Integrated Circuit

NNCD8.2D-A is a Renesas single-channel ESD protection diode. Key specs include 8.2 V nominal breakdown, 85 W peak dissipation, and a 2-pin Super MiniMold package. Request inquiry pricing and worldwide shipping.

NNCD7.5D-A is a Renesas single-channel ESD protection diode. Key specs include 7.5 V nominal breakdown and a compact 2-pin Super MiniMold surface-mount package. Request inquiry pricing, stock checks, and worldwide shipping.

NNCD6.2D-A is a Renesas Electronics integrated circuit for production electronic assemblies. Key specs include 6.55 V, 5.84 V, and Small Outline Diode. From RFQ pricing, check stock for worldwide shipping.

NNCD5.6D-A is a Renesas Electronics integrated circuit component for OEM assemblies, repairs, and production sourcing. Key specs include Small package, 2 pins, 2-Pin. Available through RFQ pricing, in-stock sourcing, and worldwide shipping support.

NNCD3.3D-A is a Renesas Electronics integrated circuit for production electronic assemblies. Key specs include 3.5 V, 3.1 V, and Small Outline Diode. From RFQ pricing, check stock for worldwide shipping.

NNCD11D-A is a silicon transient voltage suppressor diode for ESD clamp protection. It has 11V nominal breakdown, 200mW dissipation, 30kV ESD capability, and SC-76 2-pin packaging. From quoted pricing with worldwide shipping.

14 X 20 MM, 0.65 MM PITCH, PLASTIC, QFP-100

M30290FCHP#U3 is a Renesas 16-bit M16C/29 microcontroller. Key specs include 20 MHz operation, 128 KB plus 4 KB Flash, and 80-pin LQFP. From RFQ pricing, in-stock sourcing and worldwide shipping are available.

Renesas HD6417615ARFV is a 32-bit embedded processor IC in a plastic LQFP package. It supports 31.25 MHz clocking, 25-bit addressing, 32-bit external data bus, and DMA. From quote-based obsolete inventory with worldwide shipping support.

CR25RM-12D#B00 is a single power thyristor by Renesas Electronics. Key specs: 30 mA gate trigger, 1.5 V trigger voltage, and isolated 3-pin TO-3PFM package. From quoted pricing, in stock with worldwide shipping.

2SJ529L-E is a Renesas Electronics integrated circuit component for OEM assemblies, repairs, and production sourcing. Key specs include Transistor Outline, Vertical package, 4 pins, -60V. Available through RFQ pricing, in-stock sourcing, and worldwide shipping support.

TOP259EN is a Power Integrations intelligent offline power switch. Key specs include a 238 W rating, integrated load-switch function, and a 6-terminal ESIP-7C package. Request inquiry pricing, stock checks, and worldwide shipping.

TOP258PN is a Power Integrations intelligent offline power switch. Key specs include a 77 W rating, integrated load-switch function, and a 7-pin PDIP package. Request inquiry pricing, stock checks, and worldwide shipping.

TOP258EN is a Power Integrations intelligent offline power switch. Key specs include a 195 W rating, integrated load-switch function, and a 6-terminal ESIP-7C package. Request inquiry pricing, stock checks, and worldwide shipping.

Power Integrations TOP256PN Intelligent Power Switch, Off Line Switcher, 63W, 7-Pin, PDIP

Power Integrations TOP253EN Intelligent Power Switch, Off Line Switcher, 43W, 6-Pin, ESIP-7C

Power Integrations TOP252EN Intelligent Power Switch, Off Line Switcher, 21W, 6-Pin, ESIP-7C

Power Integrations TNY279PN Intelligent Power Switch, Off Line Switcher, 32W, 7-Pin, PDIP

TNY277PN is a Power Integrations single-channel load-switch IC. Key physical details include a 7-terminal plastic dual-in-line package for through-hole assembly. Request inquiry pricing, stock checks, and worldwide shipping.

TNY277GN is a Power Integrations integrated circuit for production electronic assemblies. Key specs include 23.5W, 8-pin, and Other. From RFQ pricing, check stock for worldwide shipping.

Power Integrations TNY276GN Intelligent Power Switch, Off Line Switcher, 19W, 7-Pin, SMD

NJM2670E3 is a New Japan Radio full-bridge motor driver IC for brushed motor control. It is supplied in a 24-pin EMP package for SMT assembly. From inquiry pricing with in-stock sourcing and worldwide shipping.

New Japan Radio NJM3771E3 is a dual stepper motor driver IC for motion-control boards. It integrates two driver channels in a 24-pin EMP small-outline package. From $0.00 in stock worldwide shipping.

Power Integrations LNK364GN is an offline switcher IC for low-power AC/DC supplies. It supports 85 to 265 V AC input, PWM control, and 0.4 A switching. From $1 in stock worldwide shipping.

NJM2761V is a single-function audio limiter IC by New Japan Radio. Key specs: 2.7 V to 13 V supply range, 14-pin SSOP package, and surface-mount construction. From quoted pricing, available through inquiry with worldwide shipping.

New Japan Radio NJM2670D2 is a full-bridge motor driver IC. It provides integrated H-bridge control in a 22-pin PDIP package for brushed DC and stepper-drive circuits. From $0.00 in stock worldwide shipping.

LTC4359IMS8#PBF is a Linear Technology input-fault protection controller. Key specs include one channel, 4 V to 80 V operation, and an 8-pin MSOP package. Request inquiry pricing, stock checks, and worldwide shipping.

Linear Technology LT1161CSW#PBF, Quad MOSFET Power Driver,, 8 to 48 V, Non-Inverting, 20-Pin SOIC

SSCSNBN005NDAA5 is a Honeywell differential pressure sensor for board-level measurement. Key specs include differential sensing and a compact 4-pin SIP package. Request quote pricing, stock checks, and worldwide shipping.

Pressure Sensor ±1PSI (±6.89kPa) Differential Male - 0.08" (1.93mm) Tube, Dual 12 b 8-DIP (0.524", 13.30mm), Dual Ports, Same Side

SSCDANN005PGAA5, Gauge Pressure Sensor 30psi 5psi 4.75 → 5.25 V dc 8-Pin DIP

ABPMJJT015PGAA5 is a Honeywell differential pressure sensor. Key specs include a 15 psi measurement range, 6 terminals, and surface-mount construction. Request inquiry pricing, stock checks, and worldwide shipping.

Pressure Sensor 30PSI (206.84kPa) Vented Gauge Male - 0.08" (1.93mm) Tube 12 b 6-SMD Module

ABPMAND001PG2A3 is a Honeywell vented-gauge pressure sensor. Key specs include a 1 psi range, 1.93 mm male tube port, and 6-terminal SMD module. Request inquiry pricing and worldwide shipping.

ABPDRRT005PG2A5 is a Honeywell vented-gauge pressure sensor module. Key specs include 5 psi range, 0.06 inch male tube, and 6-pin DIP package. Request quote pricing, stock checks, and worldwide shipping.

ABPDANN005PG2A3 is a Honeywell differential pressure sensor. Key specs include a 5 psi pressure range and 6-pin DIP package for board integration. Request quote pricing, stock checks, and worldwide shipping.

The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by

These Renesas RS-485/RS-422 devices are BiCMOS 3. 3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Renesas family is specified for 10% tolerance supplies (3V to 3. 6V). The ISL83483 and ISL83488 use slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications. Data rates up to 10Mbps are achievable by

The ISL8487E, ISL81487L, and ISL81487E RS-485/RS-422 devices are ESD protected, fractional unit load (UL), BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes without latch-up. Unlike competitive devices, this device family is specified for 10% tolerance supplies (4. 5V to 5. 5V). All devices present a 1/8 unit load to the RS-485 bus, which allows up to 256 transceivers on

The ISL81334 and ISL41334 are two-port interface ICs in which each port can be independently configured as a single RS-485, RS-422 transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. With both ports set to the same mode, two RS-485, RS-422 transceivers, or four RS-232 transceivers are available. If either port is in RS-232 mode, the onboard charge pump generates RS-232 compliant ±5V Tx output levels from a single VCC supply as low as 4.5V. Four small 0.1µF capacitors are required for the charge pump.

The ISL60002 FGA voltage references are very high precision analog voltage references fabricated using the Renesas proprietary Floating Gate Analog (FGA) technology and feature low supply voltage operation at ultra-low 350nA operating current. Additionally, the ISL60002 family features guaranteed initial accuracy as low as ±1. 0mV and 20ppm/°C temperature coefficient. The initial accuracy and temperature stability performance of the ISL60002 family, plus the low supply voltage and 350nA power consumption, e

The ISL60002 FGA voltage references are very high precision analog voltage references fabricated using the Renesas proprietary Floating Gate Analog (FGA) technology and feature low supply voltage operation at ultra-low 350nA operating current. Additionally, the ISL60002 family features guaranteed initial accuracy as low as ±1. 0mV and 20ppm/°C temperature coefficient. The initial accuracy and temperature stability performance of the ISL60002 family, plus the low supply voltage and 350nA power consumption, e

The ISL55110 is a dual high-speed MOSFET driver intended for applications requiring accurate pulse generation and buffering. Target applications include ultrasound, CCD imaging, piezoelectric distance sensing, and clock generation circuits. With a wide output voltage range and low ON-resistance, these devices can drive a variety of resistive and capacitive loads with fast rise and fall times, allowing high-speed operation with low skew, as required in large CCD array imaging applications. The ISL55110 is co

RENESAS - ISL3280EFHZ-T7A - Receiver, RS422 / RS485, 3 V to 5.5 V, SOT-23-5

The ISL29102 is a low cost, light-to-voltage silicon optical sensor combining a photodiode array, a nonlinear current amplifier, and a micro-power op amp on a single monolithic IC. Similar to human eyes, the photodiode array has peak sensitivity at 550nm and spans from 400nm to 600nm, rejecting UV light and IR light. The input luminance range is from 0.3 lux to 10,000 lux. The integrated nonlinear current amplifier boosts and converts the photodiode signal in a square root fashion, extending the light input

ISL29101IROZ-T7A is a Intersil integrated circuit component for OEM assemblies, repairs, and production sourcing. Key specs include Small package, 6 pins, 7A. Available through RFQ pricing, in-stock sourcing, and worldwide shipping support.

The ISL28633 is a 5V zero-drift rail-to-rail input/output (RRIO) Programmable Gain Instrumentation Amplifier (PGIA). This instrumentation amplifier features low offset, low noise, low gain error, and high CMRR. It is ideal for high precision applications over the wide industrial temperature range. This in-amp is designed with a unique 2-bit, 3-state logic interface that allows up to 9 selectable gain settings. The ISL2863x differential output amplifier includes a reference pin to set the common-mode output

The ISL28535 is a 5V zero-drift rail-to-rail input/output (RRIO) Programmable Gain Instrumentation Amplifiers (PGIA). This instrumentation amplifier features low offset, low noise, low gain error, and high CMRR. It is ideal for high precision applications over the wide industrial temperature range. This in-amp is designed with a unique 2-bit, 3-state logic interface that allows up to 9 selectable gain settings. The ISL2853x single-ended output amplifier includes an additional uncommitted zero-drift amplifie

The ISL28533 5V zero-drift rail-to-rail input/output (RRIO) Programmable Gain Instrumentation Amplifiers (PGIA). This instrumentation amplifier features low offset, low noise, low gain error, and high CMRR. It is ideal for high precision applications over the wide industrial temperature range. This in-amp is designed with a unique 2-bit, 3-state logic interface that allows up to 9 selectable gain settings. The ISL2853x single-ended output amplifier includes an additional uncommitted zero-drift amplifier, us

The ISL28130, ISL28230 and ISL28430 are single, dual and quad micropower, low offset drift operational amplifiers that are optimized for single and dual supply operation from 1. 8V to 5. 5V and ±0. 9V to ±2. 75V. Their low supply current of 20µA and rail-to-rail input/output enable the ISL28130, ISL28230, and ISL28430 to be an excellent general-purpose op amp for a range of applications. The ISL28130, ISL28230 and ISL28430 are ideal for handheld devices that operate off 2AA or single Li-ion batteries. The I