Integrated Circuit

Microchip MCP9701A-E/TO is a linear active thermistor IC in a through-hole TO-92-3 package that converts temperature to an analog voltage. It provides a 19.5 mV/°C sensitivity with ±4°C accuracy from -40°C to +125°C. Low cost and simple interface make it ideal for temperature monitoring in consumer and industrial applications.

Microchip MCP6561RT-E/OT is a single-channel comparator operating from 1.8V supply with ultra-low 5 nA bias current. It features push-pull output and 10 mV input offset voltage in a compact 5-pin SOT-23 package for portable and battery-operated designs.

MTCH108-I/SS is a Microchip 8-channel capacitive touch controller IC designed for single-electrode touch sensing applications. It supports up to 8 independent capacitive touch inputs and comes in a 20-pin SSOP package. Ideal for consumer appliances, HMI panels, and industrial control interfaces requiring reliable touch detection without a microcontroller.

PIC10F202-I/P is a microcontroller by Microchip. Key specs include Bit Size: 8; CPU Family: PIC10. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP9701-E/TO is a temperature sensor by Microchip. Key specs include Accuracy-Max (Cel): 6 Cel; Body Height: 4.826 mm. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MICROCHIP - MTCH6102-I/SS - CAPACITIVE TOUCH SENSOR, 15 CH, SSOP-28

Microchip MTCH6102-I/MV is a capacitive proximity and touch sensor controller operating from 1.8 V to 3.6 V supply. It integrates gesture recognition and touch detection in a 28-pin UQFN package with a 260 °C peak reflow temperature rating. Designed for low-power human interface applications requiring reliable proximity detection without mechanical contacts.

Microchip MTCH105-I/ST is a 5-channel capacitive touch controller with simple I/O output interface. It supports direct open-drain outputs for each touch input without requiring firmware or external MCU for basic touch detection. Available in a 14-pin TSSOP package for compact HMI designs.

Linear battery charge controller for single-cell Li-Ion and Li-Polymer batteries with programmable charge current and preconditioning. Integrates charge status outputs, thermal regulation, and automatic recharge detection in a compact 10-pin DFN package. Available from Microchip in RoHS-compliant packaging with worldwide stocking.

MCP73833-BZI/UN is a highly integrated single-cell lithium-ion and lithium-polymer battery charger IC from Microchip, available in a 10-pin MSOP package, supporting a programmable charge current up to 1 A with thermal regulation and preconditioning for deeply discharged cells.

MCP9802A0T-M/OT is a Microchip digital temperature sensor with I2C/SMBus interface and up to 12-bit resolution. It features a programmable alert output and ±3°C maximum accuracy over its operating range. Supplied in a miniature SOT-23-5 package suited for space-constrained thermal monitoring applications.

MTCH101-I/OT is a single-channel capacitive touch sensor IC from Microchip, designed to replace mechanical buttons with a reliable touch interface. It provides a current output and operates in a compact SOT-23-6 package measuring 2.9 mm × 1.55 mm, making it ideal for low-profile consumer and industrial touchpad designs.

Use the download button to access the MCP73833-GPI/UN schematic symbol, PCB footprint, and 3D model.

PLASTIC, MSOP-8

MCP8063-E/MD is an integrated circuit by Microchip. Key specs include Analog IC - Other Type: 3-PHASE BRUSHLESS DC MOTOR...; JESD-30 Code: S-PDSO-N8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP6N11T-001E/MNY is a CMOS instrumentation amplifier with 35 MHz bandwidth, 3 mV maximum input offset voltage, and 62 dB minimum CMRR operating up to 5.5 V supply. It offers rail-to-rail input and output for single-supply sensor signal conditioning. Available in compact 8-pin TDFN package with worldwide shipping.

MCP8025-115E/PT is a 3-phase brushless DC motor gate driver from Microchip with integrated LIN interface, supporting 6-step commutation and featuring a 48-pin TQFP package for compact industrial and automotive BLDC motor control designs.

MCP79522-I/MS is a clock IC by Microchip. Key specs include Additional Feature: ALSO OPEARTES AT 1.8V MIN SUPPLY...; Clock Frequency-Max: 0.032 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP6L94T-E/SL, Quad Op Amp, 10MHz Rail-Rail, 2.4 → 6 V, 14-Pin SOIC

Microchip MCP73826-4.2VCHTR, Charge Management Controller Lithium-Ion, 6-Pin SOT-23

DSPIC33FJ64MC706-I/PT is a microcontroller by Microchip. Key specs include Bit Size: 16; Clock Frequency-Max: 64 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

The MCP6S91-E/P is a single-channel SPI-programmable gain amplifier (PGA) from Microchip featuring rail-to-rail input and output swings for maximum dynamic range. It supports selectable gains from 1 V/V to 32 V/V via an SPI interface and operates from a 2.5 V to 5.5 V supply. Available in an 8-pin PDIP package with RoHS-compliant e3 finish and broad global distribution.

MCP6N11-005E/SN is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.005 µA; Bandwidth (3dB)-Nom: 35 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP6V12-E/MS is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.005 µA; Common-mode Reject Ratio-Min: 119 dB. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP6S93-E/UN, Programmable Gain Amplifier 2, Rail to Rail Input/Output, 10-Pin MSOP

Microchip MCP2140-I/P is an IrDA standard serial infrared controller that bridges a UART host to a 115.2 kbps IrDA link, supporting SIR mode and automatic baud rate detection. It integrates encoder, decoder, and framing in a single chip, reducing external component count. Housed in an 18-pin PDIP package for easy through-hole integration.

Microchip MCP6S28-I/P is a programmable gain amplifier (PGA) with 8 input channels, rail-to-rail input/output, SPI interface, and single-supply operation from 2.5 V to 5.5 V in a 16-pin PDIP package.

Microchip MCP6S92-E/MS, Programmable Gain Amplifier 2, Rail to Rail Input/Output, 8-Pin MSOP

MCP6N11-100E/SN is a precision instrumentation amplifier from Microchip with 35 MHz gain-bandwidth product, 88 dB CMRR, and a wide 1.8 V to 5.5 V supply range in an 8-pin SOIC package. It targets high-accuracy differential signal acquisition in industrial and medical systems. Available in stock with worldwide shipping.

Microchip MCP6492-E/SN is a dual low-power rail-to-rail operational amplifier with 7.5 MHz gain-bandwidth product, operating from 2.4 V to 5.5 V supply. It features a maximum input offset voltage of 1500 µV and 70 dB minimum CMRR, packaged in an 8-pin SOIC for portable and battery-powered signal conditioning applications.

MCP6562-E/MS is a Microchip dual push-pull output comparator in an 8-pin MSOP package, featuring 20 ns response time, 1.8 V to 5.5 V supply range, and 5 nA typical bias current for fast, low-power threshold detection.

MCP4361-502E/ML is a quad-channel 5 kΩ digital potentiometer from Microchip with 257 wiper positions, SPI 3-wire serial interface, 2 kHz bandwidth, and non-volatile EEPROM storage in a compact 20-pin QFN package for multi-axis analog control.

Microchip MCP6L92T-E/MS is a dual rail-to-rail op amp with 10 MHz gain-bandwidth, 91 dB CMRR, and 2.4 V to 6 V supply in an 8-pin MSOP package. Its 4 mV maximum input offset voltage and internal frequency compensation suit precision signal conditioning applications. Available from stock worldwide with competitive pricing.

Microchip MCP6547-I/P is a dual voltage comparator with open-drain outputs, operating from 1.6 V to 5.5 V single supply. It features 100 pA input bias current, 7 mV maximum input offset voltage, and 8-pin PDIP package, suitable for threshold detection and level-shifting circuits in mixed-voltage embedded systems.

DSPIC33EP256MU810-I/PT is a high-performance 16-bit digital signal controller from Microchip with 256 KB Flash and up to 60 MHz operation in a 100-pin TQFP package. It integrates a DSP engine with barrel shifter, 12-bit ADC, USB, CAN, and motor control PWM peripherals. Designed for motor drives, power conversion, and industrial automation requiring real-time signal processing.

MCP6L01UT-E/OT is an operational amplifier by Microchip. Key specs include Common-mode Reject Ratio-Nom: 78 dB; Input Offset Voltage-Max: 5000 µV. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP6L02T-E/MS is an operational amplifier by Microchip. Key specs include Common-mode Reject Ratio-Nom: 78 dB; Input Offset Voltage-Max: 5000 µV. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

The MCP6541UT-I/LT is a single comparator from Microchip with push-pull output, operating from 1.6 V to 5.5 V supply. It features a 7 mV maximum input offset voltage and 1 µA maximum bias current. Available in a compact SOT-23-5 package, ideal for battery-powered and portable applications.

MCP664-E/ST is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.005 µA; Common-mode Reject Ratio-Min: 66 dB. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP6H02-E/SN is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.025 µA; Common-mode Reject Ratio-Min: 84 dB. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP6L04T-E/ST is an operational amplifier by Microchip. Key specs include Common-mode Reject Ratio-Nom: 78 dB; Input Offset Voltage-Max: 5000 µV. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

The MCP6G01T-E/SN is a single-channel programmable gain instrumentation amplifier from Microchip with rail-to-rail input/output and 0.9 MHz bandwidth. It features software-selectable gain and a low bias current of 0.005 µA in an 8-pin SOIC package.

MCP4251-103E/P is a dual-channel 10 kΩ SPI digital potentiometer with 257 wiper positions in a 14-pin DIP package, ideal for precision analog adjustment in audio, industrial, and sensor calibration circuits.

MCP6547-E/SN is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.005 µA; Input Offset Voltage-Max: 7000 µV. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP6549-E/SL is a quad comparator with open-drain output operating from 1.6 V to 5.5 V supply. Features include 4 independent comparator channels with 7 mV max offset voltage and ultra-low 5 nA bias current. Ideal for battery-powered systems, voltage monitoring, and signal detection in SOIC-14 package.

The MCP6424-E/SL is a quad operational amplifier from Microchip with voltage-feedback architecture in a SOIC-14 package. It features a minimum CMRR of 75 dB, 90 dB typical, and ultra-low bias current of 50 pA max. In stock worldwide with fast global shipping.

Microchip MCP6546UT-E/OT is a single-channel open-drain output comparator operating from 1.6 V to 5.5 V supply. It features ultra-low quiescent current, 7 mV maximum input offset voltage, and 5 nA typical bias current, making it ideal for battery-powered and space-constrained applications. Available in a compact 5-pin SOT-23 package.

MCP6422-E/MS is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.00005 µA; Bias Current-Max (IIB) @25C: 0.00005 µA. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

The MCP6546T-I/OT is a single-channel open-drain output voltage comparator from Microchip operating on 1.6 V to 5.5 V supply with 50 ms propagation delay and 100 pA maximum bias current. It is housed in a compact SOT-23-5 package for space-constrained designs. Available in stock with worldwide shipping.

MCP6544-I/P is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.0001 µA; Input Offset Voltage-Max: 7000 µV. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.