Integrated Circuit

The STMicroelectronics L9616D is a CAN bus transceiver in an SO-8 package offering ESD protection up to 4 kV and operating from a 5 V supply. It supports data rates up to 1 Mbps and is compliant with ISO 11898 for automotive and industrial CAN networks. Available from stock worldwide with fast shipping.

Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz /213 DMIPS, up to 128 KB Flash, 32 KB SRAM, rich analog, math accelerator

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz /213 DMIPS, up to 128 KB Flash, 32 KB SRAM, rich analog, math accelerator

The STM32G0B1CBU6 from STMicroelectronics is a mainstream 32-bit Arm Cortex-M0+ microcontroller with up to 128 KB Flash and 144 KB RAM, running at up to 48 MHz with 6 USART interfaces, ADC, DAC, and DMA channels in a compact QFN package for cost-sensitive industrial and consumer embedded designs.

STMicroelectronics ST4SI2M0007AKIFW is a GSMA-compliant eSIM system-on-chip for secure M2M industrial connectivity, featuring 2 MB NVM storage in an 8-pin WFSON small-outline no-lead package with 1.27 mm pitch for automated SMT assembly.

Dual 32-bit Arm® Cortex®-M7 up to 480MHz and -M4 MCUs, up to 2MB Flash, 1MB RAM, 46 com. and analog interfaces, SMPS, DSI

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 256 Kbytes of Flash memory, 72 MHz CPU, MPU, CCM, 12-bit ADC 5 MSPS, PGA, comparators

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 128KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

• Core: ARM® Cortex®-M4 32-bit CPU with 72 MHz FPU, single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit) • Operating conditions: – VDD, VDDA voltage range: 2.0 V to 3.6 V • Memories – Up to 512 Kbytes of Flash memory – 64 Kbytes of SRAM, with HW parity check implemented on the first 32 Kbytes. – Routine booster: 16 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM) – Flexible memory controller (FSMC) for static m

The L9369-TR is an analog integrated circuit from STMicroelectronics housed in a 64-pin LQFP package, featuring a low-profile, fine-pitch square flatpack construction with plastic/epoxy body material, suited for automotive and industrial analog signal processing applications.

• Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz • -40°C to 85°C/105°C/125°C operating temperature • Memories – Up to 64 Kbytes of Flash memory with protection and securable area – 18 Kbytes of SRAM (16 Kbytes with HW parity check) • CRC calculation unit • Reset and power management – Voltage range: 1.7 V to 3.6 V – Power-on/Power-down reset (POR/PDR) – Programmable Brownout reset (BOR) – Programmable voltage detector (PVD) – Low-power modes: Sleep, Stop, Standby, Shutdown – VBAT

ESD, overvoltage and overcurrent protection with charging orientation direction detection for wearables and IoT

STMicroelectronics MP34DT05-A is an ultra-compact omnidirectional digital MEMS microphone with a -26 dBFS sensitivity, PDM output, and 3.6 V maximum supply. It operates across a 64 Hz to 10 kHz audio bandwidth with 61 dB signal-to-noise ratio in a 3.76 x 2.95 mm SMD solder-pad package. Available for voice recognition, smart speakers, and IoT audio capture applications worldwide.

Low-voltage, high-accuracy, triple/quad voltage microprocessor supervisory circuit in SOT package

Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

Use the download button to access the STL56N3LLH5 schematic symbol, PCB footprint, and 3D model.

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

32-bit Power Architecture® based MCU for automotive powertrain applications

STMicroelectronics TDA7274 is a 3-phase brushless DC motor controller IC in an 8-pin DIP package, operating from 1.8 V to 6 V supply with up to 0.7 A output current, designed for compact sensorless BLDC motor drive applications.

IC AMP D STEREO 80W POWERSSO36

LQFP-64

Mainstream Arm Cortex-M4 MCU 170 MHz with 128 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration

Includes ST state-of-the-art patented technology I²C interface • Two-wire I²C serial interface supports 1 MHz protocol • Single supply voltage: 1.8 V to 5.5 V • Multiple byte programming (up to 256 bytes) • Configurable I²C target address Contactless interface • Based on ISO/IEC 15693 • NFC Forum Type 5 tag certified by the NFC Forum • Supports all ISO/IEC 15693 modulations, coding, subcarrier modes and data rates • Custom fast read access up to 53 Kbit/s • Single and multiple blocks read (same

Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C

Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C

Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 512KB Flash, 160KB SRAM, analog, audio

Dual and quad, rail-to-rail input/output, 60 µA, 880 kHz operational amplifiers

Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C

Accordo5 - Automotive infotainment processors for display audio and cluster applications

The STSAFE-A110SO8 is a secure element IC from STMicroelectronics providing hardware-rooted authentication, cryptographic services, and secure key storage for IoT devices and peripherals in an 8-pin SO-8 package. Key security features include ECC-P256/P384 asymmetric cryptography, AES-128 symmetric encryption, 50 kB of protected non-volatile memory, and Common Criteria EAL5+ certification for robust tamper resistance. Ideal for authenticating accessories, securing firmware updates, and establishing trusted device identity in industrial IoT, smart home, and connected medical equipment applications.

Arm® Cortex®-A7 800 MHz + Cortex®-M4 MPU, TFT, 35 comm. interfaces, 25 timers, adv. analog

1 channel class D digital input automotive power amplifier with diagnostics, wide voltage operation range for car audio and telematic

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 2 Mbytes of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, Dual QSPI, TFT, MIPI-DSI, HW crypto

300mA, 28 V low-dropout voltage regulator, with 5 µA quiescent current

Mainstream Arm Cortex-M4 MCU 170 MHz with 512 Kbytes of Flash memory, Math Accelerator, HR Timer, High Analog level integration

LDO Voltage Regulators 300mA, 28 V low-dropout voltage regulator, with 5 uA quiescent current

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 2 Mbytes of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, Dual QSPI, TFT, MIPI-DSI, HW crypto

1 CH class D digital input automotive power amplifier with diagnostics, load current monitoring wide voltage operation range for car audio and telematic

Gate Drivers Quad Low Side Driver 5V

SOT-23, 5 PIN

Use the download button to access the STSPIN32F0601Q schematic symbol, PCB footprint, and 3D model.

STMicroelectronics M95M04-DWDW4TP/V is an automotive-grade 4 Mbit SPI EEPROM with up to 10 MHz clock frequency and 1 million write/erase cycle endurance. It offers 8-bit data width and 524288 addressable words. Available in SOIC-8 package with AEC-Q100 qualification for reliable automotive deployment.

38 V, 5 W synchronous iso-buck converter for isolated applications

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, AES, RNG, 1.7-3.6V

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 32 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, AES, RNG, 1.7-3.6V

QFN-32

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, AES, RNG, 1.7-3.6V

Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash,18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, AES, RNG, 1.7-3.6V