Integrated Circuit

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 384 Kbytes of Flash memory, 72 MHz CPU, MPU, CCM, 12-bit ADC 5 MSPS, PGA, comparators

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

Ultra-low-power dual core Arm Cortex-M4 MCU 64 MHz, Cortex-M0+ 32 MHz with 256 Kbytes of Flash memory, Bluetooth LE 5.2, 802.15.4, Zigbee, Thread, USB, AES-256

60 V, 60 mΩ single high-side switches with short start-up propagation delay

Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5.4 or 802.15.4 radio solution

The STM32F334K6T7XXX is a 32-bit ARM Cortex-M4 microcontroller with FPU running at up to 32 MHz, featuring 12-bit ADC, DAC, and DMA channels in a compact QFP package. It integrates high-resolution PWM timers specifically optimized for digital power conversion and motor control applications. Available in production quantities with worldwide shipping.

Gate Drivers High-density power driver-high volt enhance mode GaN half bridge w/gate driver

Audio Amplifiers Amp/DC Volume Cont

Multiprotocol LPWAN 32-bit Arm® Cortex®-M4 MCUs, LoRa®, (G)FSK, (G)MSK, BPSK, up to 256KB flash, 64KB SRAM

Multiprotocol LPWAN 32-bit Arm® Cortex®-M4 MCUs, LoRa®, (G)FSK, (G)MSK, BPSK, up to 256KB flash, 64KB SRAM

Multiprotocol LPWAN 32-bit Arm® Cortex®-M4 MCUs, LoRa®, (G)FSK, (G)MSK, BPSK, up to 256KB flash, 64KB SRAM

Access line, 16 MHz STM8S 8-bit MCU, up to 8 Kbytes Flash, data EEPROM,10-bit ADC, 3 timers, UART, SPI, I²C

MULTIWATT-15

STMicroelectronics STM32MP151CAA1 is a single Arm Cortex-A7 core microprocessor running at up to 650 MHz with an integrated Cortex-M4 co-processor, I/O supply of 1.71 V to 3.6 V, housed in a 448-ball BGA package. Available from stock worldwide for embedded Linux and real-time industrial applications.

Ultra-low-power with FPU Arm Cortex-M4 MCU 120 MHz with 1024 kbytes of Flash memory, USB OTG, DFSDM, CHROM-ART, AES, PKA

STMicroelectronics STM32L4Q5CGU6P is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, running up to 120MHz with 1MB Flash and 640KB SRAM in a compact QFN package. It features hardware cryptographic acceleration and DSP instructions for secure IoT and industrial embedded applications.

STMicroelectronics STM32L4P5CGU6 is an ultra-low-power 32-bit Arm Cortex-M4 MCU with FPU delivering 150 DMIPS, 1 MB Flash, 320 KB SRAM, and LCD-TFT controller in a compact QFN package. Integrates external SMPS for optimal energy efficiency. Available from stock with worldwide shipping.

Ultra-low-power Arm®Cortex®-M4 32-bit MCU+FPU, 150 DMIPS, up to 1-MB Flash memory, 320-KB SRAM, LCD-TFT, ext. SMPS

ARM® Cortex®-M0+ STM32G0 Microcontroller IC 32-Bit Single-Core 64MHz 64KB (64K x 8) FLASH 48-UFQFPN (7x7)

Includes ST state-of-the-art patented technology Ultra-low-power with FlexPowerControl • 1.71 V to 3.6 V power supply • -40 °C to 85/125 °C temperature range • Batch acquisition mode (BAM) • 150 nA in VBAT mode: supply for RTC and 32x32-bit backup registers • 22 nA Shutdown mode (5 wakeup pins) • 42 nA Standby mode (5 wakeup pins) • 190 nA Standby mode with RTC • 2.95 μA Stop 2 with RTC • 110 μA/MHz Run mode (LDO mode) • 41 μA/MHz Run mode (@ 3.3 V SMPS mode) • 5 µs wakeup from Stop mode • Br

SOP-10

Operational Amplifier, 2 Func, 13000uV Offset-Max, PDIP8

Ultra-low-power Arm®Cortex®-M4 32-bit MCU+FPU, 150 DMIPS, up to 1-MB Flash memory, 320-KB SRAM, LCD-TFT, ext. SMPS

Mainstream Value line, Arm Cortex-M0+ MCU with 128 Kbytes of Flash memory, 36 Kbytes RAM, 64 MHz CPU, 4x USART, timers, ADC, comm. I/F, 2-3.6V

STMicroelectronics STSPIN32F0251TR is an advanced 3-phase BLDC motor controller integrating an embedded STM32 Cortex-M0 MCU with 250 V gate drivers in a QFP package. It combines closed-loop motor control and power stage drive in a single chip. Available from stock with worldwide shipping.

PENTAWATT-5

Rail-to-rail input/output 10 µA, 450 kHz CMOS operational amplifiers

Mainstream Arm Cortex-M0+ MCU with 16 Kbytes of Flash memory, 8 Kbytes RAM, 64 MHz CPU, 2x USART, timers, ADC, comm. I/F, 1.7-3.6V

PENTAWATT-5

1.225V micropower shunt voltage reference

MEMS pressure sensor: 260-1260 hPa absolute digital output barometer

STMicroelectronics TSC2012IDT is a high-voltage, precision bidirectional current sense amplifier with 85 dB CMRR and 0.6 µA max bias current in a small outline package. It supports rail sensing on high-side or low-side shunts up to 60V common-mode voltage. Available in stock with worldwide shipping.

STMicroelectronics STM32H7VBT6 32-bit Arm Cortex-M7 microcontroller running at 480 MHz with 128KB flash and 1MB SRAM in LQFP-100 package. Features hardware cryptography, 46 communication and analog interfaces for high-performance embedded designs. Available worldwide with broad ecosystem support.

QFN-24

STMicroelectronics VNH5019A-E is a full H-bridge motor driver IC rated at 30 A continuous output current and up to 41 V supply voltage with built-in overcurrent, thermal, and undervoltage protection in a 30-pin PowerSO package. Designed for bidirectional DC motor control in automotive and industrial applications. Available in stock with worldwide shipping.

LM134D is a three-terminal adjustable current source IC by STMicroelectronics, capable of sourcing 1 µA to 10 mA with a supply voltage range of 1 V to 40 V. Key specs: 10 mA maximum output current, single function, 8-lead SOIC (Pb-free) package. From competitive pricing, in stock with worldwide shipping.

MULTIWATT-15

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz /213 DMIPS, up to 128 KB Flash, 32 KB SRAM, rich analog, math accelerator

Mainstream Arm Cortex-M4 MCU 170 MHz with 64 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration

Operating range from VCC = 1.8 to 6 V ■ Rail-to-rail input and output ■ Extended Vicm (VCC- - 0.2 V to VCC+ + 0.2 V) ■ Low supply current (400 µA) ■ Gain bandwidth product (1.6 MHz) ■ High unity gain stability ■ ESD tolerance (2 kV) ■ Latch-up immunity ■ Available in – SOT23-5 micropackage – MiniSO-8, SO-8, SO-14 – TSSOP8, TSSOP14 package

Operational Amplifiers - Op Amps 1.8V input/output Lo Pwr operation

1.8 V input/output, rail-to-rail, low power operational amplifiers

LQFP-100

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 64 Kbytes of Flash memory, 72 MHz CPU, 12-bit ADC 5 MSPS, Comparator, Op-Amp

400 mA nano-quiescent synchronous step-down converter with digital voltage selection and Power Good

Use the download button to access the L78L05CZ schematic symbol, PCB footprint, and 3D model.

MULTIWATT-11

LQFP-100

SOT-23, 5 PIN

Use the download button to access the STM32H723ZGT6 schematic symbol, PCB footprint, and 3D model.