Integrated Circuit

Voltage Regulators - Switching Regulators Regulated Negative Charge Pump

XC7Z020-1CLG484C from XILINX is a integrated Circuit. Key specs include 16 Weeks, Combinatorial Delay of a CLB-Max: 1.27 ns, 484 pins. From inquiry pricing, buyers can request stock with worldwide shipping.

Board Mount Temperature Sensors 2-Wire Digital Temp Snsr & Thrml Wtchdog

Board Mount Temperature Sensors 2-Wire Digital Temp Snsr & Thrml Wtchdog

LINEAR TECHNOLOGY - LT6015HS5#TRMPBF - Operational Amplifier, Single, 1 Amplifier, 3.3 MHz, 0.8 V/µs, 3V to 50V, TSOT-23, 5 Pins

MAXIM INTEGRATED PRODUCTS - MAX31855KASA+T - TEMPERATURE SENSOR, 2DEG C, NSOIC-8

Specialized Dual Addressable Switch 6-TDFN (3x3)

max4635etb+ is a Maxim Integrated integrated circuit for PCB-level interconnects, replacement sourcing, or production BOMs. Key specs include 10 pins, -40°C to 85°C operating range, Small Outline Packages. From inquiry pricing, in stock sourcing, and.

MAX31855KASA+, 14 bit Temperature Sensor ±2 °C SPI 3 → 3.6 V 8-Pin SOIC

Microcontrollers

MCU,8051,48MIPS,64KB Flash,USB,LQFP32

Microcontrollers

8-Bit HCS08 Microcontroller

Linear Technology LT1762EMS8-3.3#PBF, LDO Voltage Regulator, 150mA, 3.3 V, 1.8 → 20 Vin, 8-Pin MSOP

Microcontrollers

Microcontrollers

Microcontrollers

8-bit Microcontrollers - MCU 128K FLASH

Microcontroller

Microcontrollers (MCU) 8 BIT 64K FLASH

Microcontrollers (MCU)

S08QE 8-bit MCU, S08 core, 32KB Flash, 50MHz, QFP 32

Microcontroller

Microcontroller 8-bit Microcontrollers - MCU S08 CPU, 64K FLASH 80LQFP

Use the download button to access the nRF24L01P-T schematic symbol, PCB footprint, and 3D model.

Microcontroller

2-Phase Step-UP DC/DC Controller

RCLAMP1654P from SEMTECH is a integrated Circuit. Key specs include 7 pins. From inquiry pricing, buyers can request stock with worldwide shipping. Suitable for production sourcing and approved vendor list reviews.

TSYS02D from TE Connectivity is a integrated Circuit. Key specs include Operating Current-Max: 0.018 mA, 9 pins, -40°C to 125°C. From inquiry pricing, buyers can request stock with worldwide shipping.

LTC4121-4.2 from Linear Technology is a integrated Circuit. Key specs include 17 pins. From inquiry pricing, buyers can request stock with worldwide shipping. Suitable for production sourcing and approved vendor list reviews.

QFN-48

TLE9879QXA40XUMA1 from Infineon is a integrated Circuit. Key specs include 53 Weeks, 1 Day, Clock Frequency-Max: 25 MHz, 49 pins. From inquiry pricing, buyers can request stock with worldwide shipping.

S-35392A-I8T1 from Seiko Semiconductors is a integrated Circuit. Key specs include 8 pins. From inquiry pricing, buyers can request stock with worldwide shipping. Suitable for production sourcing and approved vendor list reviews.

SX1211I084TRT from SEMTECH is a integrated Circuit. Key specs include 16 Weeks, 32 pins, -40°C to 85°C. From inquiry pricing, buyers can request stock with worldwide shipping.

FTDI Chip FT231XS-R, Interface RS232, RS422, RS485, SIE, UART 3MBd, 5 V, 20-pin, SSOP

IC SOC 2.4GHZ 256K FLASH 48QFN

SOIC-8

Single Chip 2.4GHz Transceiver

The HIP4086 and HIP4086A (referred to as the HIP4086/A) are 3-phase N-channel MOSFET drivers. Both parts are specifically targeted for PWM motor control. These drivers have flexible input protocol for driving every possible switch combination. The user can even override the shoot-through protection for switched reluctance applications. The HIP4086/A have a wide range of programmable dead times (0. 5μs to 4. 5μs) which makes them very suitable for the low frequencies (up to 100kHz) typically used for motor d

High Frequency Full Bridge FET Driver

The HIP1020 applies a linear voltage ramp to the gates of any combination of 3. 3V, 5V, and 12V MOSFETs. The internal charge pump doubles a 12V bias or triples a 5V bias to deliver the high-side drive capability required when using more cost-effective N-Channel MOSFETs. The 5V/ms ramp rate is controlled internally and is the proper value to turn on most devices within the Device-Bay-specified di/dt limit. If a slower rate is required, the internally-determined ramp rate can be over ridden using an optional

The HIP4086 and HIP4086A (referred to as the HIP4086/A) are 3-phase N-channel MOSFET drivers. Both parts are specifically targeted for PWM motor control. These drivers have flexible input protocol for driving every possible switch combination. The user can even override the shoot-through protection for switched reluctance applications. The HIP4086/A have a wide range of programmable dead times (0. 5μs to 4. 5μs) which makes them very suitable for the low frequencies (up to 100kHz) typically used for motor d

The HIP4081A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4081A can drive every possible switch combination except those which would cause a shoot-through condition. The HIP4081A can switch at frequencies up to 1MHz and is well suited to driving Voice Coil Motors, high-frequency switching power amplifiers, and power supplies. For example, the HIP4081A can drive medium voltage brush motors, and two HIP4081As can be used to

The HIP2101 is a high frequency, 100V Half Bridge N-Channel power MOSFET driver IC. It is equivalent to the HIP2100 with the added advantage of full TTL/CMOS compatible logic input pins. The low-side and high-side gate drivers are independently controlled and matched to 13ns. This gives users total control over dead time for specific power circuit topologies. Undervoltage protection on both the low-side and high-side supplies force the outputs low. An on-chip diode eliminates the discrete diode required wit

The HIP4081A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4081A can drive every possible switch combination except those which would cause a shoot-through condition. The HIP4081A can switch at frequencies up to 1MHz and is well suited to driving Voice Coil Motors, high-frequency switching power amplifiers, and power supplies. For example, the HIP4081A can drive medium voltage brush motors, and two HIP4081As can be used to

The HIP4081A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4081A can drive every possible switch combination except those which would cause a shoot-through condition. The HIP4081A can switch at frequencies up to 1MHz and is well suited to driving Voice Coil Motors, high-frequency switching power amplifiers, and power supplies. For example, the HIP4081A can drive medium voltage brush motors, and two HIP4081As can be used to

The HIP4080A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4080A includes an input comparator, used to facilitate the hysteresis and PWM modes of operation. Its HEN (high enable) lead can force current to freewheel in the bottom two external power MOSFETs, maintaining the upper power MOSFETs off. Since it can switch at frequencies up to 1MHz, the HIP4080A is well suited for driving Voice Coil Motors, switching power amplif

The HIP4080A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4080A includes an input comparator, used to facilitate the hysteresis and PWM modes of operation. Its HEN (high enable) lead can force current to freewheel in the bottom two external power MOSFETs, maintaining the upper power MOSFETs off. Since it can switch at frequencies up to 1MHz, the HIP4080A is well suited for driving Voice Coil Motors, switching power amplif

The 308 is a versatile serially programmable, quad PLL clock source. The 308 can generate any frequency from 250 kHz to 200 MHz, and up to 6 different output frequencies simultaneously. The outputs can be reprogrammed on the fly, and will lock to a new frequency in 10 ms or less. Smooth transitions (in which the clock duty cycle remains roughly 50%) are guaranteed if the output divider is not changed. The device includes a PDTS pin which tri-states the output clocks and powers down the entire chip. The 308

TC4S11F from Toshiba is a integrated Circuit. Key specs include Load Capacitance (CL): 50 pF, 5 pins, -40°C to 85°C. From inquiry pricing, buyers can request stock with worldwide shipping.