Integrated Circuit

Motor / Motion / Ignition Controllers & Drivers 100-V max, simple three-phase gate driver with bootstrap diodes

Texas Instruments TPS37B010122DSKR is a dual-channel 65 V window voltage supervisor with adjustable under- and overvoltage thresholds, ultra-low quiescent current, and a programmable time-delay function in a compact 10-pin SON package rated from -40°C to 125°C. It monitors two independent supply rails simultaneously to protect downstream loads from both undervoltage and overvoltage faults. Available from stock worldwide with competitive pricing and fast shipping.

Gate Drivers 100-V max simple three-phase gate driver with bootstrap diodes

Texas Instruments TPS51211DSCR is a high-performance single synchronous step-down PWM controller in a 10-pin WSON package, accepting 3 V to 28 V input. It provides adjustable output from 0.7 V to 2.6 V with voltage-mode control for CPU and memory power rails.

TVS Less Automotive Reverse Battery Protection Ideal Diode Controller

Precision Amplifiers Dual-channel, precision, 50-µV offset voltage, 40-MHz wide-bandwidth, RRIO CMOS op amp

Texas Instruments TPSM82903 is a high-efficiency synchronous buck converter module with integrated inductor, delivering 3 A output from a 3 V to 17 V input supply with ultra-low quiescent current. It combines controller, MOSFETs, and inductor in a single compact package for minimal BOM. Available from stock worldwide with competitive pricing.

AEC-Q100 qualified for automotive applications: – Device temperature grade 1: –40°C to +125°C, TA – Device HBM ESD Classification Level 2 – Device CDM ESD Classifcation Level C6 • Available in wettable flank QFN (WRKS) package • Wide operating voltage range: 2 V to 6 V • Schmitt-trigger inputs allow for slow or noisy input signals • Low power consumption – Typical ICC of 100 nA – Typical input leakage current of ±100 nA • ±7.8-mA output drive at 6 V

The TLV3601DBVT is a 2.5 ns high-speed rail-to-rail comparator from Texas Instruments with a push-pull output and 5 µA maximum input bias current. Key specs: 2.5 ns propagation delay, 5 mV input offset voltage, 5-pin SOT-23 package. Available from stock with worldwide shipping.

Precision Amplifiers Ultra-high precision, zero-drift, low-input-bias-current op amp

Shift Shift Register 1 Element 8 Bit 16-VQFN (4x3.5)

The PTLV3604DCKT is an 800 ps high-speed rail-to-rail input comparator from Texas Instruments with LVDS outputs, featuring a 5 µA bias current and 5000 µV maximum input offset voltage. It is housed in a 6-pin SOT-23 package for compact high-speed signal detection in data communications and test equipment.

Translation - Voltage Levels

Use the download button to access the BQ51013BQWRHLRQ1 schematic symbol, PCB footprint, and 3D model.

The TPS7A2028PYCJR is a 300 mA ultra-low-noise, low-IQ LDO linear regulator from Texas Instruments with high PSRR, a 140 mV maximum dropout voltage, and fixed 2.8 V output from a 3.1 V to 6 V input. Its 0.013% maximum load regulation ensures stable output for precision RF and analog circuits in a 4-ball BGA package. Available worldwide with competitive pricing.

Use the download button to access the LM2593HVSX-5.0/NOPB schematic symbol and PCB footprint.

RF System on a Chip - SoC Single-chip 76-GHz to 81-GHz automotive radar sensor integrating antenna on package, DSP and MCU

TLV61070ADBVR is a current-mode PWM/PFM boost switching regulator by Texas Instruments with 0.5 V to 5.5 V input range. Key specs: current-mode control with PFM technique, 6-pin SOT-23 package, 15-year YTEOL. From $0.80, in stock with worldwide shipping.

60 V 1000/2000 mA 3-phase gate driver

Digital Signal Processors & Controllers - DSP, DSC Fixed/Floating Pnt Dgtl Sigl Processor

The TMP126EDCKRQ1 is an AEC-Q100 automotive-qualified SPI temperature sensor from Texas Instruments with 0.25°C maximum accuracy and 175°C maximum operating temperature. It provides 14-bit resolution, integrated CRC error checking, and a slew-rate alert output in a 6-pin SOT-23 package measuring 2 mm × 1.25 mm. Available on tape and reel for automated automotive assembly.

TPS92623QPWPRQ1 is an AEC-Q100-qualified automotive 3-channel high-side constant-current LED driver from Texas Instruments with thermal sharing. It drives up to 9 LED segments across 3 channels and is designed for 12 V automotive lighting systems in a 16-pin HTSSOP package. Available from stock worldwide with fast shipping.

Battery Management High-side protector for single-cell li-ion and li-polymer batteries 8-X2QFN -40 to 85

Gate Drivers 600-V 50-mΩ GaN with integrated driver and protection 32-VQFN -40 to 125°C

Switching Controllers Half-bridge PWM controller with integrated auxiliary bias supply and regulated pre-biased start-up 28-WQFN -40 to 125

Use the download button to access the TPS564247DRLR schematic symbol, PCB footprint, and 3D model.

Clock Buffer 4-output clock buffer for PCIe Gen 1 to Gen 5 32-VQFN -40 to 105

Digital to Analog Converters - DAC 12-bit 2-channel lo w-power voltage/curr

Use the download button to access the SN74CBTLV3257RGYR schematic symbol, PCB footprint, and 3D model.

Supervisory Circuits Precision window supervisor for OV & UV monitoring with window watchdog timer & programmable delay 10-VSON -40 to 125

TMS320C6748EZWT4 is a 32-bit fixed/floating-point DSP processor in a 361-ball NFBGA package supporting 16-bit external data bus and floating-point arithmetic. It features boundary scan (JTAG) and a maximum clock frequency of 30 MHz for embedded signal processing. Available from stock with worldwide shipping.

TPS2561AQDRCTQ1 is an automotive-grade dual-channel N-channel load switch from Texas Instruments with adjustable current limiting up to 2.5 A per channel. It operates from a 2.5 V to 6.5 V input supply in a compact 10-pin VSON 3 mm × 3 mm package. Available from stock with worldwide shipping.

CAN Interface IC Automotive CAN FD transceiver with wake/inhibit 14-VSON -40 to 150

Use the download button to access the LM393LVDGKR schematic symbol, PCB footprint, and 3D model.

General-Purpose Six-Channel Automotive Reinforced Digital Isolators with Robust EMC

Texas Instruments TPS78425BQWDRBRQ1 is an AEC-Q100 qualified 300 mA low-dropout voltage regulator with high PSRR and enable pin for automotive applications. Dropout voltage is only 115 mV at full load, input range 3 V to 6 V, in SON-8 package. Available from authorized distributors with worldwide shipping.

Audio Amplifier 1 Circuit Rail-to-Rail SOT-23-5

Dual, 16-Bit, 1230 MSPS, TxDAC+ Digital-to-Analog Converter

Analog Devices AD7124-4BCPZ, 18-bit Serial ADC Differential, Pseudo Differential, Single Ended Input, 32-Pin LFCSP WQ

The ADA4807-2ARMZ is a dual ultra-low-power operational amplifier from Analog Devices with 120MHz bandwidth, rail-to-rail I/O, and 1.6µA max bias current, in an 8-pin small outline package, in stock worldwide.

Low Cost CMOS, High Speed, Rail-to-Rail Amplifier (Triple)

AD818ARZ-REEL7, Video Op Amp, 130MHz 500V/??s Rail to Rail, 8-Pin SOIC N

Voltage References Ultracompact Prec 2.5V

Voltage References Ultracompact Prec 5V

Four-Quadrant Multiplier

RS-232 Interface IC LOW POWER, 3V, RS-232 I.C.

Dual IF Receiver

Analog Devices, Audio Codec Stereo Audio 12-channel 24bit- 192kHz Serial 64-Pin LQFP

LDO Voltage Regulators 800mA ULN LDO 3.3Vo

4.8 kHz, Ultralow Noise, 24-Bit Sigma-Delta ADC with PGA and AC Excitation