Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
43,359 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
How to Choose a USB Controller: Certification, Integration, and SDK Quality Compared Across Microchip, STMicroelectronics, NXP, TI, and Renesas
Compare USB controllers from Microchip, STM, NXP, TI, and Renesas across certification difficulty, integration ease, and documentation/SDK quality to choose the right IC for your design.
May 28, 2026
ADAU1361BCPZ Application Note: Audio Codec Design Guide for Embedded Systems
Complete design guide for the ADAU1361BCPZ stereo 96kHz/24-bit audio codec: power supply filtering, PLL startup sequence, PCB layout, SigmaDSP integration, and troubleshooting.
May 28, 2026
LM66100QDCKRQ1 Design Guide: Ideal Diode and Reverse Polarity Protection for Automotive Power Rails
Complete application note for the LM66100QDCKRQ1 AEC-Q100 ideal diode controller: PMOS selection, threshold tuning, RPP integration, layout, and automotive design pitfalls.
May 28, 2026
LM2904BQDGKRQ1 Selection Guide: Automotive Dual Op-Amp Variants, Packages, and Alternatives
How to choose the right LM2904BQ automotive dual op-amp variant: AEC-Q100 grade, offset voltage, package, and non-automotive alternatives explained.
May 27, 2026
All Integrated Circuit Components
Showing 2,601–2,650 of 43,359
IF Diversity Receiver
IF Diversity Receiver
Dual Precision, Low Power BiFET Op Amp
Low Cost Analog Multiplier
Voltage-to-Frequency Converter
18 Bit Digital to Analog Converter 1 20-TSSOP
Complete Dual, 16-Bit, High Accuracy, Serial Input, Bipolar Voltage Output DAC
nanoDAC with 5 ppm/°C On-Chip Reference in SOT-23
Instrumentation Amplifier
Industrial Current/Voltage Output Driver with Programmable Ranges
Industrial I/V Output Driver
Current/Voltage Output Driver
Industrial Current/Voltage Output Driver with Programmable Ranges
Industrial Current/Voltage Output Driver with Programmable Ranges
Industrial Current/Voltage Output Driver with Programmable Ranges
ADC
Low power, small footprint, pin-compatible octal DACs AD5668: 16 bits AD5648: 14 bits AD5628: 12 bits 14-lead/16-lead TSSOP, 16-lead LFCSP, and 16-ball WLCSP On-chip 1.25 V/2.5 V, 5 ppm/°C reference Power down to 400 nA at 5 V, 200 nA at 3 V 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale or midscale 3 power-down functions Hardware LDAC and LDAC override function CLR function to programmable code Rail-to-rail operation
nanoDAC with 5 ppm/°C On-Chip Reference in SOT-23
10-Bit A/D Converter
Single-Channel, 12-/16-Bit, Serial Input, 4 mA to 20 mA, Current Source DAC, HART Connectivity
16 Bit Digital to Analog Converter 8 16-TSSOP
Complete, quad, 12-/14-/16-bit DACs Operates from single/dual supplies Software programmable output range +5 V, +10V, +10.8V, ±5 V, ±10 V, ±10.8 V INL error: ±16 LSB maximum, DNL error: ±1 LSB maximum Total unadjusted error (TUE): 0.1% FSR maximum Settling time: 10 µs typical Integrated reference: ±5 ppm/°C maximum Integrated reference buffers Output control during power-up/brownout Simultaneous updating via LDAC Asynchronous CLR to zero scale/midscale DSP/microcontroller-compatible serial inter
12, 16 Bit Digital to Analog Converter 8 16-TSSOP
DAC
Octal, 12-/14-/16-Bit SPI Voltage Output denseDAC with 5 ppm/°C On-Chip Reference
DAC
12 Bit DACs
Low power, small footprint, pin-compatible octal DACs AD5668: 16 bits AD5648: 14 bits AD5628: 12 bits 14-lead/16-lead TSSOP, 16-lead LFCSP, and 16-ball WLCSP On-chip 1.25 V/2.5 V, 5 ppm/°C reference Power down to 400 nA at 5 V, 200 nA at 3 V 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale or midscale 3 power-down functions Hardware LDAC and LDAC override function CLR function to programmable code Rail-to-rail operation
nanoDAC with 5 ppm/°C On-Chip Reference in SOT-23
nanoDAC
Octal SPI Voltage Output denseDAC with 5 ppm/°C On-Chip Reference
Converters - DAC 16bit, 1LSB, 2.7-5.5V with LDAC, Vlogica
16 Bit Digital to Analog Converter 1 28-TSSOP
12 Bit Digital to Analog Converter 1 8-MSOP ,2.7V ~ 3.3V ,-40°C ~ 105°C ,8-MSOP
DAC
DAC
True RMS-to-DC Converter
DAC
Single Channel,Serial Input,Current Source and Voltage Output DACs
Digital to Analog Converters - DAC 2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-/12-Bit nanoDAC? in 8-lead 3 mm 3 mm LFCSP
16 Bit Digital to Analog Converter 2 16-TSSOP −40°C to +85°C
16 Bit Digital to Analog Converter 1 8-MSOP ,5V ,-40°C ~ 85°C ,8-MSOP(RM-8)
14 Bit Digital to Analog Converter 1 8-MSOP ,2.5V ~ 5.5V ,-40°C ~ 125°C ,8-MSOP , (RM-8)
DAC
Digital Rheostat
► 12 MHz multiplying bandwidth ► INL of ±0.5 LSB at 12 bits ► Pin-compatible 12-/14-bit current output DAC ► 2.5 V to 5.5 V supply operation ► 10-lead MSOP package ► ±10 V reference input ► 50 MHz serial interface ► 2.7 MSPS update rate ► Extended temperature range: −40°C to +125°C ► 4-quadrant multiplication ► Power-on reset with brownout detection ► 0.4 µA typical current consumption ► Guaranteed monotonic
Single Channel,Serial Input,Current Source and Voltage Output DACs
Analog Multiplier/Divider 4-Quadrant 14-CDIP
2.7 V to 5.5 V, 140 µA, Rail-to-Rail Voltage Output 12-Bit DAC in SOT-23 and MicroSOIC Packages
Single Channel,Serial Input,Current Source and Voltage Output DACs
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote