Integrated Circuit

Discrete Semiconductor Modules SIC SBD 1200 V 50 A Dual Parallel SOT-227

The Microchip MIC4427YMMTR is a dual, non-inverting high-speed MOSFET gate driver with 1.5A peak output current per channel, packaged in a compact TSSOP-8 format for low-side gate driving applications. RoHS-compliant and available in tape-and-reel, in stock with worldwide shipping.

EEPROM 4Kb I2C EEPROM, 1MHz 1.7-5.5V, 8-UDFN

Microchip ATMXT640UC4U is a 32-bit MaxTouch touchscreen controller IC with 640 sensing channels supporting large multi-touch display panels in a BGA package. Delivers low-noise capacitive sensing with on-chip firmware for gesture recognition and palm rejection. Available from authorized distributors with worldwide shipping.

Microchip UCS3205T-E/Q8A is an analog load switch IC in a compact VQFN-19 package with matte tin terminal finish, designed for controlled power sequencing and hotswap protection. Suitable for multi-rail embedded systems requiring accurate current limiting and fault protection. Available from stock with worldwide shipping.

Microchip MIC5270-5.0BM5TR is a 5.0 V low-dropout LDO regulator in SOT-23-5 package with 500 mV dropout at 100 mA and 35 µA ground current. Input voltage range spans 3.3 V to 16 V with tight load regulation of 0.1%. Available from stock with worldwide shipping.

Microchip SST89E58RDA-40-C-PIE is an 8-bit 8051-family microcontroller with 40 KB SuperFlash, running at up to 40 MHz with a 16-bit address bus, housed in a 40-pin PDIL package for embedded control applications.

The ATA8403C-6AQY66 is a UHF ASK/FSK industrial transmitter IC from Microchip in an 8-pin TSSOP package, operating from a 3 V nominal supply at up to 11 mA. It is designed for short-range wireless industrial control, remote keyless entry, and sensor telemetry transmitter modules.

ARM Microcontrollers - MCU 64QFN 105C, GREEN,1.6-3.6V,48MHz

Supervisory Circuits Active low P-P with WDI, MR-WDI=102ms, reset delay=30ms, Vtrpd-4.6V

IC MCU 32BIT 512KB FLASH 64LQFP

Microchip MICRF300YC6 is a low-noise RF amplifier operating from 100 MHz to 1 GHz with 10 dB gain and 1.8 V to 3.6 V supply, housed in a compact SOT-23-6 package with shutdown pin for power saving.

Switching Voltage Regulators One Cell Boost Regulator

Digital Signal Processors & Controllers - DSP, DSC 16 Bit DSC, Single Core, 512K Flash, 64K RAM, 100MHz, 48Pin, CAN T/R

Digital Signal Processors & Controllers - DSP, DSC 16 Bit DSC, Single Core, 512K Flash, 64K RAM, 100MHz, 48Pin, CAN, E-temp

The ATtiny3224/3226/3227 microcontrollers of the tinyAVR® 2 family are using the AVR® CPU with hardware multiplier, running at up to 20 MHz, with 32 KB Flash, 3 KB of SRAM, and 256B of EEPROM available in a 14-, 20-, and 24-pin package. The family uses the latest technologies from Microchip with a flexible and low-power architecture, including an Event System, advanced digital peripherals, and accurate analog features such as a 12-bit differential ADC with Programmable Gain Amplifier (PGA).

EEPROM 512K, 64K X 8, HI-SPEED SER EE, IND, SOT-23

I/O Controller Interface IC Embedded controller 480 KB Total SRAM

32-bit Microcontrollers - MCU PIC32MK, 256K Flash, Motor Control Features, CAN-FD, 48 Pin TQFP

Microchip MCP1701A-5002I/TO is a fixed 5 V, 250 mA low-dropout linear regulator in a TO-92-3 package, featuring a typical dropout voltage of 0.38 V and an input range of 6 V to 10 V, suitable for simple 5 V power rails in embedded systems.

8-bit Microcontrollers - MCU 32KB, TQFP48, 85C, 24MHz, 12b ADC, Comp, Opamp, MVIO, ZCD, DAC, UART, SPI, TWI

Interface - I/O Expanders 2-Wire Serial I/O Expander & Fan Controller

Varactor Diodes Si TVAR Non Hermetic Microstrip

32-bit Microcontrollers - MCU PIC32MK, 256K Flash, Motor Control Features, CAN-FD, 48 Pin TQFP

RF MOSFET Transistors FG, MOSFET, 1000V, TO-247, ROHS

Microchip UPS360E3/TR13 is a single silicon rectifier diode rated at 60 V breakdown voltage and 0.76 V maximum forward voltage in a compact SMD package. It delivers high efficiency for power conversion applications. Available in tape-and-reel packaging with worldwide shipping.

LDO Voltage Regulators 500mA Peak 1% Low Noise LDO

The MIC5317-1.8YM5 from Microchip is a 1.8 V fixed-output low-dropout linear voltage regulator delivering up to 150 mA output current in a compact SOT-23-5 package. With a 0.38 V maximum dropout voltage and 2.5 V to 6 V input range, it suits portable battery-powered digital systems.

Bipolar Transistors - BJT Power BJT

8Kb I2C EEPROM, 1MHz 1.7-5.5V, 8-SOIC

Digital Signal Processors & Controllers - DSP, DSC 16 Bit DSC, 64KB Flash, 8KB RAM, 100MHz, 28Pin, 3 OpAmp, 3 Comp, PTG, CAN-FD

Use the download button to access the 24CS512-E/SN schematic symbol, PCB footprint, and 3D model.

IC MCU 8/16BIT 64KB FLSH 100CBGA

512-Kbit, 3.4 MHz I2C Serial EEPROM with 128-Bit Serial Number and Enhanced Software Write Protection, -40°C ~ 125°C

TSSOP-20

The MIC5308YMT is a positive adjustable linear voltage regulator from Microchip delivering up to 150 mA output with an ultra-low 150 mV maximum dropout voltage and an adjustable output range of 0.8 V to 2 V. It operates over -40°C to 125°C in a 6-pin TMLF 1.6x1.6 mm package. Available from stock worldwide with fast shipping.

EEPROM 512K 3.4MHz I2C SERIAL EEPROM, E-Temp, ECC, SOIJ

USB Interface IC USB3.1 GEN1 HUB WITH OUT PD, 1CC, 6-PORT

16-bit Microcontrollers - MCU 16-bit, 16 MIPS, 64KB ECC Flash, 8KB RAM, LCD, XLP, E-Temp, 36-pin

32 KB Flash 2048 RAM FS-USB 2.0 12-bit ADC

The MCP47FEB28T-E/MQ is an octal-channel 12-bit DAC with integrated EEPROM and I2C interface in a QFN-20 package. It delivers 8 independent outputs with 0.146% maximum linearity error via a 2-wire serial bus. Ideal for multi-channel analog control, calibration, and programmable bias applications in industrial and embedded systems.

Microchip MIC61300YMLTR is a high-current 3A LDO linear regulator with a maximum dropout voltage of 0.35 V, operating from -40°C to +125°C in a compact 10-pin MLF (QFN) package, ideal for low-noise single-supply power rails in embedded systems.

The MCP251863T-H/9PX is a standalone low-power CAN FD controller from Microchip with SPI interface, supporting up to 0.625 MBps data transfer rate and a 40 MHz SPI clock in a 28-pin VQFN package. Features a low-power mode for energy-efficient automotive and industrial network nodes. RoHS-compliant with e3 moisture sensitivity rating.

The Microchip MCP73831-4ADI/OT is a single-cell lithium-ion and lithium-polymer battery charger IC in a miniature SOT-23-5 package. It delivers a programmable charge current up to 500 mA with an adjustable termination threshold and a 4.2 V regulation voltage. RoHS-compliant and available in stock with worldwide shipping.

Microchip ENC424J600IPT is a standalone 10/100 Mbps Ethernet controller with an integrated MAC and PHY layer, supporting SPI and parallel interface connections to host microcontrollers. Key specs include 24 KB on-chip receive and transmit buffer and IEEE 802.3 compliance in a 44-pin TQFP package. Available from authorized distributors with worldwide shipping.

16-bit Microcontrollers - MCU 16-bit, 16 MIPS, 64KB ECC Flash, 8KB RAM, USB, XLP, 28-pin, E-temp

Current & Power Monitors & Regulators Triple High-Side Current Sensor, I2C/SMBus, 2 Alerts, 32V

Use the download button to access the ATTINY824-XF schematic symbol, PCB footprint, and 3D model.

Low Quiescent Current: - 170 µA (maximum)/amplifier • Low Input Offset Voltage: - ±1.6 mV (maximum) • Enhanced EMI Protection: - Electromagnetic Interference Rejection Ratio (EMIRR) at 1.8 GHz: 90 dB • Supply Voltage Range: 1.8V to 5.5V • Gain Bandwidth Product: 3 MHz (typical) • Rail-to-Rail Input/Output • Unity Gain Stable • No Phase Reversal • Quick Start-up Time: 6 µs (typical) • Small Packages • Extended Temperature Range: -40°C to +125°C • AEC Q100 Qualified, Grade 1

Digital to Analog Converters - DAC Qctal Channel, 12-Bi t, MTP, SPI DAC