Integrated Circuit

16 Bit Digital to Analog Converter 2 16-TSSOP −40°C to +85°C

16 Bit Digital to Analog Converter 1 8-MSOP ,5V ,-40°C ~ 85°C ,8-MSOP(RM-8)

14 Bit Digital to Analog Converter 1 8-MSOP ,2.5V ~ 5.5V ,-40°C ~ 125°C ,8-MSOP , (RM-8)

DAC

Digital Rheostat

► 12 MHz multiplying bandwidth ► INL of ±0.5 LSB at 12 bits ► Pin-compatible 12-/14-bit current output DAC ► 2.5 V to 5.5 V supply operation ► 10-lead MSOP package ► ±10 V reference input ► 50 MHz serial interface ► 2.7 MSPS update rate ► Extended temperature range: −40°C to +125°C ► 4-quadrant multiplication ► Power-on reset with brownout detection ► 0.4 µA typical current consumption ► Guaranteed monotonic

Single Channel,Serial Input,Current Source and Voltage Output DACs

Analog Multiplier/Divider 4-Quadrant 14-CDIP

2.7 V to 5.5 V, 140 µA, Rail-to-Rail Voltage Output 12-Bit DAC in SOT-23 and MicroSOIC Packages

Single Channel,Serial Input,Current Source and Voltage Output DACs

Single Channel,Serial Input,Current Source and Voltage Output DACs

Single Channel,Serial Input,Current Source and Voltage Output DACs

Single-Channel, 12-/16-Bit, Serial Input, 4 mA to 20 mA, Current Source DAC, HART Connectivity

Single Channel, 12-Bit, Current Source & Voltage Output DAC, HART Connectivity

8 Bit Digital to Analog Converter 2 8-MSOP ,2.5V ~ 5.5V,-40°C ~ 105°C

Single Channel, 12-Bit, Current Source & Voltage Output DAC, HART Connectivity

Single-Channel, 12-/16-Bit, Serial Input, 4 mA to 20 mA, Current Source DAC, HART Connectivity

12 Bit Digital to Analog Converter 1 40-LFCSP-VQ (6x6) ,10.8V ~ 40V, -3V ~ 26.4V ,-40°C ~ 105°C , 158 mW

DAC

Single-Channel, 12-/16-Bit, Serial Input, 4 mA to 20 mA, Current Source DAC, HART Connectivity

10 Bit Digital to Analog Converter 2-40°C ~ 105°C 2.5V ~ 5.5V 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)

1024-/256-Position, 1% Resistor Tolerance Error, I2C Interface and 50-TP Memory Digital Rheostat

10 Bit Digital to Analog Converter 2-40°C ~ 105°C 2.5V ~ 5.5V 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)

10 Bit Digital to Analog Converter 2 8-MSOP

2.7 V to 5.5 V, 140 µA, Rail-to-Rail Output 12-Bit DAC

Digital Potentiometer 100k Ohm 2 Circuit 64 Taps I2C Interface 14-TSSOP

2.5 V to 5.5 V, 230 μA, Dual Rail-to-Rail Voltage Output 10-/12-Bit DACs ,Power-down to 200 nA at 5 V, 50 nA at 3 V,−40°C to +105°C

1024-/256-Position, 1% Resistor Tolerance Error, SPI Interface and 50-TP Memory Digital Rheostat

1024-/256-Position, 1% Resistor Tolerance Error, I2C Interface and 50-TP Memory Digital Rheostat

Digital Rheostat

1024-/256-Position, 1% Resistor Tolerance Error, I2C Interface and 50-TP Memory Digital Rheostat

2.5 V to 5.5 V, 230 μA, Dual Rail-to-Rail, Voltage Output 8-/10-/12-Bit DACs 300 μA @ 5 V −40°C to +105°C

AD5235BRU25 is a Analog Devices Power Supply for regulated power conversion, distributed supplies, industrial rails. Key specs include 0 A, -2.25V, -2.75V, 0.125 kHz and TSSOP. From $ price in stock worldwide shipping.

1024-/256-Position, 1% Resistor Tolerance Error, SPI Interface and 50-TP Memory Digital Rheostat

Digital Potentiometer 20k Ohm 1 Circuit 1024 Taps SPI Interface 10-MSOP

2.5 V to 5.0 V Micropower, Precision Series Mode Voltage References

Low input offset voltage: 150 µV maximum Low offset voltage drift over –55°C to +125°C: 1.2 μV/°C maximum Low supply current (per amplifier): 725 µA maximum High open-loop gain: 5000 V/mV minimum Input bias current: 3 nA maximum Low noise voltage density: 11 nV/√Hz at 1 kHz Stable with large capacitive loads: 10 nF typical Available in die form

Digital Potentiometers

Single-Supply Operational Amplifiers

Digital Potentiometer 10k Ohm 1 Circuit 1024 Taps SPI Interface 10-MSOP

AD5235BRU25-EP-RL7 is a dual-channel 25 kOhm nonvolatile digital potentiometer from Analog Devices with 1024 taps per channel and SPI-compatible interface in a 16-pin TSSOP package. Designed for precision analog signal conditioning, gain control, and offset adjustment in industrial applications.

System Management IC with Factory Programmed Quad Voltage Monitoring and Supervisory Functions

Fully Accurate, 12-/14-/16-Bit VOUT nanoDAC, Quad, SPI Interface, 4.5 V to 5.5 V in TSSOP −40°C to +125°C

16 Bit Digital to Analog Converter 4 16-TSSOP 2.7V ~ 5.5V,-40°C ~ 125°C

Micropower, OVP, RRIO, Quad Op Amp

Analog Devices AD5100YRQZ-1REEL is a factory-programmed 4-channel voltage monitoring and supervisory IC in a 16-pin SSOP package, providing simultaneous supervision of four supply rails with programmable thresholds and reset/fault outputs for system management in industrial and communications equipment. Available in stock with worldwide shipping.

16 Bit Digital to Analog Converter 4 16-TSSOP Fully Accurate, 16-Bit, Unbuffered VOUT, Quad SPI Interface, 2.7 V to 5.5 V nanoDAC in a TSSOP

2.5 V to 5.0 V Micropower, Precision Series Mode Voltage References

PWM Temperature Sensor

AMPLIFIER, CLASS G, 50mW, WLCSP-16