Integrated Circuit

Double channel high-side driver with analog current sense for automotive applications

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 512KB Flash, 160KB SRAM, analog, audio

LFQFP, QFP64,.47SQ,20

• Ultra-low-power with FlexPowerControl – 1.71 V to 3.6 V power supply – -40 °C to 85/125 °C temperature range – Batch acquisition mode (BAM) – 305 nA in VBAT mode: supply for RTC and 32x32-bit backup registers – 33 nA Shutdown mode (5 wakeup pins) – 125 nA Standby mode (5 wakeup pins) – 420 nA Standby mode with RTC – 2.8 μA Stop 2 with RTC – 110 μA/MHz Run mode (LDO mode) – 43 μA/MHz Run mode (@ 3.3 V SMPS mode) – 5 µs wakeup from Stop mode – Brownout reset (BOR) in all modes except shutdown

IC EPROM 256K PARALLEL 28CDIP

1.225V micropower shunt voltage reference

2 A, 1.5 MHz PWM step-down switching regulator with synchronous rectification

STMicroelectronics L5150GJ is an automotive-grade fixed 5 V low-dropout linear voltage regulator with up to 31 V input, 0.5 V max dropout, and tight 0.04% line regulation, available in a 12-pin SOIC package for vehicle electronics.

STMicroelectronics EMIF03SIM02M8 is a 3-line EMI filter in a flat-style SMD no-lead package for SIM card interface protection. It integrates ESD protection and EMI suppression in a single compact component. Available from stock with worldwide shipping.

STMicroelectronics STM32L451CCU6, 32bit ARM Cortex M4 Microcontroller, 80MHz, 512 kB Flash, 48-Pin UFQFPN

256-Kbit serial I²C bus EEPROM

Linear Voltage Regulators VLDV Reg Inhibit 0.45V 50uA 500mA

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC

Double channel high-side driver with analog current sense for automotive applications

Voltage References Precision micropower shunt voltage reference

SOT-323,3 PIN

Wide bandwidth, dual bipolar operational amplifier

Wide bandwidth, dual bipolar operational amplifier

Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash, integrated EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C, CAN

Precision micropower shunt voltage reference

Use the download button to access the STM32F303VEY6TR schematic symbol, PCB footprint, and 3D model.

High precision rail-to-rail operational amplifier

Operating range VCC = 2.5 V to 6 V • Rail-to-rail input and output • Extended Vicm (VDD - 0.2 V to VCC + 0.2 V) • Capable of driving a 32 Ω load resistor • High stability: 500 pF • Operating temperature range: -40 to 125 °C

128-Kbit serial SPI bus EEPROM with high-speed clock

LDO Voltage Regulators 150mA 1.5V to 5.5V 80mV 20uA 100kHz

SOP-14

Access line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, ADC

General purpose input/output rail-to-rail low-power operational amplifiers

ARM®-based 32-bit MCU, 16 to 64 KB Flash, 11 timers, ADC, DAC and communication interfaces, 2.0-3.6 V

40 V, 3.5 A quad power half-bridge digital audio amplifier

SOP-20

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

General purpose input/output rail-to-rail low-power operational amplifiers

STMicroelectronics TSV358AIYDT is a dual rail-to-rail input/output low-power operational amplifier in a small outline package, offering 80 dB typical CMRR and 125 nA bias current. Suited for battery-powered and precision signal-conditioning applications.

STMicroelectronics VIPER37HE is a fixed-frequency current-mode PWM controller IC for AC/DC flyback converters, supporting input voltages from 8.5 V to 23.5 V with an 800 V integrated power MOSFET rated at 30 mΩ on-resistance, operating up to 265 Vac. Available in DIP-10 package for isolated power supply designs.

TSV358IYDT is a dual operational amplifier from STMicroelectronics in SOP-8 package, featuring 60 dB minimum CMRR, 0.125 µA bias current, and rail-to-rail operation. Key specs include voltage-feedback architecture and frequency compensation. Available from stock with worldwide shipping.

Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash/192+4KB RAM, crypto, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC

Low noise and low drop voltage regulator with shutdown function

Input voltage from 1.5 to 5.5 V  Ultra low dropout voltage (80 mV typ. at 100 mA load)  Very low quiescent current (20 µA typ. at no load, 35 µA typ. at 150 mA load, 1 µA max in off mode)  Very low noise (33 µVRMS from 1 kHz to 100 kHz at VOUT = 1.8 V)  Output voltage tolerance: ± 2.0 % @ 25 °C  150 mA guaranteed output current  Wide range of output voltages available on request: 0.8 V to 4.5 V with 100 mV step  Logic-controlled electronic shutdown  Compatible with ceramic capacitor COU

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 512KB Flash, 160KB SRAM, analog, audio

150 mA low quiescent current low noise voltage regulator

VIPER115XSTR is a current-mode PWM switching regulator IC from STMicroelectronics in a 10-pin SSOP package, supporting input voltages from 4.5 V to 30 V. Competitive pricing available with worldwide shipping.

"Digital input quad power amplifier with built-in diagnostics features

High-performance and DSP with FPU, Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, DFSDM

8-bit ultra-low-power MCU, up to 64-KB Flash, 2-KB data EEPROM, RTC, LCD, timers, USARTs, I2C, SPIs, ADC, DAC, comparators

Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash, integrated EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C, CAN

QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE

Low noise and low drop voltage regulator with shutdown function

ARM Microcontrollers - MCU High-performance and DSP with FPU, Arm Cortex-M7 MCU with 64 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, HW crypto,SDRAM