Integrated Circuit

Low Supply Voltage Range: 1.8 V to 3.6 V • Universal Serial Interface (USI) Supporting SPI • Ultra-Low Power Consumption and I2C – Active Mode: 220 µA at 1 MHz, 2.2 V • 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample- – Standby Mode: 0.5 µA and-Hold, and Autoscan (MSP430G2x52 Only) – Off Mode (RAM Retention): 0.1 µA • On-Chip Comparator for Analog • Five Power-Saving Modes • Brownout Detector • Ultra-Fast Wake-Up From Standby Mode in • Serial Onboard Programming,

MSP430G2x55 Mixed Signal Microcontroller

• Low Supply-Voltage Range: 1.8 V to 3.6 V • 16-Bit Timer_A With Two Capture/Compare • Ultralow Power Consumption Registers – Active Mode: 220 µA at 1 MHz, 2.2 V • Brownout Detector – Standby Mode: 0.5 µA • On-Chip Comparator for Analog Signal Compare Function or Slope A/D (See Table 1) – Off Mode (RAM Retention): 0.1 µA • Serial Onboard Programming, • Five Power-Saving Modes No External Programming Voltage Needed, • Ultrafast Wake-Up From Standby Mode in Less Programmable Code Protection by Securit

The LMP91200MT/NOPB is an analog front-end signal conditioner from Texas Instruments, specifically designed for pH and electrochemical sensor interface in a TSSOP-16 package. It operates from up to 6V supply and integrates signal conditioning circuitry for direct interfacing with ion-selective electrodes (ISE). This device is suitable for water quality monitoring, chemical analysis, and industrial sensor systems requiring precision pH measurement.

The SN7474DR is a TTL dual D-type positive edge-triggered flip-flop IC with preset and clear inputs, operating at up to 15 MHz in a 14-pin SOIC package. Each of the two flip-flop elements provides true and complementary outputs with 16 mA sink current capability. Available from stock worldwide at competitive prices.

LM1117IDTX-5.0/NOPB is an 800mA fixed 5V low-dropout linear regulator from Texas Instruments. It features 1.2V typical dropout voltage, built-in current limiting, and thermal shutdown protection. From $0.73, in stock with worldwide shipping.

OPA1632DGNR is a fully differential audio operational amplifier from Texas Instruments, featuring ultra-low distortion (THD+N <0.00008%), 180 MHz gain-bandwidth product, and 45 V/µs slew rate. Ideal for high-fidelity audio ADC drivers and professional audio equipment. From $1.75 in stock with worldwide shipping.

Use the download button to access the OPA1632DR schematic symbol, PCB footprint, and 3D model.

Single 2-Input Positive-NAND Gate

COUNTER/DIVIDER, BINARY; PDIP; BINARY COUNTER/DIVIDER LOGIC; 20V; 500MW; -55

CMOS 12-Stage Ripple-Carry Binary Counter/Divider

Enhanced Product 14-Bit, 8 Msps Adc Single Ch., Diff. Input, Dsp/Up If, Pgmable Gain Amp

Use the download button to access the UCC28730DR schematic symbol, PCB footprint, and 3D model.

Constant-Voltage, Constant-Current PWM Controller with Primary-Side Regulation

AC/DC Converters Hi Pwr Flyback Cntlr w/ Primary-Side Reg

LDO Voltage Regulators Ultra Low-Power 100-mA LDO

VOLTAGE REFERENCE

TEXAS INSTRUMENTS - REF5025IDGKT - VOLTAGE REF, SERIES, 2.5V, VSSOP-8

The REF5025ID is a precision series voltage reference from Texas Instruments delivering 2.5V output with ultra-low 3 ppm/°C temperature drift and only 3 µVpp/V noise. It accepts 2.7V to 18V input and provides up to 10mA output in an 8-pin SOIC package. Available in stock with worldwide shipping for high-accuracy measurement systems.

TLV702475DBVR is a 300 mA fixed-output low-dropout (LDO) linear regulator from Texas Instruments with 4.75 V output, 2 V to 5.5 V input range, and 0.22 V typical dropout voltage. It is packaged in a 5-pin SOT-23 for space-constrained portable and battery-powered applications.

30V, 100mA Micropower Voltage Regulators with Shutdown

LP2951-33DR is a 30V, 100mA micropower LDO voltage regulator with fixed 3.3V output, featuring ultra-low 380mV dropout voltage, shutdown control, and error flag output. Ideal for battery-powered and portable devices.

Constant-Voltage, Constant-Current PWM Controller with Primary-Side Regulation

Analog Comparators AC 4.5ns R-to-R Comparator

Dual Schmitt-Trigger Buffer

Dual improved offset, standard operational amplifier<br />&nbsp;

DAC714PG4 is a 16-bit digital-to-analog converter from Texas Instruments with serial input, ±10V analog output, and ±15V supply. Features 0.0122% linearity error in a 16-DIP package. From $30.33 in stock with worldwide shipping.

SOT-23, 5 PIN

Use the download button to access the TS321IDBVRG4 schematic symbol, PCB footprint, and 3D model.

Automotive Catalog Low-Power Single Operational Amplifier

Inverters Hex Schmitt-Trigger Inverters

DAC8551AQDGKRQ1 is an automotive-grade 16-bit single-channel voltage-output DAC with ultralow glitch, SPI serial interface, and 5.5V supply support. From $3.04, in stock worldwide shipping.

2-channel, AEC-Q100 qualified, 28-bit Inductance-to-Digital Converter with I2C for Inductive Sensing

The TL16C752CIRHBR is a dual UART with 64-byte FIFOs from Texas Instruments, housed in a QFN package supporting up to 48 MHz clock and 0.375 MBps data rate. It operates from 1.8V to 5V supply and supports async serial and Ethernet-compatible communication. Available from stock worldwide with competitive pricing.

BCD TO DECIMAL DECODERS/DRIVERS

Texas Instruments SN74159NKH is a 4-to-16 line decoder and demultiplexer with open-collector outputs, compatible with TTL logic levels. It accepts 4-bit binary input to activate 1 of 16 output lines, enabling address decoding and data routing. Available in a 24-pin DIP package for through-hole designs with worldwide shipping.

50 Ohm Line Drivers

The SN7417N is a hex buffer and driver IC from Texas Instruments featuring six open-collector high-voltage outputs capable of sinking up to 40mA per channel. It belongs to the TTL family, operates at 5V, and supports 50pF load capacitance in a 14-pin DIP package. Available from stock with worldwide shipping.

Use the download button to access the SN74LS138NE4 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74LS138DR schematic symbol, PCB footprint, and 3D model.

Dual-Channel, 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC)

Quad-Channel, 16-Bit, 100-MSPS Analog-to-Digital Converter (ADC)

2.8A Brushed DC Motor Driver with Current Sense (PH/EN Ctrl)

Automotive Haptic Driver for ERM and LRA with Built-In Library and Smart Loop Architecture

Use the download button to access the SM470R1B1MHKPS schematic symbol, PCB footprint, and 3D model.

14 BIT ASYNCHRONOUS BINARY COUNTERS

2.25MHz Step-Down Converter with Dual LDOs & SVS Power Management IC (PMIC)

Delfino TMS320F28375SPZPT is a 32-bit DSP MCU with 400 MIPS performance, 1024 KB Flash, 12-bit ADC, FPU, and TMU for precise floating-point control. From $11.74, in stock with worldwide shipping.

TEXAS INSTRUMENTS - TPS61032PWPR - IC, SYNC BOOST CONV, 600KHZ, HTSSOP-16

CMOS Dual Precision Monostable Multivibrator (125 C Operation)