Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
ISO1430 Board Design for Isolated RS-485/RS-422
Design and validate an ISO1430 isolated RS-485/RS-422 board with practical termination, power, timing, protection, and test guidance.
Oct 24, 2026
TPS543320RPYR Buck Converter Design Validation Guide
Validate a TPS543320RPYR buck design through exact-part documentation, power-stage calculations, layout review, and repeatable bench tests.
Oct 24, 2026
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
All Integrated Circuit Components
Showing 32,551–32,600 of 77,666
► Maximum temperature coefficient (TCVOUT): ► 0.8 ppm/°C (D grade 0°C to 70°C) ► 1 ppm/°C (C grade 0°C to 70°C) ► 2 ppm/°C (B grade −40°C to +125°C) ► 4 ppm/°C (A grade −40°C to +125°C) ► Output noise (0.1 Hz to 10 Hz): ► 1 μV p-p at VOUT of 2.048 V typical ► Initial output voltage error: ► B, C, D grade: ±0.02% (maximum) ► Input voltage range: 3 V to 15 V ► Operating temperature: ► A grade and B grade: −40°C to +125°C ► C grade and D grade: 0°C to +70°C ► Output current: +10 mA source/−10 mA s
Analog to Digital Converters - ADC 16-Bit 500ksps Ultra Lo Pwr SAR
Digital Potentiometers
ANALOG DEVICES - ADG5434BRUZ-REEL7 - ANALOGUE SWITCH, QUAD, SPDT, TSSOP-20
The ADL5363 is a 2300 MHz to 2900 MHz balanced mixer with integrated LO buffer and RF balun from Analog Devices. It delivers high linearity and low conversion loss suitable for 4G LTE and 5G base station transceiver designs. Available in a compact QFN package with worldwide shipping.
The ADSP-CM409CBCZ-AF is a 32-bit floating-point DSP by Analog Devices based on the ARM Cortex-M4 core, running at 240 MHz with 2 MB on-chip memory in a 212-ball CSP BGA package. It features a 16-bit external data bus, 24-bit address bus, and boundary scan for advanced motor control and industrial applications. Available from authorized distributors with worldwide shipping.
RS-232 Line Drivers/Receivers
SPST Switches 1 Circuit IC Switch 1:1 2.5Ohm SOT-23-6
50 mA, High Voltage, Micropower Linear Regulator
RF Switch ICs GaAs MMIC SP4T Non-Refl Swtch DC
4 Circuit IC Switch 2:1 14Ohm 20-TSSOP
LFCSP-16
RS-232 Interface IC 3V RS-232 I.C.
Digital Potentiometers
Low Power Selectable Gain Differential ADC Driver, G = 1, 2, 3
Digital Potentiometers
Switching Voltage Regulators 2.5kV DC/DC Cnvtr IC
50 mA, High Voltage, Micropower Linear Regulator
ROHS COMPLIANT, SOIC_N-14
Low Power, Selectable Gain Differential ADC Driver, G = 1, 2, 3
SOIC-16
MO-187AA, MSOP-8
Low Power Selectable Gain Differential ADC Driver, G = 1, 2, 3
SOIC-16
ROHS COMPLIANT, MS-013AA, SOIC-16
Precision Thermocouple Amplifiers with Cold Junction Compensation
Low cost and easy to use Pretrimmed for J or K type thermocouples Internal cold junction compensation High impedance differential input Standalone 5 mV/°C thermometer Reference pin allows offset adjustment Thermocouple break detection Laser wafer trimmed to 1°C initial accuracy and 0.025°C/°C ambient temperature rejection Low power: <1 mW at VS = 5 V Wide power supply range Single supply: 2.7 V to 36 V Dual supply: ±2.7 V to ±18 V Small, 8-lead MSOP
Audio, Dual-Matched NPN Transistor
QSOP-20
Board Mount Temperature Sensors 0.25 Deg C Accurate 16-Bit Digital I2C
Temperature Sensor Digital I2C LFCSP16EP Analog Devices ADT7420UCPZ-R2 Temperature Sensor 16-Pin LFCSP, -40 → +150 °C
ANALOG DEVICES - ADF4355-3BCPZ - PLL, SYNTHESIZER/VCO, 6.6GHZ, LFCSP-32
Analog-to-Digital Converter
SOIC-16
ADA4950-1YCPZ-R2 is a low power, selectable gain differential ADC driver from Analog Devices supporting gains of 1, 2, and 3 with differential output. It operates in a compact 16-lead QFN package with wide supply voltage range. Available from stock worldwide with fast shipping.
ADC Driver
Dual, 200 mA, Low Noise, High PSRR Voltage Regulator
Quad J-FET Op-Amp
Ultralow Power, Low Distortion ADC Driver
Analog Devices ADUM7640ARQZ PCB SMT 6-channel Digital Isolator, 1000 V, 20-Pin
Digital Isolators 8mm creepage 2-Ch 5kV Dig Iso Int DC/DC
Digital Isolator 7-CH 17MHz SSOP20 Analog Devices ADUM3151BRSZ PCB SMT 7-channel Digital Isolator for SPI, 3750 V ac, 20-Pin SSOP
Precision Amplifiers IC 1mV JFet Input
Isolated Switch Regulator with Integrated Feedback
Linear Voltage Regulators 500mA LDO 3.0Vout
Analog Devices AD5676RBRUZ, 8-channel 16 bit DAC, 20-Pin TSSOP
BGA-160,RF Digital-to-Analog Converters
IC, 1 AXIS ACCELEROMETER, 1.7G
5 kV, 7-Channel, SPIsolator Multiple Peripheral, Digital Isolator for SPI
Supervisory Circuits with Watchdog and Manual Reset
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote