Integrated Circuit

SN65LVDS32D, LVDS Receiver Quad 100Mbit/s, 3 → 3.6 V, 16-Pin, SOIC

SN65LVDS31PW, LVDS Transmitter Quad LVTTL 400Mbit/s, 3 → 3.6 V, 16-Pin, TSSOP

SN65LVDS31D, LVDS Transmitter Quad LVTTL 400Mbit/s, 3 → 3.6 V, 16-Pin, SOIC

2-Gbps LVDS, LVPECL & CML to LVDS buffer, repeater & translator

SN65LVDS048APW, LVDS Receiver Quad 400Mbit/s, 3 → 3.6 V, 16-Pin, TSSOP

Line Transmitter/Receiver 1TR 1TX 1RX SN65LBC179P, Line Transceiver, ISO 8482 10Mbit/s Differential, 5 V, 8-Pin PDIP

Use the download button to access the SN65LBC176P schematic symbol, PCB footprint, and 3D model.

Quadruple Low-Power Differential Line Driver

Use the download button to access the SN65HVD251P schematic symbol, PCB footprint, and 3D model.

SN65HVD22P, Line Transceiver, EIA/TIA-485-A, RS-485 Differential, 5 V, 8-Pin PDIP

SN65HVD21P, Line Transceiver, EIA/TIA-485-A, RS-485 5Mbit/s Differential, 5 V, 8-Pin PDIP

RS485 transceiver,SN65HVD20D SO8 25Mbps

70-V Fault-Protected RS-485 Transceivers Full-Duplex with -20 to +25 common mode

30-V Fault-Protected RS-485 with -20 to +25 common mode

70-V Fault-Protected RS-485 with -20 to +25 common mode

SN65HVD1785P, Line Transceiver, EIA/TIA-485, RS-485, RS-422 Differential, 5 V, 8-Pin PDIP

30-V Fault-Protected RS-485 Transceiver

SN65HVD08P, Line Transceiver, EIA/TIA-485, ISO-8482-E, RS-485 10Mbit/s Differential, 3.3 V, 5 V, 8-Pin PDIP

High-Output RS-485 Transceiver

Dual Universal Serial Bus Port Transient Suppressor

The OPA343NA/250 is a single-channel, single-supply, rail-to-rail CMOS operational amplifier from Texas Instruments MicroAmplifier series. It features ultra-low bias current of 60 pA, 1 MHz gain-bandwidth product, and operates from 2.5 V to 5.5 V supply. Available in SOT-23-5 package with worldwide stock and fast shipping.

TO-99, 8 PIN

SN65176BP, Line Transceiver Differential, 5 V, 8-Pin PDIP

Octal transceiver,SN54LS245J CERDIP20

Dual monostable multivibrator,SN54LS123J

Voltage mode PWMcontrol,SG3524N 5V 25pcs

REGULATING PULSE WIDTH MODULATORS

Use the download button to access the SA556N schematic symbol, PCB footprint, and 3D model.

The SA555P is a precision single timer IC from Texas Instruments in an 8-pin PDIP package, operating from a 4.5V to 16V supply and delivering up to 200mA output current for astable and monostable timing, oscillator, and pulse-width modulation applications in industrial and consumer electronics.

REG710NA-5/250 is a 30-mA switched-capacitor DC-DC converter from Texas Instruments with a fixed 5-V output, 2.7-V to 5.5-V input range, and SOT-23 package. From $0.58 in stock worldwide shipping.

REG113NA-5/250 is a Texas Instruments 400 mA low-noise, low-dropout LDO linear regulator with a fixed 5 V output, 250 mV typical dropout voltage, and 5.4 V to 10 V input range, housed in a 5-pin SOT-23 package for space-efficient designs.

REG113NA-3.3/250 is a fixed 3.3V LDO linear regulator from Texas Instruments delivering 400mA output with 250mV typical dropout voltage and 3.7V to 10V input range. Available in a compact SOT-23-5 package, it is well-suited for portable battery-powered devices and mixed-signal board 3.3V rail regulation.

1A,1.8V,LDO Voltage Reg.,REG1117A-1.8 Texas Instruments REG1117A-1.8, LDO Voltage Regulator, 1A, 1.8 V ±1%, 3.8 → 15 Vin, 4-Pin SOT-223

REG102NA-5/250 is a 250 mA low-noise, low-dropout linear voltage regulator fixed at 5 V output by Texas Instruments. Key specs: 150 mV typical dropout, 10 V max input, SOT-23-5 package. Available from stock with worldwide shipping.

2.5V 4ppm/Degrees C, 100uA SOT23-6 Series (Bandgap) Voltage Reference

2.048V 50ppm/Degrees C, 50uA in SOT23-3 Series (Bandgap) Voltage Reference

The REF200AU is a dual matched precision current source/sink from Texas Instruments in an 8-pin SOIC package, delivering two independent 100 µA current outputs. It operates from a 2.5V to 40V supply for precision analog signal conditioning and sensor excitation circuits.

The REF102BP is a precision 10V three-terminal voltage reference from Texas Instruments with an output range of 9.995V to 10.005V and input voltage support from 11.4V to 36V. It offers excellent long-term stability and low temperature coefficient, making it ideal for high-accuracy measurement and calibration systems. Packaged in an 8-pin DIP for easy prototyping and industrial use.

Use the download button to access the REF1004I-2.5 schematic symbol, PCB footprint, and 3D model.

Texas Instruments REF1004I-1.2 is a micropower two-terminal shunt voltage reference with a precise 1.2 V nominal output. Ultra-low quiescent current and tight 0.5% initial accuracy suit battery-powered and precision analog designs. Available from stock worldwide with fast shipping.

Wide Supply Range, 5-V Output Precision Voltage Reference

RCV420KP is a precision instrumentation amplifier from Texas Instruments, featuring 70dB CMRR, 0.15MHz bandwidth, and 1000µV max offset voltage. Ideal for industrial signal conditioning and sensor interfaces. From $8.71, in stock with worldwide shipping.

RC4558P, Dual Operational Amplifier 3MHz, 8-Pin PDIP

QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS

3-A, Wide-Input, Adjustable Switching Regulator Module

The PLL1705 is a dual PLL frequency synthesizer clock generator from Texas Instruments in a 20-pin SSOP package, designed for professional audio and digital system clock generation. It generates multiple synchronized clock outputs from a reference frequency using two independent PLLs. Available in stock with worldwide shipping.

MULTI-CLOCK GENERATOR, PLL1700E Texas Instruments PLL1700E, Dual PLL Frequency Synthesizer, 8.192 → 36.864 MHz, 20-Pin SSOP

Stereo audio amplifier,PGA2310PA DIP16

Instrumentation Amplifiers Programmable Gain Instrumentation Amp

PGA204BU, Instrumentation Amplifier, 80dB CMRR, 16-Pin SOIC