Integrated Circuit

Analog Switch ICs Quad DPDT Audio Data Switch

VISHAY - DG4052EEQ-T1-GE3 - ANALOGUE MUX, 2 CH, 4:1, TSSOP-16

ARM Microcontrollers - MCU LPC541xx MCU

LT1800IS5#PBF from Linear Technology is a amplifier for measurement front ends, current sensing, instrumentation, and analog signal chains. Key specifications include 12.6V, 80MHZ, 0A, 5 pins, SOT-23 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SOT-23 format supports standard assembly and sourcing workflows.

SOIC-8

TS78L15CS from Taiwan Semiconductor is a Integrated Circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 0.3%, 0.15%, 8 pins, SOP package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SOP format supports standard assembly and sourcing workflows.

The 14-bit ISL5314 is a complete direct digital synthesizer (DDS) system in a single 48 Ld LQFP package. A 48-bit programmable carrier NCO (numerically controlled oscillator) and a high-speed 14-bit digital-to-analog converter (DAC) are integrated into a stand-alone DDS. The DDS accepts 48-bit center and offset frequency control information via a parallel processor interface. A 40-bit frequency tuning word can also be loaded via an asynchronous serial interface. Modulation control is provided by 3 external

LINEAR TECHNOLOGY - LTC7149IFE#PBF - DC/DC CONV, SYNC BUCK, 3MHZ, TSSOP-28

LINEAR TECHNOLOGY - LTC7149EUFD#PBF - DC/DC CONV, SYNC BUCK, 3MHZ, QFN-28

LINEAR TECHNOLOGY - LTC7149IUFD#PBF - DC/DC CONV, SYNC BUCK, 3MHZ, QFN-28

The 844N255I is a 6-output clock synthesizer designed for wireless infrastructure clock applications. The device uses IDT's fourth generation FemtoClock® NG technology for an optimum of high clock frequency and low phase noise performance, combined with a low power consumption and high power supply noise rejection. The reference frequency is selectable and the following frequency is supported: 25MHz. The synthesizer generates selectable 156.25MHz, 125MHz, 100MHz, 50MHz and 25MHz clock signals. The device is

Non-dissipative internal and adjustable Over Power Protection (OPP) circuits; Frequency Foldback down to 26 kHz and Skip-Cycle in light load conditions; Internal Ramp Compensation; Frequency jittering from full load to skip-cycle; Latch input for OVP and OTP implementations; See NCP1251 for integrated Over Voltage Protection (OVP) monitoring on the Vcc pin

Accelerometers 1.71-3.6V XYZ 2/8g low bandwidth

ROHS COMPLIANT, MS-012AA, SOIC-8

IRS27951SPBF is a International Rectifier integrated circuit for automotive, industrial, and embedded control designs. It uses a 8-pin SOP package with protected driver functions. From RFQ pricing with stock checks and worldwide shipping.

17 X 17 MM, 1 MM PITCH, FBGA-256

Linear Voltage Regulators High-Voltage, Micropower, Single/Dual Linear Regulators with Supervisory Functions

LEAD FREE, MS-012AC, SOIC-16

TLE9221SX from Infineon is a Integrated Circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 10000Mb, 16 pins, -40°C to 150°C, SSOP-16 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SSOP-16 format supports standard assembly and sourcing workflows.

ROHS COMPLIANT, TSSOP-16

74VHC595; 74VHCT595 - 8-bit serial-in_serial-out or parallel-out shift register@en-us

SOIC-16

The IDT F2912 is a high reliability, low insertion loss 50Ω SPDT (SP2T) absorptive RF switch designed for a multitude of wireless and other RF applications. This device covers a broad frequency range from 0.009 MHz to 9000 MHz. In addition to providing low insertion loss, the F2912 also delivers excellent linearity and isolation performance while providing 50 ohm terminations to the unused RF input port.The F2912 uses a single positive supply voltage of 3.3V supporting three states using either 3.3 V or 1.8

DFN-6

The Kingbright KB817B is a 4-pin DIP single-channel optocoupler with 35 V collector-emitter breakdown, 50 mA max LED forward current, and 130% minimum current transfer ratio. UL Recognized and VDE Approved for signal isolation in industrial and consumer applications. In stock with worldwide shipping.

The KB817A is a single-channel phototransistor optocoupler from Kingbright in a DIP-4 package, offering 80% minimum current transfer ratio, 35 V collector-emitter voltage, and UL/VDE approval for safe galvanic isolation in industrial and consumer circuits.

SOT-26, 6 PIN

Uses patented Quiet Series™ noise/EMI reduction circuitry; 0.9V to 3.6V VCC supply operation; High Static Drive (IOH/IOL)±24 mA @ 3.00V VCC±18 mA @ 2.30V VCC±6 mA @ 1.65V VCC±4 mA @ 1.4V VCC±2 mA @ 1.1V VCC±20 µA @ 0.9V VCC; Extremely High Speed tPD1.5 ns typ for 2.7V to 3.6V VCC1.8 ns typ for 2.3V to 2.7V VCC1.9 ns typ for 1.65V to 1.95V VCC3.2 ns typ for 1.4V to 1.6V VCC5.9 ns typ for 1.1V to 1.3V VCC12.0 ns typ for 0.9V VCC; 3.6V overvoltage tolerant I/O's at VCC from 0.9V to 3.6V; Ultra small MicroPak™

Micron M25P16-VMN6P, SPI 16Mbit Flash Memory, 5ns; 3V, SOIC, 8-Pin

SOIC-8

VNC2-32Q1C-TRAY from FTDI Chip is a connector for board-to-board, cable, panel, and embedded interconnect assemblies. Key specifications include 33 pins, QFN-32 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The QFN-32 format supports standard assembly and sourcing workflows.

Gate-Treiber 5A H-BRIDGE

Obsolete - Linear Voltage Regulator, LDO, 500 mA

LDO Voltage Regulators 500MA LDO

Reg IC, CMOS, Vin6V, 3.3V/200mA, SOT-25 Toshiba TCR2EF33,LM(CT, LDO Voltage Regulator, 150mA, 3.3 V ±1%, 1.5 → 5.55 Vin, 5-Pin SOT-25

RF Amplifier .7-1.2GHz NF .65dB 5.5Volt -40C +85C

3 X 3 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, PLASTIC, QFN-16

SOT-89, 3 PIN

Maxim Integrated MAX3061EEKA#TG16 is an integrated circuit for electronic assemblies. It is specified around 8 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

Maxim Integrated MAX3060EEKA#TG16 is an integrated circuit for electronic assemblies. It is specified around 8 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

Multiplexer Switch ICs 16:1 Precision

Multiplexer Switch ICs

MAX306EUI+,Multiplexer Switch IC

MAXIM INTEGRATED PRODUCTS - MAX306EWI+T - ANALOGUE MUX, SINGLE, 16:1, WSOIC-28

Transmitter/Receiver RS422/RS485 SOT23-8 Maxim MAX3062EEKA#TG16, Line Transceiver, RS-422/ RS-485, 5 V, 8-Pin SOT-23

Automatic Battery Back-Up Switch

Support is limited to customers who have already adopted these products.The ICL7663S Super Programmable Micropower Voltage Regulator is a low power, high efficiency positive voltage regulator which accepts 1.6V to 16V inputs and provides adjustable outputs from 1.3V to 16V at currents up to 40mA. It is a direct replacement for the industry standard ICL7663B offering wider operating voltage and temperature ranges, improved output accuracy (ICL7663SA), better temperature coefficient, guaranteed maximum supply

60V, 300mA, Ultra-Small, High-Efficiency, Synchronous Step-Down DC-DC Converters

60V, 300mA, Ultra-Small, High-Efficiency, Synchronous Step-Down DC-DC Converters

Use the download button to access the SRV05-4L-TP schematic symbol, PCB footprint, and 3D model.