Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 26,001–26,050 of 77,666
Low Power, Low Noise, Low Bias Current, Precision Dual RRO Op Amp
12 Bit Analog to Digital Converter 4 Input 4 Pipelined 48-LFCSP-VQ (7x7)
ADC
ADC
Input/Output Operational Amplifier
Operational Amplifiers
Operational Amplifiers
1.8 V Dual Analog-to-Digital Converter
Dual Precision, Rail-to-Rail Output Operational Amplifier
Digital-to-Analog Converter
24 MHz Rail-to-Rail Amplifiers with Shutdown Option
Analog Multiplexers
Low Power, Precision Rail-to-Rail Output Quad Op Amp
14 Bit Digital to Analog Converter 8 14-TSSOP
Input/Output Operational Amplifier
Low Power, Low Noise, Low Bias Current, Precision Dual RRO Op Amp
Input/Output Operational Amplifier
Input/Output Operational Amplifier
Input/Output Operational Amplifier
Analog Devices AD737KRZ-RL is a dc-dc converter for electronic assemblies. It is specified around 8 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.
Precision, Dual-Channel Instrumentation Amplifier
Low power, single nanoDACs AD5660: 16 bits AD5640: 14 bits AD5620: 12 bits 12-bit accuracy guaranteed On-chip, 1.25 V/2.5 V, 5 ppm/°C reference Tiny 8-lead SOT-23, MSOP, and LFCSP packages Power-down to 480 nA @ 5 V, 200 nA @ 3 V 3 V/5 V single power supply Guaranteed 16-bit monotonic by design Power-on reset to zero/midscale 3 power-down functions Serial interface with Schmitt-triggered inputs Rail-to-rail operation SYNC interrupt facility
IC OPAMP ZERO-DRIFT 1 CIRC 8SOIC
16 Bit Digital to Analog Converter 4 28-SSOP 2.7V ~ 5.5V,-40°C ~ 125°C
Very Low Distortion, Precision Difference Amplifier
Low Cost Difference Amplifiers
8-SOP
Single-Channel, 12-/16-Bit, Serial Input, 4 mA to 20 mA, Current Source DAC, HART Connectivity
16-Bit ADC
General Purpose Amplifier 4 Circuit Rail-to-Rail 14-TSSOP
The AD5338BRMZ-1REEL7 is a dual 10-bit digital-to-analog converter with serial SPI interface, operating from 2.5V to 5.5V supply and -40°C to 105°C temperature range. It provides two independent analog output channels with 0.001V to 5.499V output swing for precision signal generation. Housed in an 8-pin MSOP/TSSOP package on a 7-inch tape-and-reel for high-volume automated board assembly.
Single-Channel, 12-/16-Bit, Serial Input, 4 mA to 20 mA, Current Source DAC, HART Connectivity
Voltage Output Temperature Sensors
8 MHz Rail-to-Rail Operational Amplifier
IC, ADC, 16BIT, 750KSPS
12-Bit 200 kSPS Complete Sampling ADC
1 kV RMS Quad-Channel Digital Isolators
1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier
MICREL SEMICONDUCTOR - KSZ8851-16MQL - MAC CTRLR, ENET, SGL PORT, 128PQFP
The MIC94093YC6-TR is a single-channel power distribution load switch IC from Microchip housed in a compact 6-pin SOT23 (SC70-6) package. It provides simple on/off power switching for downstream loads, offering a space-saving, RoHS-compliant solution ideal for battery-powered and portable electronic power rail sequencing applications.
MCP73834-CNI/MF is a 10 pins integrated circuit by Microchip. Key specs: 10 pins, Small Outline No-lead package, Use the download button to access the MCP73834-CNI/MF schematic symbol, PCB footprint, and 3D model.. From quote-based sourcing, in stock checks support worldwide shipping.
DSPIC33EP128GS808-E/PT is a 16-bit DSC from Microchip with 70 MIPS performance, 128 KB flash, 8 KB RAM, CAN interface, and integrated ADC and DAC in an 80-pin TQFP package. Optimized for power conversion and motor control with DSP-enhanced instruction set. From $8.50 in stock, worldwide shipping.
8-bit Microcontrollers - MCU 7KB, 512B RAM, 4xPWMs, Comparator, DAC, ADC, 4xCLC, CWG, 2xEUSART, SPI/I2C
NOR Flash 64K x 8 70 ns 4.5V-5.5V
Microchip PIC18F26J50T-I/ML is an 8-bit PIC18 microcontroller with full-speed USB, 64KB flash, 4KB RAM, and an ADC, operating up to 48MHz in a compact 28-pin VQFN package. NanoWatt technology enables low-power battery operation. Available in stock with worldwide shipping.
Microchip PIC32MK1024MCF064-I/PT is a 32-bit PIC32 microcontroller running at up to 120 MHz with 1 MB Flash. It integrates multiple CAN FD interfaces, USB, and a 12-bit ADC in a TQFP-64 package. Available from stock worldwide with 7-week lead time for motor control and industrial automation designs.
2.5/3.3v, 3.2Gbps Precision CML Dual-channel programmable Delay, QFN-24
RF Front End 8-Ch Programmable HV Ultrasound Beam
8-bit Microcontrollers - MCU 28KB Flash, 2KB RAM, 256B EE, 10b ADC2, DAC, Comp, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, SPI/I2C, IDLE/DOZE/PMD
TQFP-128
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote