Integrated Circuit

Use the download button to access the NCS36000DRG schematic symbol, PCB footprint, and 3D model.

Wide Bandwidth of 1.1 MHz; Output Current to 1.0 A; Slew Rate of 1.3 V/s; Internal Thermal Shutdown ; Single or Split Supply Operation; Excellent Gain and Phase Margins ; Common Mode Input Includes Ground; Zero Deadband Crossover Distortion

Obsolete - Operational Amplifier with sub-one volt operation, shutdown pin, Rail to Rail I/O

Use the download button to access the NCS2564DTBR2G schematic symbol, PCB footprint, and 3D model.

NCS333SN2T1G ON Semiconductor, Low Power, Op Amp, RRIO, 350kHz, 1.8 → 5.5 V, 5-Pin SOT-23

Linear Voltage Regulator, 1 A, High PSRR

Pin compatible to the most popular existing industry standard dual MOSFET drivers; Input voltage from 4.5V to 20V; Both outputs can be paralleled for higher drive current; High current drive capability (+/- 5 A); TTL/CMOS compatible inputs, independent of supply voltage; Enable function incorporated for each driver

Internal 8 MHz 2-Pole Reconstruction Filter; Internal Fixed Gain: 6 dB ; Intergrated Level Shifter; Very Low Shutdown Current (< 5uA, 1.5uA Typical); Capability to drive 2 video loads; ESD HBM Protection > 4 kV at the output; Supply voltage Range: 2.7 V to 3.3 V; Sag Correction Circuit; Low Quiscent Current 6 mA typical

Use the download button to access the NCS36000DG schematic symbol, PCB footprint, and 3D model.

Differential Output; 1.0 W into an 8 Speaker; 1.5 W into a 4 Speaker; Single Supply Operation: 2.7 V to 5.5 V; THD+N: 0.2% @ 1 W Output; Low Quiescent Current: 20 mA Max; Shutdown Current < 1.0 A; Excellent Power Supply Rejection; Two Package Options: SOIC-8 Package and DFN8; Pin Compatible with Competitive Devices; Notebook Computing

TSOP−5

Use the download button to access the NCP803SN263T1G schematic symbol, PCB footprint, and 3D model.

Low Input Offset Voltage: 0.5mV, Typ; Input Common-Mode Range includes Ground.; Low Quiescent Current: 300uA per op amp at Vcc=5V.; Wide Power Supply Range: 3V to 32V

Use the download button to access the NCP803SN308T1G schematic symbol, PCB footprint, and 3D model.

Linear Voltage Regulator, 1 A, High PSRR

TO-220, 3 PIN

Operating Input Voltage: 2.0V to 5.5V; Ultra-Low Output Noise: Typ. 11uVrms; Ultra-Low No-Load Ground Current of Typ. 10uVrms; Adaptive Ground Current Feature; Available Fixed Output Voltage Options: 0.8V to 3.5V; Enable/Shutdown Pin Function; Ultra-Low Shutdown Mode Current: Max. 1uA; Active Output Discharge; Ouput Short Circuit and Current Limit Protection; Thermal Shutdown Protection; Power-Good Output Flag; 2% Output Voltage Accuracy over load/line and temperature conditions

LDO Regulator, 500 mA, Ultra-Low Iq, High PSRR, Ultra-Low Noise

Operating Input Voltage Range; Available in Fixed Voltage Options; Ultra-Low Quiescent Current; Ultra-Low Noise; Very Low Dropout; ±2% Accuracy Over Load/Line/Temperature; High PSRR; Internal Soft-Start; Thermal Shutdown and Current Limit Protections; Stable with a 1 uF Ceramic Output Capacitor; Active Output Discharge for Fast Turn-Off; These are Pb-Free Devices; Adjustable operation from 0.8V

Operating Input Voltage: 2.0V to 5.5V; Ultra-Low Output Noise: Typ. 11uVrms; Ultra-Low No-Load Ground Current of Typ. 10uVrms; Adaptive Ground Current Feature; Available Fixed Output Voltage Options: 0.8V to 3.5V; Enable/Shutdown Pin Function; Ultra-Low Shutdown Mode Current: Max. 1uA; Active Output Discharge; Ouput Short Circuit and Current Limit Protection; Thermal Shutdown Protection; Power-Good Output Flag; 2% Output Voltage Accuracy over load/line and temperature conditions

Operating Input Voltage Range; Available in Fixed Voltage Options; Ultra-Low Quiescent Current; Ultra-Low Noise; Very Low Dropout; ±2% Accuracy Over Load/Line/Temperature; High PSRR; Internal Soft-Start; Thermal Shutdown and Current Limit Protections; Stable with a 1 uF Ceramic Output Capacitor; Active Output Discharge for Fast Turn-Off; These are Pb-Free Devices; Adjustable operation from 0.8V

Operating Input Voltage Range: 2.0V to 5.5V; Ultra-Low Output Noise: Typ. 13 uVrms from 100Hz to 100kHz; Ultra-Low No-Load Ground Current of Typ. 12 uA; Adaptive Ground Current Feature; Available Fixed Output Voltage Options: 0.8V to 3.5V; Output voltage trimming step: 2.5mV; Enable/Shutdown Pin Function; Active Output Discharge; Ouput Short Circuit and Current Limit Protection; Thermal Shutdown Protection

Obsolete - LDO Regulator, 300 mA, Low Dropout, Ultra-Low Iq, Ultra-Low Noise

Enable Control (Active High, Supports Sub 1-Volt Logic); Very Low Ground Current of 40 uA Typical; Low Dropout Voltage of 340 mV at 150 mA and 3.0 V Vout; Output Voltage Accuracy of 2.0%; Operating Temperature Range of -40C to +85C; Stable with 1 uF Ceramic or Tantalum Capacitors

Operating Input Voltage Range: 2.0V to 5.5V; Ultra-Low Output Noise: Typ. 11µVrms from 100Hz to 100kHz; Ultra-Low No-Load Ground Current of Typ. 10µA; Adaptive Ground Current Feature; High Ripple Rejection Ratio: Typ. 70dB @ 1kHz; Stable with small 1µF ceramic output capacitor; Guaranteed Min. Output Current: 200mA; Available Fixed Output Voltage Options: 0.8V to 3.5V; Output voltage trimming step: 2.5mV; Enable/Shutdown Pin Function; Ultra-Low Shutdown Mode Current: Max. 1µA; Active Output Discharge; Ouput

• Operating Input Voltage Range: 2.0 V to 5.5 V • Available in Fixed Voltage Options: 0.8 to 3.5 V Contact Factory for Other Voltage Options • Output Voltage Trimming Step: 2.5 mV • Ultra−Low Quiescent Current of Typ. 10 A • Ultra−Low Noise: 11 VRMS from 100 Hz to 100 kHz • Very Low Dropout: 140 mV Typical at 200 mA • ±2% Accuracy Over Full Load/Line/Temperature • High PSRR: 68 dB at 1 kHz

Enable Control (Active High, Supports Sub 1-Volt Logic); Very Low Ground Current of 40 uA Typical; Low Dropout Voltage of 340 mV at 150 mA and 3.0 V Vout; Output Voltage Accuracy of 2.0%; Operating Temperature Range of -40C to +85C; Stable with 1 uF Ceramic or Tantalum Capacitors

Output Voltage Options: Adjustable, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V - Contact Factory for Other Voltage Options; Current Limit Protection; Thermal Shutdown Protection; Typical Noise Voltage of 15 Vrms without a Bypass Capacitor; Input Voltage down to 1.5V ; Guaranteed 1 A Output Current; 2% Output Voltage Tolerance over All Operating Conditions (fixed output options); Typical Dropout Voltage of 190 mV at 1 A (Vout = 2.5 V, TJ = 25C); Active Low Enable Pin (NCP691 device) Active High Enable Pin (NCP692 dev

Operating Input Voltage: 2.5V to 5.5V; Output Voltage Options: 1.8V, 2.8V, 3.0V, 3.3V; High Ripple Rejection Ratio: Typ. 82dB @ 1kHz; Ultra-Low Output Noise: Typ. 10µV from 10Hz to 100kHz; Stable with output capacitors as low as 1uF ; Low Sleep Mode Current: Max. 1µA; Active Discharge; Current Limit Protection; Thermal Shutdown Protection; These are Pb-Free Devices; Output Current Limit: Min. 200mA; No-Load Ground Current of Typ. 70µA ; Full-Load Ground Current of Typ. 75µA ; Output voltage accuracy: ±2.5%

LEAD FREE, SC-82AB, SC-70, 4 PIN

Enable Control (Active High, Supports Sub 1-Volt Logic); Very Low Ground Current of 40 uA Typical; Low Dropout Voltage of 340 mV at 150 mA and 3.0 V Vout; Output Voltage Accuracy of 2.0%; Operating Temperature Range of -40C to +85C; Stable with 1 uF Ceramic or Tantalum Capacitors

Enable Control (Active High, Supports Sub 1-Volt Logic); Very Low Ground Current of 40 uA Typical; Low Dropout Voltage of 340 mV at 150 mA and 3.0 V Vout; Output Voltage Accuracy of 2.0%; Operating Temperature Range of -40C to +85C; Stable with 1 uF Ceramic or Tantalum Capacitors

Guaranteed Output Current from 0mA to 1.5A; Excellent Transient Response; 0.5% Typical Output Voltage Accuracy; Operating Input Voltage from 0.8V to 5.5V; Output Voltage Adjustable from 0.8V to 3.6V; Output Current in Excess of 1.5 A; 60 mV typical dropout at the full 1.5 A load.; Stable with Any Type of Output Capacitor; Fast Transient Response; Programmable Soft-Start; Open Drain Power Good Output; Ultra-Low Dropout of Typ. 60mV

Ultra Low Quiescent Current of 2.5 uA Typical; Low Output Voltage Option down to 1.5V with +/-2% output voltage accuracy; Temperature Range of -40C to 125C; Integrated protections Current Limit Thermal Shutdown; Enable pin

0.8V to 3.6V Output Voltage Range; 0.8V to 5.5V Input Voltage Range; 120mV Typ. Dropout @ 3A; 25uVrms of Output Noise; Very Fast Transient Response; Output Current in Excess of 3.0 A; 120 mV typical dropout at the full 3.0 A load.; Fast Transient Response; Programmable Soft-Start; Open Drain Power Good Output; Stable with Any Type of Output Capacitor

LEAD FREE, SC-82AB, SC-70, 4 PIN

Adjustable Output by External Resistors from 5.0 V down to 1.250 V; Low Dropout Voltage; 3.0% Output Voltage Tolerance; Enhanced ESD range (HBM 3.5 kV, MM 400 V); Fast Enable Turn-on Time of 15 us; Excellent Line and Load Regulation; Typical Noise Voltage of 50 uVrms without a Bypass Capacitor; Camcorders

Adjustable Output by External Resistors from 5.0 V down to 1.250 V; Low Dropout Voltage; 3.0% Output Voltage Tolerance; Enhanced ESD range (HBM 3.5 kV, MM 400 V); Fast Enable Turn-on Time of 15 us; Excellent Line and Load Regulation; Typical Noise Voltage of 50 uVrms without a Bypass Capacitor; Camcorders

Use the download button to access the NCP603SN500T1G schematic symbol, PCB footprint, and 3D model.

Adjustable Output by External Resistors from 5.0 V down to 1.250 V; Low Dropout Voltage; 3.0% Output Voltage Tolerance; Enhanced ESD range (HBM 3.5 kV, MM 400 V); Fast Enable Turn-on Time of 15 us; Excellent Line and Load Regulation; Typical Noise Voltage of 50 uVrms without a Bypass Capacitor; Camcorders

LEAD FREE, SOT-89, 5 PIN

LEAD FREE, SOT-23, 5 PIN

WDFN8 2x2, 0.5P-8

ON Semiconductor NCP691MN25T2G, LDO Regulator, 1A, 2.5 V, ±2% 6-Pin, DFN

Output Current in Excess of 3.0 A; 115mV typical dropout at the full 3.0 A load; Fast Transient Response; Programmable Soft-Start; Open Drain Power Good Output; Stable with Any Type of Output Capacitor

ON Semiconductor NCP691MN18T2G, LDO Voltage Regulator, 1A, 1.8 V ±2%, 1.5 → 6 Vin, 6-Pin DFN