Integrated Circuit

24-Output PWM LED Drivers for Message Boards

Analog Devices LTC6957IDD-1#TRPBF is a dual-output low phase noise clock buffer with LVPECL outputs and differential input conditioning. Housed in a 12-pin small outline no-lead package, it delivers precise clock distribution with minimal jitter. Available in stock worldwide for time-sensitive procurement.

Voltage References Shunt Voltage Reference in WLP package

The LT3061IMS8E#PBF is a 45V input, micropower, low noise 100mA LDO linear regulator from Analog Devices. It features an ultra-low 0.25V typical dropout voltage and adjustable output with output discharge capability. Available in MSOP-8 package with low quiescent current for battery-powered designs.

Analog Devices MAXM15065AMB+ is a complete Himalaya uSLIC step-down power module integrating a switching regulator, inductor, and passives in a 3 x 2.6 x 1.5 mm package. It accepts 4.5 V to 60 V input and delivers 300 mA output with PWM/PFM control modes. Available from authorized distributors with worldwide shipping.

Analog Devices LTC4307IMS8-1#PBF is a low-offset I2C bus buffer in an 8-pin MSOP package that isolates capacitive loads and extends I2C bus reach. Supports under-voltage lockout protection with 50 mA sink current capacity. Available RoHS-compliant for industrial and consumer I2C system designs worldwide.

400mV to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown

Switching Voltage Regulators 0.9V to 5V, 500mA Input Current Limit Ultra Low Power Boost Converter with True Shutdown

Supervisory Circuits Low-Power, Single/Dual-Voltage P Reset Circuits with Capacitor-Adjustable Reset Timeout Delay

1.5A, Low Noise, Fast Transient Response LDO Regulators

Analog Devices LTC4367CMS8#TRPBF is a single-channel overvoltage, undervoltage, and reverse supply protection controller rated to 100 V with an adjustable 32 ms power-on delay in an 8-pin MSOP package. It controls an external N-channel MOSFET to protect downstream circuitry from hazardous input conditions. Available globally with worldwide shipping.

Operational Amplifiers - Op Amps Single-Supply Rail-Rail

Analog Devices LT1085CT-12 is a 3A low dropout positive fixed voltage regulator outputting 12V, with a maximum dropout voltage of 1.5V and input voltage range of 13.5V to 25V. It features line regulation of 0.025% and is housed in a TO-220 package for easy heatsinking, making it ideal for regulated power supply designs. Available in stock worldwide with fast shipping.

MAXIM INTEGRATED PRODUCTS - MAX860ESA+T - DC/DC Charge Pump Adjustable Voltage Regulator, 1.5V to 5.5V in, -5.5V to -1.5V/100mA out, NSOIC-8

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 1MB Flash, 128 KB SRAM, USB OTG FS, LCD, ext. SMPS

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces, SMPS and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces, SMPS and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces, SMPS and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces, SMPS and large set of peripherals

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

STMicroelectronics STM32F205RGY6V is a high-performance 32-bit ARM Cortex-M3 microcontroller with 1 MB Flash, 120 MHz CPU, and ART Accelerator for zero-wait-state Flash execution. It offers 51 I/O lines, ADC, DMA, and PWM channels in a compact BGA package. Available from authorized distributors with worldwide shipping for embedded control and IoT applications.

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces, SMPS and large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 128KBytes of Flash memory, 1MB RAM, 480 MHz CPU, L1 cache, external memory interface, JPEG codec, HW crypto, large set of peripherals

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1,5 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM, AES

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1,5 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

STMicroelectronics STM32F205RGY6W is a high-performance 32-bit ARM Cortex-M3 microcontroller running at up to 120 MHz with 1 MB Flash and 128 KB SRAM, featuring ART Accelerator for zero-wait-state Flash execution. Offers 51 GPIO, ADC, DMA, PWM, and multiple communication interfaces in a compact WLCSP package. Available from authorized distributors with worldwide shipping.

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

ARM® Cortex®-M4 STM32F4 Microcontroller IC 32-Bit Single-Core 100MHz 1.5MB (1.5M x 8) FLASH 100-LQFP (14x14)

STMicroelectronics STM32F423VHH3 is a 32-bit ARM Cortex-M4 microcontroller running at up to 100 MHz with 1.5 MB Flash, 320 KB SRAM, and hardware floating-point unit, housed in a 100-pin UFBGA (7×7 mm) package. It integrates ADC, DAC, DMA, and advanced peripherals for embedded control and signal processing. Available in stock worldwide with fast shipping.

STMicroelectronics STM32L152RCT6ATR is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with 256 KB Flash, 32 KB SRAM, 8 KB EEPROM, and integrated LCD controller, USB, ADC, and DAC running up to 24 MHz. Designed for battery-operated applications with 51 GPIO pins in a 64-pin LQFP package. Available from $5 in stock with worldwide shipping.

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1,5 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM, AES

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1,5 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 2 Mbytes of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1,5 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1,5 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM,

STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, Arm Cortex-M4 MCU with 1 Mbyte of Flash memory, 100 MHz CPU, Art Accelerator, DFSDM

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 1 Mbyte of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT

• Dynamic Efficiency Line with eBAM (enhanced Batch Acquisition Mode) – 1.7 V to 3.6 V power supply – -40 °C to 85/105/125 °C temperature range • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1.5 Mbytes of Flash memory – 320 Kbytes of SRAM – Flexible external static m

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 2 Mbytes of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT, HW crypto

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 2 Mbytes of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT, HW crypto

STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, Arm Cortex-M4 MCU with 512 Kbytes of Flash memory, 100 MHz CPU, Art Accelerator, DFSDM

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 2 Mbytes of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 512 Kbytes of Flash memory, 180 MHz CPU, ART Accelerateur, Chrom-ART Accelerator, FMC with SDRAM, TFT