Integrated Circuit

Audio Amplifiers 3.3W Mono Class D Amplifier

MAXIM INTEGRATED PRODUCTS - MAX9744ETH+T - AUDIO AMP, CLASS D, 22.5W, TQFN-44

Single channel driver, 8-lead SOIC

HIROSE(HRS) - FH52E-20(10)SB-1SH(99) - FFC / FPC Board Connector, ZIF, 1 mm, 10 Contacts, Receptacle, FH52 Series, Surface Mount, Bottom

TRS10E65C is a Toshiba diode for PCB and equipment builds. Key specs include 1.7 V, Transistor Outline, Vertical, 0°C to 175°C. From inquiry pricing with in-stock sourcing options and worldwide shipping.

Toshiba TK39A60W is a 600 V, 38.8 A N-channel silicon power MOSFET using advanced DTMOS IV trench gate technology with a maximum drain-source on-resistance of 65 milliohm and an integrated freewheeling diode. It combines low conduction losses with high avalanche ruggedness for demanding power conversion applications. Available from authorized distributors with worldwide shipping.

ON Semiconductor MOC3043MX is an integrated circuit for electronic assemblies. It is specified around 6 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

8 X 13 MM, 1.20 MM HEIGHT, HALOGEN AND LEAD FREE, TFBGA-90

Nexperia TEA1716T/1 is an integrated circuit for electronic assemblies. It is specified around 24 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

The Renesas ISL317xE are ±15kV IEC61000 ESD protected, 3. 3V powered single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without violating the RS-485 specification's 32 unit load maximum, and without using repeaters. For example, in a remote utility meter reading system, individual meter readings are r

The Renesas ISL317xE are ±15kV IEC61000 ESD protected, 3. 3V powered single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without violating the RS-485 specification's 32 unit load maximum, and without using repeaters. For example, in a remote utility meter reading system, individual meter readings are r

LINEAR TECHNOLOGY - LTC4318IUF#PBF - Specialized Interface, I2C, SMBus, I2C Bus & SMBus Systems Applications, Servers, Telecom, 2.25 V

The LTC4311 is an I2C/SMBus accelerator from Linear Technology in a 6-pin SC-70 package, operating from 1.6 V to 5.5 V, that boosts bus line rise times to enable high-speed multi-device I2C networks.

LINEAR TECHNOLOGY - LTC4317IDHC#PBF - ADDRESS TRANSLATOR, I2C/SMBUS, 5.5V, DFN

Renesas Electronics UPD720231AK8-612-BAE-A, USB Controller, 480MBps, SCSI, Serial ATA, USB 2.0, USB 3.0, 3.3 V, 5 V

The 502 Loco™ is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip's ROM is the ability to generate six different multiplicati

The 502 Loco™ is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip's ROM is the ability to generate six different multiplicati

Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs

Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs

The 502 Loco™ is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip's ROM is the ability to generate six different multiplicati

The 502 Loco™ is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip's ROM is the ability to generate six different multiplicati

SOP-6

ANTIMONY AND HALOGEN FREE, ROHS COMPLIANT, SOT-25, 5 PIN

IC,Filter,MAX295ESA+ Maxim MAX295ESA+, Active Filter, Low Pass Filter, 8th Order Switched Capacitor 50kHz, 8-Pin SOIC

Maxim MAX291CSA+, Active Filter, Low Pass Filter, 8th Order Switched Capacitor 25kHz, 8-Pin SOIC

SRAM 3.3V 32Kx16 COM Sync Dual Port SRAM

ADAPTER, HD D-SUB, 44POS, PLUG-RCPT

The F2923 is a low insertion loss 50Ω SP2T (SPDT) absorptive RF Switch designed for a multitude of wireless and other RF applications. This device covers a broad frequency range from 300 kHz to 8000 MHz. In addition to providing low insertion loss, industry leading isolation at 2 GHz and excellent linearity, the F2923 also includes a patent pending constant impedance (K|z|) feature.

Typical Propagation Delay Time Under 20 ns with Input Falling or Rising; Non-inverting Input Logic with DIM Control Input for PWM Dimming Down to 0.1% for Hybrid Dimming; 13 ns Typical Rise Time and 9 ns Typical Fall-Time with 1 nF Load; 4.5 to 18 V Operating Range; Internal Resistors Turn Driver Off If No Inputs; 2.5 A Sink / 1.8 A Source at VOUT = 6 V; Rated from -40°C to 125°C Ambient; 6-Lead, 2 x 2 mm MLP or 5-Pin, SOT23 Packages; TTL Inputs Independent of Supply Voltage; MillerDrive™ Technology

TSSOP-16

D SUB CONN, STANDARD, RCPT, 25POS

DIP-4

4 Way Through Hole DIP Switch 4PST

LINEAR TECHNOLOGY - LTC4306CGN#PBF - IC, MUX W/BUFFER, 4CH 2-WIRE, 24SSOP

WiFi / 802.11 Development Tools Photon without Headers, in a tray

TLP759(J,F) from Toshiba is a integrated circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 0A, 0.025A, 5000V, 0.008A, DIP-8 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The DIP-8 format supports standard assembly and sourcing workflows.

TLP290-4(E from Toshiba is a Integrated Circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 6A, 80V, 4CHANNELS, 50%, Small Outline Packages package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The Small Outline Packages format supports standard assembly and sourcing workflows.

Slew Rate of 1.3 V/µs; Common Mode Input Includes Ground; Output Current to 1.0 A; Zero Deadband Crossover Distortion; Excellent Gain and Phase Margins; Single or Split Supply Operation; Internal Thermal Shutdown; Wide Bandwidth of 1.1 MHz

Full self test and electronic lockout; Self syncing internal oscillator adjusts to AC mains frequency to guarantee full resolution on 50 and 60 Hz distribution systems; Randomized testing sequence to noise sensitivity and potential interactions on the AC mains; High SCR drive current (up to 5 mA)

Low Offset Voltage: 14 µV typ, 50 µV max at 25°C; Zero Drift: 0.25 µV/°C max; Low Noise: 1 µVpp, 0.1 Hz to 10 Hz; Quiescent Current: 21 µA typ, 35 µA max at 25°C; Rail−to−Rail Input and Output; Internal EMI Filtering; Supply Voltage: 1.8 V to 5.5 V

SOP-8

LoRa Packet Radio Breakout

0.150 INCH, MS-012, SOIC-16

RF Development Tools Adafruit RFM69HCW Transceiver Radio Breakout - 868 or 915 MHz - RadioFruit

74HC112DB,112 from Nexperia is a integrated circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 1Ma, 50pF, 20000000Hz, 0.0052A, SSOP1 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SSOP1 format supports standard assembly and sourcing workflows.

SOP-14

74HC(T)112 - dual JK flip-flop with set and reset; negative-edge trigger@en-us

Gate Drivers 5 kV 5 V UVLO HS/LS isolated gate driver

SOT-108, SO-14

SILICON LABS - SI8234AB-D-IS - Digital Isolator, 2 Channel, 30 ns, 4.5 V, 5.5 V, WSOIC, 16 Pins