Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
ECA1JHG220 Power-Rail Filter Design and Validation
Validate a 22 µF, 63 V ECA1JHG220 power-rail filter with droop calculations, startup measurements, ripple checks, and thermal tests.
Nov 11, 2026
SEP0640Q38CB Thyristor Protection Selection Guide
Choose a protection network around SEP0640Q38CB by verifying voltage limits, surge behavior, recovery, loading, and footprint.
Nov 11, 2026
ATF22V10CQ-15JU SPLD Selection and Procurement Guide
Compare ATF22V10CQ-15JU logic fit, package, timing, programming, and sourcing against four programmable-logic candidates.
Nov 10, 2026
How to Choose TL1431CL5T: Shunt Reference Selection and Procurement Guide
Choose TL1431CL5T by comparing reference accuracy, package compatibility, qualification evidence, and procurement terms.
Nov 10, 2026
All Integrated Circuit Components
Showing 71,301–71,350 of 77,666
AUDIO OPERATIONAL AMPLIFIERS
OP Amp Single GP R-R I/O 5.5V 20-Pin Texas Instruments OPA569AIDWP Op Amp, 1.2MHz Rail-Rail, 3 V, 5 V, 20-Pin SOIC
Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current
Use the download button to access the DRV8837DSGR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the DRV8837DSGT schematic symbol, PCB footprint, and 3D model.
Low-Noise Fast-Transient-Response 1.5-A Low-Dropout Voltage Regulators
Low-Cost, 8-Channel, Integrated Analog Front-End for Metering Applications
Low-Cost, 8-Channel, Integrated Analog Front-End for Metering Applications
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset
Dual, Micropower, LinCMOS™ Voltage Comparator
80V, 50mA Operational Amplifiers
TEXAS INSTRUMENTS - OPA547F/500G3 . - OP AMP, HIGH VOLT, SMD, PFM-7, 547
Use the download button to access the TL2575HV-05IKTTR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the OPA548FKTWT schematic symbol, PCB footprint, and 3D model.
Single Output LDO, 100mA, Adj.(0.7 to 5.5V), Low Quiescent Current, Over Current Limitation
Reg LDO Lin Adj Pos 0.7V to 5.5V 0.1A Texas Instruments TPS76201DBVR, LDO Voltage Regulator, Adjustable 0.1A, 0.7 ??? 5.5 V, 5-Pin SOT-23
Dual D-Type Positive-Edge-Triggered Flip-Flops With Clear and Preset
SN74HC74PWR is a dual D-type positive-edge-triggered flip-flop IC with independent clear and preset inputs from Texas Instruments, operating up to 25 MHz in the HC logic family. Each flip-flop provides 1-bit storage with complementary Q and Q-bar outputs in a 14-pin TSSOP package. Available from stock with worldwide shipping.
TPL5000DGSR is a nano power programmable timer IC with integrated watchdog functionality from Texas Instruments. Operates at ultra-low quiescent current with adjustable timing intervals via external resistor. From $0.855, in stock worldwide shipping.
Use the download button to access the TPL5000DGST schematic symbol, PCB footprint, and 3D model.
Texas Instruments HPA00763DCKR (equivalent to TPS3801-01DCKR) is a single-channel voltage supervisor and microprocessor reset IC with adjustable threshold in a SOT-23-5 package. Provides reliable power-on reset and supply monitoring without watchdog timer, suitable for 3.3 V and 5 V systems. Available in tape-and-reel format for high-volume automated assembly.
Logic Gates Sgl 3Input Pos OR- AND Gate
Use the download button to access the SN74LVC1G0832DBVR schematic symbol, PCB footprint, and 3D model.
SN74LVC1G3208DBVR is a single 3-input positive OR-AND gate from Texas Instruments LVC logic family, featuring 1.65V to 5.5V operation, 32mA output current, and 50pF load capacitance. Available from $0.08 in SOT-23 package with worldwide shipping.
16-Bit Dual-Supply Bus Transceiver with Configurable Level-Shifting / Voltage Translation
Texas Instruments TPS65910A1RSL is a highly integrated Power Management IC (PMIC) featuring 4 DC/DC converters, 8 LDOs, and RTC, supporting 1.7V–5.5V input in a compact 6x6mm QFN-48 package. From $2.295, in stock with worldwide shipping.
3-V to 5.5-V multichannel RS-232 line driver and receiver with ±15-kV IEC ESD protection
3-V to 5.5-V multichannel RS-232 line driver and receiver with ±15-kV IEC ESD protection
Conv DC-DC 4.5V to 42V Step Down Single-Out 0.8V to 41V 3.5A Automotive 8-Pin HSOP EP Tube
36-V Low-/High-Side Bi-Directional Zero-Drift Current Sense Amp w/Precision Int Shunt Resistor
Use the download button to access the INA2332AIPWR schematic symbol, PCB footprint, and 3D model.
Low-Power, Single Supply, CMOS, Low Cost, Instumentation Amplifier
The LMT84DCK is an analog temperature sensor from Texas Instruments with a Class-AB output, ±2.7°C maximum accuracy, and ultra-low 9 µA supply current. It is housed in a compact SOT-23-5 package with short-circuit protection for robust embedded use. Available in stock with worldwide shipping.
Board Mount Temperature Sensors Automotive +/-0.5degC Temp Sensor with I2C/SMBus Interface in Industry Std LM75 Form Factor & Pinout 8-VSSOP -40 to 125
±0.5°C Temperature Sensor with I2C/SMBus Interface in Industry Std LM75 Form Factor & Pinout
TMP275AIDGKT is a 12-bit digital temperature sensor with ±0.5°C accuracy and I2C/SMBus interface, pin-compatible with LM75. Features programmable alert, shutdown mode, and MSOP-8 package. From $0.48 in stock with worldwide shipping.
The MAX232DRE4 is a dual EIA-232 line driver and receiver IC in a 16-pin SOP package, featuring Schmitt trigger inputs, external charge pump, and compliance with EIA-232-F, TIA-232-F, and V.28 standards. Available from Texas Instruments with worldwide shipping.
RS-232 Interface IC Dual EIA-232 Driver/ Receiver
PLASTIC, MS-012AB, SOIC-14
Use the download button to access the TPA6111A2DGN schematic symbol, PCB footprint, and 3D model.
Boomer Series: 3W Audio Amplifier with Shutdown Mode
3W Mono Analog Input Class-D Speaker Amp with Integrated Boost Converter
TEXAS INSTRUMENTS - LM4865M - AMP, AUDIO/VOLT CONTROL 0.75W, 4865
Octal Bus Transceiver With Adjustable Output Voltage and 3-State Outputs
SN74LVCC4245ADW is an octal bus transceiver with adjustable output voltage supporting dual power-supply rails (Port A: 4.5V–5.5V, Port B: 2.7V–5.5V), 3-state outputs, and bidirectional control. From $0.828, in stock with worldwide shipping.
Bus XCVR Single 8-CH 3-ST Texas Instruments SN74LVCC4245APWR, Bus Transceiver, 8-Bit Non-Inverting LVTTL, 2.7 → 5.5 V, 4.5 → 5.5 V
Use the download button to access the INA250A3PWR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the INA250A1PWR schematic symbol, PCB footprint, and 3D model.
Inverter Schmitt Trigger Hex CMOS 14-Pin Texas Instruments SN74AC14N, CMOS Hex Schmitt Trigger Inverter, 24mA, 2 → 6 V, 14-Pin PDIP
Triple 3 Input positive NAND gate
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote