Integrated Circuit

Low Noise, Low Quiescent Current, Precision Operational Amplifier e-trim/trade

Use the download button to access the LM6211MF/NOPB schematic symbol, PCB footprint, and 3D model.

Texas Instruments LM7805MPX/NOPB is a fixed 5 V positive linear voltage regulator in a 4-pin SOT-223 surface-mount package, accepting 7.5 V to 30 V input with 2 V nominal dropout, delivering a regulated 5 V rail for general-purpose embedded and consumer electronics designs.

The LM7805SX/NOPB is a fixed 5 V linear voltage regulator from Texas Instruments supporting input voltages up to 30 V and a 2 V typical dropout in a 3-pin SOT-223 package. Designed for reliable 5 V rail generation in consumer and industrial designs. Available worldwide with fast shipping.

The LM7805MP/NOPB is a fixed 5 V positive linear voltage regulator from Texas Instruments, available in SOT-223 package. It supports input voltages from 7.5 V to 30 V and delivers a regulated 5 V output with up to 1 A output current. Ideal for embedded systems, consumer electronics, and industrial power supplies requiring stable 5 V rails.

SIMPLE SWITCHER 1A Step-Down Voltage Regulator

Use the download button to access the LM2596T-5.0/NOPB schematic symbol, PCB footprint, and 3D model.

Texas Instruments CD74HC573M is a high-speed CMOS HC-family octal transparent latch with 3-state outputs and active-low output enable control. Supports 50pF load capacitance and unidirectional bus driving in a 20-pin SOIC package. In stock with worldwide shipping.

DRV8838DSGT is a half-bridge brushed DC motor controller IC from Texas Instruments, supporting up to 1.9A output current with integrated N-channel FETs. From $0.26, in stock with worldwide shipping.

Power Management IC (PMIC) with Battery Charger, 3 Step-down converters, and 2 LDOs

Use the download button to access the DLPA2005ERSLT schematic symbol, PCB footprint, and 3D model.

Power Management IC (PMIC) with Battery Charger, 3 Step-down converters, and 2 LDOs

Use the download button to access the LSF0204DPWR schematic symbol, PCB footprint, and 3D model.

8-bit shift register

Use the download button to access the TPS2412PW schematic symbol, PCB footprint, and 3D model.

Full Featured N+1 and ORing Power Rail Controller

Logic Gates Quadruple 2-Input Positive-NAND Gate

Quadruple 2-Input Positive-NAND Gates With Open-Drain Outputs

TEXAS INSTRUMENTS - TLC04CDG4 - IC, FILTER BUTTERWORTH, SMD, SOIC8

TEXAS INSTRUMENTS - TLC14CD - FILTER SWITCHED-CAP LP, SMD, SOIC8

Butterworth Switched-Capacitor Filter

TVSOP-24

Use the download button to access the SN74CBT3253PWR schematic symbol, PCB footprint, and 3D model.

4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER

1-Of-8 FET Multiplexer/Demultiplexer

Multiprotocol Modules WL18xxMOD Dual-Band Ind Mod

The LM22679TJE-5.0/NOPB is a SIMPLE SWITCHER 5A step-down voltage regulator from Texas Instruments with a 4.5V to 42V input range and fixed 5.0V output, featuring adjustable soft-start, current limiting, and PWM/PFM dual-mode control in a 7-pin power package. It provides robust protection and high efficiency across a wide industrial input voltage range. Ideal for industrial, automotive, and telecommunications power supplies requiring reliable regulation from high-voltage rails.

DIP-14

Monostable multivibrator with Schmitt-trigger inputs

SN74LVC2G07DBVRE4 is a dual single-input non-inverting open-drain buffer from Texas Instruments' LVC logic family, operating from 1.65 V to 5.5 V with 24 mA open-drain sink current per channel in a 6-pin SOT-23 package. Its open-drain outputs enable wired-OR logic and voltage level translation up to 5.5 V. Supplied in RoHS e4 lead-free tape-and-reel for automated assembly.

Buffer/Driver 2-CH Non-Inverting Open Drain CMOS 6-Pin SC-70 T/R

Buffer/Driver 2-CH Non-Inverting Open Drain CMOS 6-Pin SC-70 T/R

Enhanced Product Dual Buffer/Driver with Open-Drain Output

Dual Buffer/Driver with Open-Drain Output

5.7V, 6A, 16mΩ Load Switch With Adjustable Rise Time and Optional Quick Output Discharge

Use the download button to access the UA78M33QDCYRG4Q1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TMP303DDRLT schematic symbol, PCB footprint, and 3D model.

6 Gbps HDMI® Retimer

Switching Voltage Regulators 3V-17V 1A Automotiv Step-Down Converter

Switching Voltage Regulators 3V-17V 1A Step-Down Converter

Use the download button to access the TPS54302DDCT schematic symbol, PCB footprint, and 3D model.

150mA 3.8V Low-Noise ULDO Reg. SOT23-5 Texas Instruments LP2985IM5-3.8/NOPB, Low Noise LDO Voltage Regulator, 350mA, 3.8 V 1%, 2.2 → 16 Vin, 5-Pin

16-Bit, Single Channel, Parallel Interface with Internal Reference

Automotive Catalog 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver w/+/-15-kV ESD Protection

The MUX36D04IPW is a 4:1 differential analog multiplexer from Texas Instruments with 500 MHz bandwidth and up to 85 V input voltage range, housed in a 16-pin TSSOP package. It supports dual supplies up to ±18 V and is designed for high-voltage precision signal routing. Available from global distributors with worldwide shipping.

TLV3501AIDR is a 4.5ns rail-to-rail high-speed comparator with push-pull output, 6.5mV max offset voltage, and single-supply operation. Ideal for pulse detection, zero-crossing, and fast threshold applications. From $2.00 in stock, worldwide shipping.

Automotive Catalog 4.5ns Rail-to-Rail, High Speed Comparator in Microsized Packages

The TLV3501AIDBVR is a 4.5 ns rail-to-rail high-speed comparator with push-pull output in a 6-pin SOT-23 package. Features 10 nA maximum input bias current and 6.5 mV maximum input offset voltage for precise threshold detection. Available from stock with worldwide shipping.

16-Bit 2.5-V to 3.3-V/3.3-V To 5-V Level Shifting Transceiver With 3-State Outputs

OPERATIONAL AMPLIFIER