Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
ECA1JHG220 Power-Rail Filter Design and Validation
Validate a 22 µF, 63 V ECA1JHG220 power-rail filter with droop calculations, startup measurements, ripple checks, and thermal tests.
Nov 11, 2026
SEP0640Q38CB Thyristor Protection Selection Guide
Choose a protection network around SEP0640Q38CB by verifying voltage limits, surge behavior, recovery, loading, and footprint.
Nov 11, 2026
ATF22V10CQ-15JU SPLD Selection and Procurement Guide
Compare ATF22V10CQ-15JU logic fit, package, timing, programming, and sourcing against four programmable-logic candidates.
Nov 10, 2026
How to Choose TL1431CL5T: Shunt Reference Selection and Procurement Guide
Choose TL1431CL5T by comparing reference accuracy, package compatibility, qualification evidence, and procurement terms.
Nov 10, 2026
All Integrated Circuit Components
Showing 71,101–71,150 of 77,666
DC-DC Converter Step-Dn 2.7-5.5V SOT23-5 Texas Instruments LM3671MF-3.3/NOPB, Step Down DC-DC Converter, 600mA, Adjustable, 1.1 → 3.3 V, 5-Pin SOT-23
Use the download button to access the TLV2217-33KCSE3 schematic symbol, PCB footprint, and 3D model.
TEXAS INSTRUMENTS - BQ24230RGTR - BATT CHARGER, LI-ION, 0.5A, VQFN-16
BQ24230RGTT is a USB-friendly single-cell Li-Ion linear battery charger IC with 0.5A charge current, dynamic power management, and 6.6V OVP protection. From $1.13, in stock worldwide shipping.
Low Power Open Drain Output Comparator with Voltage Reference
1.8V, 35µA, microPower, Precision, Zero Drift CMOS Op Amp
3-MHz, Low-Power, RRIO CMOS op-amp with 72 dB CMRR, 3000 µV max offset voltage, rail-to-rail I/O, ideal for cost-sensitive portable and industrial systems. From $0.329, in stock, worldwide shipping.
3A Fixed / Adjustable Output Linear Regulator
The Texas Instruments LM1085ISX-5.0/NOPB is a 3A fixed 5V output low-dropout linear voltage regulator in a 3-pin D2PAK (TO-263) package. It features a maximum dropout voltage of 1.5V and accepts inputs up to 29V, providing robust regulated power for high-current applications. Available in stock with worldwide shipping.
Dual 1MSPS 12-Bit 4x2 / 2x2 ADC VQFN32EP Texas Instruments ADS7223SRHBT, 12 bit Serial ADC, Dual Differential Input, 32-Pin VQFN
OPA2365AIDR is a dual rail-to-rail output CMOS operational amplifier with 50MHz bandwidth, 100dB CMRR, and single 1.8V–5.5V supply. Features ultra-low 10pA bias current and shutdown capability. From $0.54, in stock worldwide shipping.
OP Amp Dual GP R-R I/O 5.5V 8-Pin SOIC Texas Instruments OPA2365AID, Dual Op Amp, 50MHz CMOS, Rail to Rail, 3 V, 5 V, 8-Pin SOIC
55V/µS, High-Speed, 0.8µV/˚C Drift Max, Precision Operational Amplifier
Wideband, Voltage Feedback Operational Amplifier With Disable
Wideband, Unity Gain Stable FET-Input Operational Amplifier
2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Operational Amplifier
Automotive 2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Operational Amplifier
50MHz, Low-Distortion, High CMRR RRI/O, Single-Supply OPERATIONAL AMPLIFIER
Enhanced Product 2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Op Amp
OPERATIONAL AMPLIFIER
50MHz, Low-Distortion, High CMRR, RRI/O, Single-Supply OPERATIONAL AMPLIFIER
Use the download button to access the TUSB542RWQR schematic symbol, PCB footprint, and 3D model.
ESD Suppressors / TVS Diodes Low-Cap 2Ch ESD Protection Array
Automotive Low-Capacitance 2-Channel +/-15kV ESD Protection Array for High-Speed Data Interfaces
The TPD2E001DRSR is a 2-channel low-capacitance ESD protection diode array from Texas Instruments, rated for ±15 kV contact discharge, 11V minimum breakdown voltage, and housed in a 6-pin SOT-563 package for protecting high-speed data interface lines. In stock worldwide.
Use the download button to access the TPS2546RTER schematic symbol, PCB footprint, and 3D model.
Automotive USB Charging Port Controller and Power Switch
RFID Transponders Dynamic NFC Interface Transponder for Large File Transfer 16-VQFN -40 to 85
1-4 Series CEDV Battery Fuel (Gas) Gauge
Autoswitching Power Mux
Pwr Mux Autoswitch 2.8V to 5.5V 1A Texas Instruments TPS2111A, Power Multiplexer Autoswitching 1A 5.5 V max. 8-Pin TSSOP
Adjustable LDO Plus 3.3V Switch with Dual Current Limit for High Power USB Peripherals
TPS2115AIPWRQ1 is an automotive-grade dual-input autoswitching power mux from Texas Instruments, featuring automatic switchover between two supply rails, ideal for redundant power systems. From $1.24 in stock, worldwide shipping.
Dual In/Single Out Autoswitching Power MUX, Manual/Auto Switching, Adj. Cur Limit, Switch Status
Pwr Mux Autoswitch 1.5V to 5.5V 1.25A
LM7812SX/NOPB is a fixed 12V positive linear voltage regulator from Texas Instruments. It delivers up to 1.5A output current with 2V dropout voltage and 35V max input. Ideal for power supply circuits, automotive electronics, and industrial systems. From $0.90 in stock with worldwide shipping.
Texas Instruments LM7812S/NOPB is a fixed 12V linear voltage regulator accepting 14.5V to 30V input with 2V dropout, capable of supplying regulated 12V output for industrial and consumer electronics, available in a 3-pin surface-mount D-PAK package.
AUTOSWITCHING POWER MUX
Single JFET-input improved offset operational amplifier
Use the download button to access the SN74HC595BRWNR schematic symbol, PCB footprint, and 3D model.
TEXAS INSTRUMENTS - CD4017BM96 - COUNTER, DECADE/DIVIDER, 11MHZ, SOIC-16
Logic Gates SNGL 3 Input Pos AND Gate
Single 3-input AND gate from Texas Instruments LVC logic family, operating at 1.65V to 5.5V with 50pF load capacitance. Features low-voltage CMOS compatibility and 32mA output drive current in compact SOT-23-6 package. Available in tape and reel with worldwide shipping.
SINGLE 3-INPUT POSITIVE-AND GATE
Use the download button to access the HVDA541QDRQ1 schematic symbol, PCB footprint, and 3D model.
10-Ohm Quad SPDT Analog Switch
Texas Instruments TS3A5018PWG4 is a 10-Ω quad SPDT analog switch with 4 channels, 300 MHz bandwidth, and 1.65V–3.6V supply. Supports high off-state isolation of 48 dB for signal routing applications. From $0.41, in stock with worldwide shipping.
10-Ohm Quad SPDT Analog Switch
10-Ohm Quad SPDT Analog Switch
Analog SW Quad SPDT 3.6V 16-Pin SSOP Texas Instruments TS3A5018DBQR, Analogue SPDT Switch Quad SPDT, 3 V, 16-Pin SSOP
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote