Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
ECA1JHG220 Power-Rail Filter Design and Validation
Validate a 22 µF, 63 V ECA1JHG220 power-rail filter with droop calculations, startup measurements, ripple checks, and thermal tests.
Nov 11, 2026
SEP0640Q38CB Thyristor Protection Selection Guide
Choose a protection network around SEP0640Q38CB by verifying voltage limits, surge behavior, recovery, loading, and footprint.
Nov 11, 2026
ATF22V10CQ-15JU SPLD Selection and Procurement Guide
Compare ATF22V10CQ-15JU logic fit, package, timing, programming, and sourcing against four programmable-logic candidates.
Nov 10, 2026
How to Choose TL1431CL5T: Shunt Reference Selection and Procurement Guide
Choose TL1431CL5T by comparing reference accuracy, package compatibility, qualification evidence, and procurement terms.
Nov 10, 2026
All Integrated Circuit Components
Showing 70,751–70,800 of 77,666
LP2989IMX-5.0/NOPB is a 500 mA ultra low-dropout linear regulator with 0.31 V typical dropout and micropower quiescent current. Features fixed 5.0 V output, 16 V max input, and low noise for noise-sensitive applications. From $1.63, in stock worldwide shipping.
SN74LVC14AD is a hex Schmitt-trigger inverter IC from Texas Instruments, featuring 6 independent inverting channels with hysteresis for noise immunity, 1.65V to 5.5V operation, and 24mA output drive capability. From $0.14 in stock worldwide shipping.
SN74LVC14ADBR is a hex Schmitt-trigger inverter IC with 6 independent channels, 1.65V–5.5V supply range, and 24mA output drive. Ideal for signal conditioning and noise-immune logic conversion. From $0.06 in stock, worldwide shipping.
Use the download button to access the LM2941CT/LF03 schematic symbol, PCB footprint, and 3D model.
SIMPLE SWITCHER® 6V to 42V, 1A High Output Voltage Power Module
TEXAS INSTRUMENTS - LMZ14201HTZX/NOPB . - DC/DC CONV, BUCK, POL, 800KHZ, TO-PMOD-7
LMZ14201HTZ is a Texas Instruments Simple Switcher power module with 42V input, 1A output, and voltage-mode control. Features integrated inductor for minimal external components. From $9.60, in stock with worldwide shipping.
TEXAS INSTRUMENTS - TPS54540DDA - DC-DC CONV, BUCK, ADJ, 2.5MHZ, HSOP-8
SN65HVD11DR is a 3.3V RS-485/RS-422 differential line transceiver with 10 Mbps signaling rate, differential Schmitt trigger inputs, and half-duplex operation. From $1.77 in stock with worldwide shipping.
3.3V Differential Transceiver
ISO7240CFQDWRQ1 is an automotive-grade quad-channel digital isolator with 4/0 channel configuration and 25Mbps data rate, supporting 2.5kVrms isolation and selectable failsafe outputs. Available from $4.55 with worldwide shipping.
ISO7240CFDW is a 4-channel digital isolator from Texas Instruments in SOIC-16 package, supporting up to 150 Mbps data rate with 4 kVrms isolation. From $4.00 in stock with worldwide shipping.
GREEN, PLASTIC, SOIC-16
SOIC-16
32-bit Microcontrollers - MCU A 595-MS320F28377DZWTQ
Delfino™ 32-bit MCU with 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, EMIF, 16b ADC
The TLV314IDBVR is a single-channel, 3 MHz CMOS operational amplifier with rail-to-rail input and output, low noise, and a maximum input offset voltage of 3 mV. It features a 72 dB minimum CMRR and is housed in a 5-pin SOT-23 package. Available globally for cost-sensitive signal conditioning and sensor interface designs.
100-mA Fixed Output Linear Regulator
DUAL BUFFER/DRIVER WITH OPEN-DRAIN OUTPUTS
SINGLE BUFFER GATE
TLV27L2IDGKR is a dual operational amplifier from Texas Instruments featuring 11 µA/channel ultra-low quiescent current, 160 kHz gain-bandwidth product, and rail-to-rail output. From $0.722 in stock worldwide shipping.
Operational Amplifiers - Op Amps 11-uA/Ch 160kHz RR-Out Dual Op Amp
Use the download button to access the TLV27L2IDGK schematic symbol, PCB footprint, and 3D model.
11-uA/Channel, 160kHz, RR-Out Dual Op Amp
Automotive, 11-uA/Channel, 160kHz, RR-Out Dual Op Amp
Dual 4-Bit Binary Counters
High Efficient Single Inductor Buck-Boost Converter with 1-A Switches
LM25085AMY/NOPB is a 4.5V–42V wide-input constant on-time non-synchronous PFET buck controller with 0.9V reference and voltage-mode control. Features adjustable mode from 1.9V, 8-MSOP-PowerPAD package, and -40°C to 125°C operation. From $1.35 in stock worldwide shipping.
The TPS3618-50DGKT is a 5 V battery-backup supervisor IC for RAM retention with a 4.55 V reset threshold and integrated power-on reset generator, housed in an 8-pin SOIC package for embedded memory backup applications.
4-channel, Noise-immune, AEC-Q100 qualified, 12-bit Capacitive Sensing Solution
LDO Voltage Regulators 200mA Low Noise High-PSRR
LSSOP-5
The TPS709B33DBVT is a fixed 3.3 V, 150 mA ultra-low quiescent current LDO regulator with wide 2.7 V to 30 V input range and reverse current protection. It features 0.3 V typical / 1.4 V maximum dropout voltage and operates from a single-function 5-pin SOT-23 package. From $0.65 in stock worldwide shipping.
150-mA 30-V ultra-low-Iq wide-input low-dropout (LDO) regulator with reverse current protection
USB3.1 10Gbps Dual Channel Linear Redriver
LM4051BIM3-ADJ/NOPB is an adjustable shunt voltage reference IC from Texas Instruments, offering an output voltage range of 1.24V to 10V with ±0.2% accuracy in a compact SOT-23 package. From $1.05, in stock worldwide shipping.
Use the download button to access the PGA206UA schematic symbol, PCB footprint, and 3D model.
The CD74HC4046AM is a high-speed CMOS phase-locked loop (PLL) IC integrating a voltage-controlled oscillator and two phase comparators for frequency synthesis and clock-recovery applications, operating across a 2 V to 6 V supply range. It is housed in a 16-pin SOIC package for straightforward surface-mount assembly. Available from stock worldwide with fast shipping.
The REF102CP is a precision 10 V three-terminal voltage reference in an 8-pin DIP package. It achieves 2.5 ppm/°C maximum temperature drift, 10.0 V output accuracy within ±2.5 mV, and accepts 11.4 V to 36 V input. Available from stock worldwide with competitive pricing.
6-60V Wide Vin, current mode boost, SEPIC and Flyback controller, AEC-Q100 qualified
Low-Noise 1-A Transformer Driver for Isolated Power Supplies, Internal Clock-160kHz
Use the download button to access the SN6505BDBVR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TS3USB30EDGSR schematic symbol, PCB footprint, and 3D model.
Enhanced Product 16-Bit Dual-Supply Bus Transc., Configurable Voltage Translation, 3-State Outputs
8-Bit Universal Bus Transceiver and Two 1-Bit Bus Transceivers with 3-State Outputs
Voltage Regulators - Switching Regulators 2.5A Power Module w/ 7V-50V Input
SIMPLE SWITCHER® 7V to 50V, 2.5A Wide Vin Power Module in Small Package
One Output, Integrated VCO, Low-Jitter Clock Generator
TMS320F28377SPZPS is a Texas Instruments Delfino 32-bit DSP MCU running at up to 200 MHz with 1024 KB Flash, 16-bit ADC, FPU, and TMU for real-time control. Dual-core architecture with CLA coprocessor delivers 400 MIPS aggregate for demanding motor and power control. Available from stock with worldwide shipping.
TPS61200DRCR is a synchronous boost converter from Texas Instruments accepting an input voltage as low as 0.3 V and delivering up to 5.5 V output via 1.3 A integrated switches. It supports a unique Down Mode allowing the output to track below the input for single-cell battery designs with adjustable output voltage from 0.3 V to 5.5 V. Packaged in a compact 3x3 mm 10-pin QFN with worldwide availability.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote