Integrated Circuit

Use the download button to access the M48Z35Y-70MH1F schematic symbol, PCB footprint, and 3D model.

The STA8090EXGA is an AEC-Q100 qualified multi-constellation GNSS receiver SoC from STMicroelectronics, operating at 1.1 V nominal supply in a 169-ball TFBGA package. It supports GPS, GLONASS, and other satellite navigation systems for automotive-grade positioning applications.

The STA8090FGTR is a multi-constellation GNSS receiver IC from STMicroelectronics supporting GPS, GLONASS, Galileo, and BeiDou simultaneously, with -162 dBm tracking sensitivity and 12 Mbps data output. It operates from a 1.2 V nominal supply in a compact 99-ball TFBGA (5x6 mm) surface-mount package for high-precision navigation modules.

Use the download button to access the M48Z58Y-70MH1F schematic symbol, PCB footprint, and 3D model.

Use the download button to access the M41T83SMY6F schematic symbol, PCB footprint, and 3D model.

Buck Switching Regulator IC Positive Adjustable 0.85V 1 Output 1.5A 16-PowerTSSOP (0.173", 4.40mm Width)

Serial I²C bus real-time clock (RTC) with battery switchover

HTSSOP-16

4 Kbit, 2 Kbit and 1 Kbit serial SPI bus EEPROM with high-speed clock

Protected digital input termination with serialized state transfer

Switching Voltage Regulators 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current

4 Kbit, 2 Kbit and 1 Kbit serial SPI bus EEPROM with high-speed clock

4 Kbit, 2 Kbit and 1 Kbit serial SPI bus EEPROM with high-speed clock

4 x 42 W quad bridge car radio amplifier

Multifunction Smart Regulator with Lamp/Relay Diagnostic Driver

Voltage References Precision MicroPWR 1.225V Shunt REF

IC EPROM 256K PARALLEL 28CDIP

STMicroelectronics L5150GJ is an automotive-grade fixed 5 V low-dropout linear voltage regulator with up to 31 V input, 0.5 V max dropout, and tight 0.04% line regulation, available in a 12-pin SOIC package for vehicle electronics.

256-Kbit serial I²C bus EEPROM

Linear Voltage Regulators VLDV Reg Inhibit 0.45V 50uA 500mA

128-Kbit serial SPI bus EEPROM with high-speed clock

LDO Voltage Regulators 150mA 1.5V to 5.5V 80mV 20uA 100kHz

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

Low noise and low drop voltage regulator with shutdown function

Input voltage from 1.5 to 5.5 V  Ultra low dropout voltage (80 mV typ. at 100 mA load)  Very low quiescent current (20 µA typ. at no load, 35 µA typ. at 150 mA load, 1 µA max in off mode)  Very low noise (33 µVRMS from 1 kHz to 100 kHz at VOUT = 1.8 V)  Output voltage tolerance: ± 2.0 % @ 25 °C  150 mA guaranteed output current  Wide range of output voltages available on request: 0.8 V to 4.5 V with 100 mV step  Logic-controlled electronic shutdown  Compatible with ceramic capacitor COU

150 mA low quiescent current low noise voltage regulator

Low noise and low drop voltage regulator with shutdown function

Linear Voltage Regulator IC Positive Fixed 1 Output 200mA SOT-323-5

300 mA low quiescent current very low noise LDO (automotive for SOT23-5L package)

Use the download button to access the A5973ADTR schematic symbol, PCB footprint, and 3D model.

8-Kbit serial SPI bus EEPROM with high-speed clock

DMOS driver for three-phase brushless DC motor

8-Kbit serial SPI bus EEPROM with high-speed clock

200 mA low quiescent current and low noise LDO

Linear Voltage Regulators Prec 500mA Regs 24V 0.5A Output

Hex inverter

4 A - 800 V overvoltage protected AC switch

PACKAGE-3

JFET inputs, low input bias & offset current, (15nV/√Hz & 0.01%)

4 A - 800 V Overvoltage protected AC switch

Quad enhanced UA741 version with lower consumption

200 mA low quiescent current and low noise LDO 6-DFN (1.2x1.3), 13.2V, -40°C ~ 125°C

200 mA low quiescent current and low noise LDO

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

STM32L4A6RGT6TR is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller running up to 80 MHz with 1 MB flash and 320 KB SRAM in a 64-pin LQFP package. It features an FPU for 100 DMIPS performance, AES hardware encryption, USB OTG FS, audio interface, and multiple ADC/DAC channels. Designed for IoT edge nodes, wearables, and portable industrial devices demanding long battery life with high processing capability.

The SPC560P44L3BEAAR is a 32-bit automotive-grade microcontroller in a 100-pin LQFP package, clocked at up to 16 MHz with 32-bit data and address buses, integrated ADC, DMA channels, and 67 I/O lines, designed for body electronics, HVAC control, and gateway ECU applications in automotive systems.

TSX7191ILT is a low-power precision rail-to-rail operational amplifier from STMicroelectronics with a 9.0 MHz gain-bandwidth product, 16 V maximum supply, 450 µV maximum input offset voltage, and 50 pA bias current in a SOT-23-5 package. It serves precision signal conditioning, active filter, and sensor amplification applications requiring wide dynamic range on supplies up to 16 V.

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

STMicroelectronics M74HC04B1R, Hex Inverter, 2 → 6 V, 14-Pin PDIP