Integrated Circuit

Maxim MAX7404ESA+ is an 8th-order switched-capacitor elliptic lowpass filter IC in 8-SOIC package with cutoff frequency range from 0.001 kHz to 10 kHz. Available from stock with worldwide shipping.

LDO Regulator Pos 3.3V 1A 3Pin TO252 Diodes Inc ZLDO1117 ZLDO1117K33TC, Single Linear Voltage Regulator, 1A 3.3 V, 2%, 3-Pin TO-252

FT812 Embedded Video Engine, QFN56 FT812Q-T, LCD Controller 8 bit Mono Audio Format, SVGA Support SPI 1.8 → 3.3 V, 56-Pin VQFN

IC,microcontroller,8-bit,25MIPs,16Kb Flash,10 Bit ADC,USB,SPI,I2C,UART,Comp,Vref,LQFP32,C8051F320-GQ

74HC(T)366-Q100 - Hex buffer/line driver; 3-state; inverting@en-us

LDO Regulator Pos 3.3V 1A 4Pin SOT223 Diodes Inc ZLDO1117G33TA, Single Linear Voltage Regulator, 1A 3.3 V, 2%, 3-Pin SOT-223

Intel EPM3032ATC44-4N is a MAX 3000A CPLD with 32 macro cells, 30 I/O lines, and up to 227.3 MHz clock frequency in a TQFP-44 package. It supports in-system programming via JTAG and is 3.3V compatible. Available from authorized distributors with worldwide shipping.

Intel EPM3032ATI44-10N is a MAX 3000A CPLD with 32 macrocells, 30 I/O lines, and 103.1MHz maximum clock frequency in a 44-pin TQFP package with in-system programmability via JTAG. Available from stock worldwide with fast shipping.

The ICM7218 series of universal LED driver systems provide, in a single package, all the circuitry necessary to interface most common microprocessors or digital systems to an LED display. Included on-chip are an 8-byte static display memory, two types of 7-segment decoders, multiplex scan circuitry, and high current digit and segment drivers for either common cathode or common anode displays. The lCM7218A and 1CM7218B feature two control lines (WRITE and MODE) which write either 4 bits of control informatio

ROHS COMPLIANT, PLASTIC, DIP-28

The Intersil ICM7228 display driver interfaces microprocessors to an 8-digit, 7-segment, numeric LED display. Included on chip are two types of 7-segment decoder, multiplex scan circuitry, LED display segment drivers, LED display digit drivers and an 8-byte static memory as display RAM. Data can be written to the ICM7228A and ICM7228B's display RAM in sequential 8-digit update or in single-digit update format. Data is written to the ICM7228C display RAM in parallel random access format. The ICM7228A and ICM

Logic, NXP, 74LVC2G08DP 74LVC2G08DP, Logic Gate Dual 2 Input AND, 74LVC, 32mA 1.65 ??? 5.5 V 8-Pin TSSOP

Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs; LVTTL Compatible – Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Replacement for NC7WZ08; Chip Complexity: FET = 124

74LVC2G08-Q100 - Dual 2-input AND gate@en-us

TSSOP-8

Torex XC6216B332MR is a fixed 3.3 V LDO voltage regulator in a compact SOT-25 5-pin package, supporting up to 28 V input and 1.7 V maximum dropout voltage. Available from stock with worldwide shipping.

Infineon TLE4278G is an automotive-grade fixed LDO voltage regulator supporting 5.5 V to 45 V input range with a maximum 0.5 V dropout and exceptional 0.02% line regulation. Available in a 14-pin small outline package with worldwide shipping.

Dual high-voltage low-power operational amplifier optimized for wide supply range applications. Features rail-to-rail output swing and low quiescent current in a compact SOP-8 package. From $0.30 in stock worldwide shipping.

Fujitsu MB85RC04VPNF-G-JNE1 is a 4 Kbit (512 x 8) ferroelectric RAM (FRAM) with I2C interface, offering virtually unlimited write endurance and fast byte-write operation without erase cycles. Available in small outline package with worldwide shipping.

Use the download button to access the 551SDCGI8 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the 551SDCGI schematic symbol, PCB footprint, and 3D model.

Low capacitance 7-fold bidirectional ESD protection diode array in SOT363 package with 5V clamping voltage, featuring 8 elements in common anode configuration for multi-line protection. From $0.10 in stock worldwide shipping.

1SS321(F) is a Toshiba Switch for front-panel controls, mode selection, reset inputs. Key specs include 3-Pin, 3 pins and SOT-23. From $ price in stock worldwide shipping.

Nexperia PUSBM5V5X4-TL,115 is a 4-channel TVS diode array optimized for high-speed USB OTG ESD protection, featuring ultra-low capacitance and a breakdown voltage range of 6.4 V to 7.2 V in SOT1189-1 package. Available in stock with worldwide shipping.

Linear Technology LTC4002ES8-4.2#PBF is a standalone Li-Ion battery charger IC in an 8-pin SOIC package, delivering up to 1A charge current with a fixed 4.2V charge voltage. Available from stock with worldwide shipping.

RF Amplifier LNA MMIC 4GHz 2.2dB

2-input AND gate

MikroElektronika MIKROE-1296 is a 4-20mA T Click board that transmits analog sensor data as a 4mA to 20mA current loop signal over long industrial cable runs. Key specs include mikroBUS form factor, SPI interface, 12-bit DAC resolution, and 7V to 30V loop supply compatibility. Available from stock worldwide with fast shipping.

TSSOP-5

Linear Technology LTC5510IUF#PBF is a wideband double balanced RF mixer operating from 1 MHz to 6 GHz with 50Ω characteristic impedance, 15 dBm maximum CW input power, in a compact 4×4mm QFN-16 package. From $5.00 in stock worldwide shipping.

Intel EPM7128AETC100-10N is a MAX 7000AE CPLD with 128 macrocells, 84 I/O pins, 98 MHz max clock, and JTAG ISP support in a 100-pin TQFP package. Available from stock worldwide with fast shipping.

Use the download button to access the BA2904SFV-E2 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the BA2904F-E2 schematic symbol, PCB footprint, and 3D model.

Vishay TSOP75238WTR is a high-performance 38 kHz infrared receiver module with 950 nm center wavelength detection and ±75° angular acceptance. Operating from 2.5 V to 5 V supply voltage, this surface-mount receiver delivers 30-meter detection range with linear output for remote control, consumer electronics, and industrial IR sensing applications. Available in stock worldwide with fast shipping.

Maxim Integrated MAX5436EUB+ is a precision ±15V, 128-tap digital potentiometer with low drift and 3-wire serial interface. This integrated circuit features 0.4 kHz bandwidth and requires a 2.7V to 5.25V digital supply alongside analog supplies, making it ideal for audio, instrumentation, and programmable gain circuits. Available in 10-pin Mini SO package with worldwide shipping.

The Maxim Integrated MAX31855TASA+ is a precision thermocouple-to-digital converter IC delivering cold-junction compensated temperature measurement with integrated signal conditioning in an 8-pin SOIC surface-mount package. This sensor interface IC measures K-type thermocouple signals directly and outputs 12-bit temperature data via SPI serial interface, eliminating the need for external amplification and linearization circuits in industrial temperature monitoring and control applications. Available globally in stock with rapid delivery for sensor system integration.

Precision thermocouple-to-digital converter with integrated cold-junction compensation for temperature measurement systems. The MAX31855JASA+ provides digital 12-bit temperature resolution with SPI interface, supporting K-type thermocouples across -200°C to 1372°C measurement range. Packaged in 8-pin SOIC for embedded thermal sensing applications.

F862, Film, Metallized Polypropylene, Automotive Safety, 1.2 uF, 10%, 310 VAC, 310 VAC (X2), 310 VAC, 630 VDC, 110°C, -40°C, 110°C, 0.2 % , 10 GOhms, 200 V/us, 2, 9.576 g, 26mm, 22mm, 13mm, Lead Spacing = 22.5mm, 300, 104 Weeks

Nexperia HEF4047BT is a CMOS monostable/astable multivibrator IC from the 4000-series logic family, packaged in 14-pin PDSO. This versatile timing circuit provides retriggerable one-shot and free-running oscillator modes with complementary outputs, supporting supply voltages from 3 V to 15 V. Proven standard-cell logic widely available from electronics distributors with fast worldwide delivery.

Ultra-Low 0.7V Operating Supply Voltage ● Low 4.0μA Supply Current ● Precision Monitoring of 2.85V to 5.0V PowerSupply Voltages ● Reset Thresholds Available from 2.63V to 4.80V, in Approximately 100mV Increments ● Fully Specified over Temperature ● Three Power-On Reset Timeout Periods Available (1ms min, 20ms min, 100ms min) ● Low Cost ● Three Available Output Structures: Push/Pull RESET, Push/Pull RESET, Open-Drain RESET ● Guaranteed RESET/RESET Valid to VCC = 0.7V (MAX6800/MAX6801) ● Power-Su

The MAX6143AASA10+ is a precision voltage reference IC providing a stable 10 V output in a compact 8-pin SOIC package. This three-terminal reference maintains output accuracy of ±0.05% and features low temperature coefficient for use in precision data acquisition systems, battery chargers, and industrial instrumentation. Available globally in stock with fast worldwide shipping.

Linear Technology LT1057S8#PBF is a dual JFET-input precision operational amplifier in 8-pin SOIC package featuring ultra-low input bias current of 50 pA and 96 dB common-mode rejection ratio. This high-speed voltage-feedback op-amp excels in precision instrumentation, medical imaging, and photodiode transimpedance circuits requiring minimal input loading. Available globally with same-day delivery for critical analog signal conditioning and measurement systems.

Use the download button to access the CY7C68013A-56LTXC schematic symbol, PCB footprint, and 3D model.

USB 2 Controller,8051,CY7C68013A-128AXC Cypress Semiconductor CY7C68013A-128AXC, USB Controller, 480Mbit/s, USB 2.0, 3.3 V, 128-Pin TQFP

ON Semiconductor LM385BZ-1.2G is a 1.235V precision voltage reference IC in a 3-pin TO-92 package. This two-terminal shunt regulator delivers ultra-low noise output (typ. 50µV RMS) and low temperature drift for precision analog circuits. Widely stocked globally with fast shipping from authorized distributors, making it ideal for battery monitoring, precision biasing, and measurement applications.

The general purpose optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon photo-transistor in a standard plastic six-pin dual-in-line package.

ROHM - BR93L46RF-WE2 - SERIAL EEPROM, 1KBIT, 2MHZ, SOP-8

The NXP MKL04Z8VLC4 is a 32-bit ARM Cortex-M0+ microcontroller running at 32 MHz with 8 KB Flash memory and comprehensive analog peripherals including 12-bit ADC and DAC. Integrated DMA controller, multiple communication interfaces, and QFP package enable embedded IoT, sensor fusion, and low-power portable applications. In stock worldwide with competitive pricing and fast delivery.

The Intel EPM3064ALC44-10N is a high-capacity MAX 3000A CPLD featuring 64 macro cells, 34 I/O lines, and in-system programmable (ISP) architecture with JTAG support. Operating at speeds up to 100 MHz in a 44-pin plastic leaded chip carrier (LCC) package, this device delivers ample logic resources for complex digital designs. RoHS compliant and available in stock worldwide for immediate deployment.

The EPM7064AETC44-10N is an Altera MAX 7000A CPLD featuring 64 macrocells, 4 logic array blocks (LABs), and 36 I/O pins in a 44-pin TQFP package operating at 3.0 to 3.6V with 100 MHz maximum clock frequency. This EEPROM-based programmable logic device supports in-system programmable (ISP) configuration via JTAG interface for real-time field updates and rapid prototyping. Available globally with immediate stock and standard shipping for legacy system maintenance, industrial control retrofits, and embedded state-machine implementations.