Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
ECA1JHG220 Power-Rail Filter Design and Validation
Validate a 22 µF, 63 V ECA1JHG220 power-rail filter with droop calculations, startup measurements, ripple checks, and thermal tests.
Nov 11, 2026
SEP0640Q38CB Thyristor Protection Selection Guide
Choose a protection network around SEP0640Q38CB by verifying voltage limits, surge behavior, recovery, loading, and footprint.
Nov 11, 2026
ATF22V10CQ-15JU SPLD Selection and Procurement Guide
Compare ATF22V10CQ-15JU logic fit, package, timing, programming, and sourcing against four programmable-logic candidates.
Nov 10, 2026
How to Choose TL1431CL5T: Shunt Reference Selection and Procurement Guide
Choose TL1431CL5T by comparing reference accuracy, package compatibility, qualification evidence, and procurement terms.
Nov 10, 2026
All Integrated Circuit Components
Showing 71,551–71,600 of 77,666
4-Channel I2C and SMBus Multiplexer With Interrupt Logic
Operational Amplifiers - Op Amps Quad GP Op Amp
RS-232 Interface IC Dual EIA-232 Driver/ Receiver
Use the download button to access the DAC7573IPW schematic symbol, PCB footprint, and 3D model.
24-bit, 30kSPS, 8-Ch Delta-Sigma ADC with PGA for Factory Automation and Process Control
High-Performance 2-Channel LED Driver for Automotive Lighting
The Texas Instruments TPA6205A1DGN is a Class-AB mono audio amplifier IC with -70dB THD+N and 20kHz bandwidth. It integrates a single audio channel with 1% harmonic distortion in a compact 8-pin MSOP package. Available in stock globally with worldwide shipping for portable audio design applications.
Adjustable, 800-mA, 10V Vin, 95% Efficient Step-Down Converter in MSOP-10
LMP8640HVMK-H/NOPB is an operational amplifier by Texas Instruments. Key specs include Average Bias Current-Max (IIB): 28 µA; Bias Current-Max (IIB) @25C: 21 µA. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.
42-V, Configurable Gain, Low- or High-Side, High-Speed, Voltage Output Current Sensing Amplifier
LMP8603MA/NOPB is an operational amplifier by Texas Instruments. Key specs include Average Bias Current-Max (IIB): 0.02 µA; Common-mode Reject Ratio-Min: 90 dB. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.
60V, Bi-Directional, Low-/High-Side, Voltage Output Current Sensing Amplifier
Automotive Grade, 60-V, Bidirectional, Low- or High-Side, Voltage Output Current Sensing Amplifier
Single-Channel 10-Ohm SPST Analog Switch
The MAX4595DBVR is a single-channel 10-ohm SPST analog switch IC with 300 MHz bandwidth, operating up to 5.5 V supply. It features a normally-open 1:1 SPST configuration in a compact 5-pin SOT-23 package. Available in stock worldwide with fast shipping for high-frequency signal routing applications.
Single-Channel 10-Ohm SPST Analog Switch
Texas Instruments TPS79330DBVR, LDO Voltage Regulator, 0.2A, 3 V
Use the download button to access the TCAN332DR schematic symbol, PCB footprint, and 3D model.
1-µA, 3-pin SOT-23 10-ppm/°C shunt voltage reference
3.125 Gbps 2X2 LVDS Crosspoint Switch w/ TX Pre-Emphasis and RX Equalization
Use the download button to access the ISO7640FMDW schematic symbol, PCB footprint, and 3D model.
3.3V 8-Channel 1:1 Bus Switch
Use the download button to access the SN74LVC245ARGYR schematic symbol, PCB footprint, and 3D model.
CMOS BCD-to-Decimal or Binary-to-Octal Decoders/Drivers
12-Bit, Octal, Ultralow Glitch, Voltage Output Digital to Analog Converter
Stereo Digital Audio Delay Processor With I2C Control
74LVC1G240DBVRE4 is a single-channel inverting 3-state buffer/line driver from Texas Instruments LVC logic family. Features 1.65V to 5.5V operation, 32mA output drive, and active-low output enable control. Available in compact 5-pin SOT-23 package for space-constrained designs.
The 74LVC1G240DBVTG4 is a single buffer/line driver with 3-state output from Texas Instruments LVC low-voltage CMOS family. Operating from 1.65V to 5.5V supply with 3.3ns propagation delay at 3.3V, it features 32mA output drive and 5V-tolerant inputs for seamless mixed-voltage bus interfacing in compact SOT-23-5 package.
Buffers & Line Drivers Single Buffer/Driver
Single Inverting Buffer/Driver With 3-State Outputs
Buffers & Line Drivers Single Buffer/Driver
Single Inverting Buffer/Driver With 3-State Outputs
Single Inverting Buffer/Driver With 3-State Outputs
Single Inverting Buffer/Driver With 3-State Outputs
Single inverting buffer/driver with 3-state outputs from Texas Instruments in a 5-pin SOT-23 package. Operates over -40 to 125 C with active-low output enable for clean bus isolation. In stock with worldwide shipping and 24-hour quotes.
4.5 to 60V Input 3.5A Step-Down DC-DC Converter With Soft-Start and Eco-mode™
The TPS54360DDAR from Texas Instruments is a synchronous step-down switching regulator accepting 4.5 V to 60 V input, delivering up to 3.5 A output current with current-mode PWM control and Eco-mode for high efficiency at light loads.
Conv DC-DC 4.5V to 60V Step Down Single-Out 0.8V to 58.8V 3.5A Automotive 8-Pin HSOP EP Tube
IC, HEX INVERTER, SMD
Automotive Catalog 2.5-A and 5-A, 35-VMAX VDD FET and IGBT Single-Gate Driver
Operational Amplifiers - Op Amps Single-Supply Rail-to-Rail
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
16-Channel LED Driver w/EEprom DOT Correction & Grayscale PWM Control
Enhanced Product 16 Channel LED Driver With DOT Correction and Grayscale PWM Control
TLC59116FIRHBR is a 16-channel I2C Fast-Mode Plus LED driver from Texas Instruments controlling individual LED brightness via PWM over a 1MHz I2C bus in a 32-pin QFN package. Supports daisy-chaining multiple devices on a single I2C bus for scalable LED matrix and RGB indicator panel designs in consumer and industrial applications.
12-Channel, 16-Bit ES-PWM RGB LED Driver with 3.3V Linear Regulator
Use the download button to access the TLC5926IDBQR schematic symbol, PCB footprint, and 3D model.
Texas Instruments TLC5942PWP, LED Driver 16-Segments, 3.3 V, 5 V, 28-Pin HTSSOP
LED DRVR 8Segment 3V to 5.5V 16-Pin SOIC Texas Instruments TLC5916ID, LED Driver 8-Segments, 3.3 V, 5 V, 16-Pin SOIC
Automotive 8-Bit Constant-Current LED Sink Drivers
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote