Integrated Circuit

SOT-23W, 3 PIN

SSOP-8

SSOP-28

Use the download button to access the BM6104FV-CE2 schematic symbol, PCB footprint, and 3D model.

LDO Regulator1.5V 800mA Low IQ SOT223 EXAR SPX1117M3-L-1-5, LDO Voltage Regulator, 800mA, 1.5 V ±1%, 2.6 → 15 Vin, 3-Pin SOT-223

Power Integrations TOP221PN is a voltage-mode PWM switch IC in a DIP-8 package that integrates MOSFET, control, and protection into a single device for off-line flyback power supplies. Supports up to 0.28A output current with built-in current limiting and auto-restart. Available from stock with worldwide shipping.

Linear Technology LT3599EFE#PBF is a 40-segment LED display driver operating from 3.1 V to 30 V supply, housed in a 28-pin TSSOP package. It drives up to 40 LED segments and is available in stock worldwide.

IDT70V3599S133BCGI is a 4.5 Mb multi-port SRAM with 36-bit wide data bus and 133 MHz clock frequency by IDT. Key specs: 256-ball BGA package (S-PBGA-B256), 15 ns maximum access time, pipelined and flow-through architecture. Available in stock with worldwide shipping.

Würth Elektronik 687312124422 is a RoHS-compliant FFC/FPC female connector with tin over nickel termination finish, measuring 0.488" x 0.169" body. Designed for flexible flat cable connections in compact PCB applications. Available from authorized distributors with worldwide shipping.

Maxim Integrated MAX6008AESA+T is a precision two-terminal shunt voltage reference drawing only 1 µA quiescent current with a 2.5 V output in an 8-pin SOIC package, ideal for ultra-low-power ADC reference and battery-powered measurement circuits.

MAX6008AESA+ is a precision shunt voltage reference from Maxim Integrated providing a fixed 2.5 V output with ±30 ppm/°C temperature coefficient in an 8-pin SOIC package. It offers high accuracy with output range 2.495 V to 2.505 V and low operating current. Available in stock for worldwide shipping.

Diodes Inc. PAM8904QJER is a high-efficiency piezo haptic driver IC in a compact UQFN-16 (3.0 mm × 3.0 mm) package, delivering up to ±50 V output swing to drive piezo actuators from a 2.5 V to 5.5 V supply. It features programmable waveform generation and I2C interface for flexible haptic feedback control. Available from stock with fast worldwide shipping.

ON Semiconductor FAN5361UC19X is a 6 MHz synchronous buck regulator delivering up to 750 mA output current from a 2.3-5.5 V input range in a miniature BGA package. It supports both PWM and pulse-frequency modulation modes for high efficiency across load conditions. Note: this part is now obsolete.

Traco Power TEN 15-2422 is a 15 W encapsulated industrial DC/DC converter with a 2:1 input voltage range centered on 24 V and dual ±12 V regulated outputs, housed in a robust 2 inch × 1 inch metal package suitable for demanding industrial and embedded power applications.

Linear Technology LT1715HMS#PBF is a dual, high-speed comparator with 4 mV max input offset voltage and ±5 V supply range in a 10-pin MSOP package. Key specs: 7 µA max bias current, MSOP-10 footprint. Available in stock with worldwide shipping.

LT1715IMS#PBF is a dual high-speed comparator by Linear Technology in a 10-pin MSOP package. Key specs: 4 ns propagation delay, 2.7V to 12V supply range, CMOS/TTL-compatible outputs, and 6 µA max bias current. Ideal for zero-crossing detection, window comparator, and mixed-signal interface circuits.

LTC1998CS6#TRMPBF is a lithium-ion battery voltage detector IC from Linear Technology in a compact SOT-23-6 package. It features adjustable threshold detection with a single channel and operates reliably for battery monitoring applications. Ideal for portable devices requiring precise low-voltage protection and power management.

Maxim Integrated MAX4514CUK+T is a single-channel SPST CMOS analog switch in a 5-pin SOT-23 package operating from low supply voltages with low on-resistance. It switches analog signals in battery-powered and portable designs with minimal signal distortion. Available from authorized distributors with worldwide shipping.

Infineon SAF-C167CR-LM HA+ is a 16-bit MCU from the C166 family running at up to 25 MHz with on-chip ROM/RAM and CAN, serial, and timer peripherals in a QFP package. From $15.00, in stock, worldwide shipping.

Silicon Labs SI8605AC-B-IS1R is a 4-channel digital isolator with open-drain I2C support and 10 Mbps data rate, qualified for AEC-Q100 automotive use. Housed in a 16-pin SOIC package with 2.5 kV isolation rating. Available from stock worldwide with fast shipping.

Silicon Labs Si8605AB-B-IS1 is a bidirectional I2C digital isolator with 2.5 kV RMS isolation, supporting data rates up to 1.7 MHz in a compact SOIC-16 package. Operates from 1.7 V to 5.5 V supplies. From $1.80 in stock with worldwide shipping.

Silicon Labs Si8605AC-B-IS1 is a 4-channel I2C digital isolator with 1 Mbps data rate and 3.75 kVrms isolation in a 16-pin SOIC package. It operates from 2.5 V to 5.5 V on both sides with propagation delay under 10 ns. From $2.80, in stock with worldwide shipping.

Maxim Integrated MAX14803AEWZ+T is a 16-channel, high-voltage analog switch IC with low charge injection and 50 dB off-state isolation in a 110-WLCSP package. It integrates 16 SPST switch functions in a single compact device. From $3.50 in stock with worldwide shipping.

Maxim Integrated MAX14802CCM+T is a 16-channel SPST analog switch IC with low charge injection and high-voltage capability packaged in a 48-pin LQFP. Features 50 dB off-state isolation, 48 Ω maximum on-resistance, and 26 Ω matching for precise signal routing. Available in tape-and-reel with worldwide distribution.

Maxim Integrated MAX14803CCM+T is a 16-channel high-voltage SPST analog switch IC with low charge injection, housed in a 48-LQFP (7x7x1.4 mm) package. Provides 50 dB off-state isolation in a single compact IC for precision signal switching. Available in stock with worldwide shipping.

Maxim Integrated MAX14802CCM+ is a 16-channel SPST analog switch in a 48-pin TQFP package with 50 dB off-state isolation for precision signal routing. It is designed for high-density multiplexing in data acquisition and test equipment. Available from stock with worldwide shipping.

Diodes Inc. AP3036KTR-G1 is a 6-segment LED display driver IC in a compact SOT-23 6-pin package with single-function, non-multiplexed LED drive outputs. Supports up to 6 independent LED channels with built-in current regulation for uniform brightness. From $0.35 in stock with worldwide shipping.

Diodes Inc. AP3032KTR-G1 is an LED display driver IC in a 6-pin SOT-23 package capable of driving up to 28 segments with a single-function control interface. It operates as a compact, current-regulated driver optimized for 7-segment and alphanumeric LED panels. From $0.45, in stock, worldwide shipping.

Diodes Inc. AP3036BKTR-G1 is a single-function LED display driver IC with 6 output segments in a compact SOT-26 (TSOP6) 6-pin package. Drives up to 6 LED segments without multiplexing for indicator and status display applications. Available in tape-and-reel from stock worldwide.

Diodes Inc. AP3015KTR-G1 is a voltage-mode PWM/PFM boost switching regulator in a 5-pin SOT-23 package, accepting input voltages from 1.2 V to 12 V and boosting output up to 34 V. It features pulse frequency modulation for light-load efficiency and a COFF control technique for stable operation. Available in tape-and-reel for automated SMT assembly with global distribution and fast worldwide shipping.

Diodes Inc. AP3019AKTR-G1 is a single-function LED display driver IC in a 6-pin SOT-23 package with 5 output segments and no multiplexing capability. Designed for compact LED driving circuits in consumer and industrial displays. Available from stock with worldwide shipping.

Diodes Inc. AP3015AKTR-G1 is an adjustable step-up (boost) DC-DC converter capable of output voltages up to 34 V from a 1 V to 12 V input in a compact 5-pin SOT-23 package. It uses pulse-frequency modulation with COFF control for efficient, low-noise voltage conversion. Available from stock with worldwide shipping.

A25L080-F is an 8 Mbit serial Flash memory IC by AMIC Technology with SPI interface and 2.7 V to 3.6 V supply range in DIP-8 package. Key specs: 100 MHz max clock frequency, 100,000 write/erase cycle endurance, 20-year data retention. Suitable for embedded firmware storage and data logging in low-power microcontroller systems.

Maxim MAX3488AEGSA+ is a half-duplex RS-485/RS-422 line transceiver in an 8-pin SOIC package operating from a 3.0 to 3.6 V supply. Features differential Schmitt trigger inputs and supports data rates up to 250 kbps for robust industrial communication. Available in stock worldwide for fast delivery.

Maxim MAX3483AEASA+ is a single-channel RS-485/RS-422 line transceiver with differential Schmitt trigger inputs operating from a 3 V to 3.6 V supply in an 8-pin SOIC package. It supports half-duplex RS-485 communication with 1/8 unit load receiver for up to 256 nodes on a single bus. Available from stock worldwide with competitive pricing for industrial and commercial designs.

The MAX3490AEGSA+ is a Maxim Integrated RS-485/RS-422 line transceiver powered at 3.3V with ±20kV ESD protection and 20 Mbps data rate. It features a differential Schmitt trigger input and slew-rate limiting to reduce EMI in an 8-pin SOIC package. Available from authorized distributors with worldwide shipping.

Maxim MAX4899AEETE+T is a USB 2.0 high-speed fault-tolerant 3:1 and 4:1 multiplexer in a 16-pin QFN package. Supports data rates up to 480 Mbps with integrated ESD protection and overvoltage fault tolerance. From $1.80 in stock with worldwide shipping.

The ISL91107IR is a highly-integrated buck-boost switching regulator that accepts input voltages either above or below the regulated output voltage. Unlike other buck-boost regulators, this regulator automatically transitions between operating modes without significant output disturbance.This device is capable of delivering up to 2A of output current (PVIN = 2.8V, VOUT = 3.3V) and provides excellent efficiency due to its fully synchronous 4-switch architecture. No-load quiescent current of only 45µA also op

The ISL91107 is a highly-integrated buck-boost switching regulator that accepts input voltages either above or below the regulated output voltage. Unlike other buck-boost regulators, this regulator automatically transitions between operating modes without significant output disturbance.This device is capable of delivering up to 2A of output current (PVIN = 2.8V, VOUT = 3.3V) and provides excellent efficiency due to its fully synchronous 4-switch architecture. No-load quiescent current of only 45µA also opti

Cypress CY15B104Q-SXI is a 4 Mbit (512 KB) Serial SPI Ferroelectric RAM (F-RAM) with 2 V to 3.6 V supply range in an 8-pin SOIC package. Delivers unlimited read/write endurance, 100-year data retention, and up to 40 MHz SPI clock speed. Available from stock worldwide with same-day shipping.

SAMTEC TSW-109-25-F-S-RA is a 9-position, 2.54 mm pitch right-angle through-hole male header connector with gold-flash-over-nickel mating contacts and tin-over-nickel termination contacts, designed for reliable board-to-board and board-to-wire interconnects in electronic assemblies.

The 74LVC1G07W5-7 is a single-gate open-drain buffer IC from Diodes Inc., operating at 1.65V to 5.5V supply. Featuring a 5-pin SOT-23 package with 32mA sink current capability, it suits level translation and I2C bus buffering applications.

ON Semiconductor NLX1G74MUTCG is a single-bit CMOS D flip-flop with complementary outputs, operating from 1.65 V to 5.5 V supply, housed in an ultra-compact 8-bump XQCC package for space-critical digital logic designs.

NXP PCA9306DP1,125 is a dual bidirectional I2C-bus and SMBus voltage-level translator supporting standard and fast mode up to 400 kHz with a 3.3 ns maximum propagation delay in an 8-pin SOIC package. It enables seamless communication between 1.2 V to 5 V logic domains without directional control pins.

Linear Technology LTC2872CUHF#PBF is a dual RS-232/RS-485 multiprotocol transceiver in a 38-pin QFN package supporting both EIA-232 and EIA-422/485 standards with Schmitt trigger inputs and 4-driver architecture. It enables seamless protocol switching between RS-232 and RS-485 differential signaling in a single IC. Available with worldwide distribution for industrial and communications applications.

Infineon IFX20001MB V33 is a low-dropout (LDO) linear voltage regulator with a fixed 3.3 V output. Delivers up to 200 mA output current with low quiescent current and tight output accuracy. Available from stock with worldwide shipping.

Infineon IFX20001MBV33HTSA1 is a fixed 3.3V LDO voltage regulator with 30mA output and 4V to 45V input range. Features low dropout voltage of 0.25V nominal and ±4% output accuracy in a 5-pin SCT595 package. Available from stock worldwide.

Infineon IFX20001MBV50HTSA1 is a fixed-output LDO linear voltage regulator in a 5-pin SOT-23 package supporting 5.5 V to 45 V input with an ultra-low dropout voltage of 0.25 V nominal. Designed for automotive and industrial applications requiring stable regulation from wide-range supply rails. Available from authorized distributors with worldwide shipping.

Vishay NOMCT16035001AT1 is a rugged isolated SMD resistor network in SOIC package with 5kΩ (5000Ω) resistance per element and 0.1W power dissipation at 1.27mm lead spacing. Designed for precision signal conditioning and pull-up/pull-down networks in industrial electronics. Available from stock with worldwide shipping.

Tiny SOT-353 and SOT-553 Packages; 2.4 ns TPD at 5 Volts (typ); Source/Sink 24 mA at 3.0 Volts; Over-Voltage Tolerant Inputs and Outputs; Pin For Pin with NC7SZ32P5X, TC7SZ32FU, and TC7SZ32AFE; Chip Complexity: FETs = <100; Designed for 1.65 V to 5.5 V VCC; Pb-Free Packages are Available; Designed for 1.65 V to 5.5 V Vcc Operation