP2515-e/ST is a standalone CAN bus controller with SPI interface supporting up to 1 Mbps CAN and 40 MHz SPI clock, offering 3 transmit and 2 receive buffers in a 20-pin TSSOP package for industrial and automotive network applications. Available from stock worldwide with fast shipping.

The MCP3002-I/SN is a 10-bit, 2-channel successive approximation ADC with SPI interface operating from 2.7 V to 5.5 V supply and converting in under 3.125 µs maximum. Available in an 8-pin SOIC package from Microchip, it is an easy-to-use analog-to-digital converter for microcontroller-based sensor acquisition systems.

MCP3202-BI/SN is a 12-bit successive approximation ADC with dual differential or single-ended inputs, SPI interface, and up to 5.5 V analog input range in an 8-pin SOIC package. Designed for precision data acquisition in embedded systems.

Microchip MCP2510T-I/SO is a stand-alone CAN controller with SPI interface, 25 MHz maximum clock frequency, and 3V minimum supply voltage at 16 MHz in an SOIC-18 package. It enables CAN bus connectivity for microcontrollers lacking built-in CAN peripherals.

The MCP3001-I/SN is a 10-bit successive-approximation ADC from Microchip with a single-channel SPI interface operating from 2.7 V to 5.5 V at up to 200 ksps. Maximum conversion time is 3.57 µs, enabling fast real-time signal acquisition. Available from stock worldwide.