Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
ECA1JHG220 Power-Rail Filter Design and Validation
Validate a 22 µF, 63 V ECA1JHG220 power-rail filter with droop calculations, startup measurements, ripple checks, and thermal tests.
Nov 11, 2026
SEP0640Q38CB Thyristor Protection Selection Guide
Choose a protection network around SEP0640Q38CB by verifying voltage limits, surge behavior, recovery, loading, and footprint.
Nov 11, 2026
ATF22V10CQ-15JU SPLD Selection and Procurement Guide
Compare ATF22V10CQ-15JU logic fit, package, timing, programming, and sourcing against four programmable-logic candidates.
Nov 10, 2026
How to Choose TL1431CL5T: Shunt Reference Selection and Procurement Guide
Choose TL1431CL5T by comparing reference accuracy, package compatibility, qualification evidence, and procurement terms.
Nov 10, 2026
All Integrated Circuit Components
Showing 73,001–73,050 of 77,666
400M-1700MHz Dual Down Converter Mixer with Integrated IF Amp & RF Baluns
TPS65266RHBT is a triple synchronous buck converter from Texas Instruments providing 3 A, 2 A, and 2 A outputs from a 2.7 V to 6.5 V input in a 32-pad QFN package. It uses current-mode PWM control for fast transient response across three independent output rails. Available from stock worldwide.
ARM® Cortex®-A8 Microprocessor IC Sitara™ 1 Core, 32-Bit 1.0GHz 324-NFBGA (15x15) 1.8V -40°C ~ 105°C (TJ)
Microprocessors - MPU Sitara ARM Cortex-A8 MPU
AM3358BZCZ100 is a Sitara ARM Cortex-A8 32-bit microprocessor running up to 1GHz by Texas Instruments. Key specs: 1GHz ARM Cortex-A8 core, 512KB L2 cache, ZCZ package (BGA-324). From $8.74, in stock with worldwide shipping.
Use the download button to access the TPS62742DSSR schematic symbol, PCB footprint, and 3D model.
TPS62737RGYT is a high-efficiency DC-DC step-down converter from Texas Instruments. It supports 2V to 5.5V input, pulse frequency modulation control, and adjustable output from 1.3V to 5V. From $2.00, in stock with worldwide shipping.
Automotive Catalog Split-Rail Converter with Dual Positive and Negative Outputs (300mA typ)
Use the download button to access the TPS65131RGET schematic symbol, PCB footprint, and 3D model.
Use the download button to access the SN74LVC1G07DSFR schematic symbol, PCB footprint, and 3D model.
4A/4A Single Channel High-speed Low-side Gate Driver with 5V Negative Input Voltage Handling Ability
4A/4A Single Channel High-speed Low-side Gate Driver with 5V Negative Input Voltage Handling Ability
UCC27517AQDBVRQ1 is a 4A single-channel high-speed low-side gate driver IC with differential Schmitt trigger input and 5V negative input voltage handling. It features fast propagation delay and strong sink/source capability, ideal for automotive MOSFET/IGBT driving in DC-DC converters, motor drives, and power management systems. Available from $0.72 in SOT-23-5 package with worldwide shipping.
4A/4A Single Channel High-speed Low-side Gate Driver
UCC27517DBVT is a 4A/4A single-channel high-speed low-side MOSFET gate driver with Schmitt trigger input. Features 5ns propagation delay, wide 4.5V–18V supply range, and robust 4A peak drive current. From $0.45 in stock, worldwide shipping available in SOT-23-5 package.
Texas Instruments HPA00444AIDBVR is a 10-bit SPI digital temperature sensor with ±2.5°C maximum accuracy in a SOT-23-6 package. Body measures 2.9mm x 1.6mm for space-constrained designs. Available from stock worldwide with fast shipping.
Use the download button to access the TMP125AIDBVR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TPS61085TPWR schematic symbol, PCB footprint, and 3D model.
Conv DC-DC Single-OUT Step Up TPS61085PW, Boost Converter, Step Up 2A Adjustable, 2.8 ââ€â€™ 18.5 V, 1200 kHz, 8-Pin TSSOP
AMC6821SQDBQRQ1 is a 2-channel fan speed controller IC by Texas Instruments with SMBus interface and automatic fan speed control. Supports PWM output, temperature monitoring, and fault detection for thermal management. From $2.64, in stock with worldwide shipping.
Use the download button to access the AMC6821SDBQR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the CC2530F256RHAR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the CC2530F64RHAT schematic symbol, PCB footprint, and 3D model.
Texas Instruments CC2533F32RHAT is a System-on-Chip IC integrating an IEEE 802.15.4 compliant RF transceiver with an 8051 MCU core, 32KB flash, and 8KB RAM, designed for remote controls and ZigBee RF4CE applications. Operates from 2V to 3.6V supply in a compact 40-pin QFN package. From $4.74, in stock worldwide shipping.
16-Bit, Parallel Input Multiplying DAC
TEXAS INSTRUMENTS - DAC8820IBDBR - IC, 16/14-BIT BUS DAC
TEXAS INSTRUMENTS - DAC8820ICDBG4 . - Digital to Analogue Converter, 16 bit, 2 MSPS, Parallel, 2.7V to 5.5V, SSOP, 28 Pins
Use the download button to access the DAC8820ICDB schematic symbol, PCB footprint, and 3D model.
250 MHz, 2.4V CMOS operational amplifier with shutdown. Features 73 MHz bandwidth, 56 dB CMRR, and ultra-low 0.05 nA bias current for precision signal conditioning. From $1.07, in stock, worldwide shipping.
Use the download button to access the PGA112AIDGSR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the PGA112AIDGST schematic symbol, PCB footprint, and 3D model.
Texas Instruments,PGA113AIDGST,IC,Amp Texas Instruments PGA113AIDGST, Programmable Gain Amplifier, Rail to Rail Output, 10-Pin VSSOP
The DS100MB201SQE/NOPB is a dual-lane 2:1/1:2 multiplexer and buffer with integrated equalization for high-speed serial data paths, housed in a 54-pin QFN package. It features complementary outputs and supports multiple signal routing configurations. Available from stock with worldwide shipping.
Dual 2.5 Gbps 2:1/1:2 CML Mux/Buffer with Transmit Pre-Emphasis and Receive Equalization
Dual 4.0 Gbps 2:1/1:2 CML Mux/Buffer with Transmit Pre-Emphasis and Receive Equalization
25 MHz MCU with Integrated USB Phy, 64KB Flash, 4KB RAM, 12Bit/14 Channel ADC, 32BIT HW Multiplier
Dual 4.25 Gbps 2:1/1:2 CML Mux/Buffer w/ Tx Pre-Emphasis & Rx Equalization
Dual 1.5 Gbps 2:1/1:2 LVDS Mux/Buffer with Pre-Emphasis
Dual 800 Mbps 2:1/1:2 LVDS Mux/Buffer
The DS42MB100TSQ/NOPB is a 4.25Gbps 2:1/1:2 CML multiplexer and buffer from Texas Instruments with integrated transmit pre-emphasis and receive equalization for high-speed serial signal conditioning. It features 2 inputs and 1 output in a 36-pin QFN package, enabling signal routing in backplane and networking applications. Available in stock worldwide with competitive pricing and lead-free RoHS-compliant packaging.
Precision Voltage-to-Current Converter/Transmitter
XTR111AIDGQT is a precision voltage-to-current converter IC by Texas Instruments, featuring 1-channel operation in a 10-pin HTSSOP EP package with high accuracy and low offset. Ideal for industrial 4-20mA current loop transmitters and process control systems. From $0.97 in stock with worldwide shipping.
Wireless Charging ICs Wireless Pwr Receivr
250-mA Single Cell Li-Ion Battery Charger, 1mA termination, 75nA Battery leakage
Triple-Supply Power Management FPGA, DSP Texas Instruments, TPS75003RHLT Step-Down Switching Regulator 3A Adjustable
LM5122MHE/NOPB is a 3–65V wide input, current-mode synchronous boost controller with multiphase capability. Supports PWM control, up to 100V output, 12V nominal input. From $1.54, in stock with worldwide shipping.
LM5122MH/NOPB is a current-mode PWM boost controller from Texas Instruments, supporting 3V–65V input, up to 100V output, in a 20-pin SOIC package. From $1.42 in stock, worldwide shipping.
Use the download button to access the LM5118Q1MH/NOPB schematic symbol, PCB footprint, and 3D model.
DC-DC Controller StepUp/Down 75V TSSOP20 LM5118MH/NOPB, DC-DC Controller, 75 V, 500 kHz, 20-Pin, TSSOP EP
DRV8880PWPR is a 2A stepper motor driver IC with 1/16 microstepping indexer, smart tuning auto-torque and auto-decay technology, and STEP/DIR control interface. Features 2.5A peak output current, integrated protection circuits, and 28-pin TSSOP package. From $1.80 in stock with worldwide shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote