Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
ATF22V10CQ-15JU SPLD Selection and Procurement Guide
Compare ATF22V10CQ-15JU logic fit, package, timing, programming, and sourcing against four programmable-logic candidates.
Nov 10, 2026
How to Choose TL1431CL5T: Shunt Reference Selection and Procurement Guide
Choose TL1431CL5T by comparing reference accuracy, package compatibility, qualification evidence, and procurement terms.
Nov 10, 2026
ATF22V10CQ-15JU Design Guide for Board Validation
Validate ATF22V10CQ-15JU boards with package checks, logic simulation, timing budgets, safe startup, and controlled programming releases.
Nov 9, 2026
TL1431CL5T Design Guide for Shunt Reference Feedback
Design TL1431CL5T feedback with current budgets, divider error analysis, startup checks, and loop stability validation.
Nov 9, 2026
All Integrated Circuit Components
Showing 66,551–66,600 of 77,666
8-bit addressable latch IC from Texas Instruments ALS logic family, featuring 1:8 demultiplexer followed by D-latch with active-high reset, 16-pin DIP package, 50pF load capacitance, ideal for data storage and bus interface applications. From $1.526 in stock worldwide shipping.
SN74AHC373N is an octal transparent D-type latch with 3-state outputs, featuring 50pF load capacitance and 8mA output current. Ideal for bus interfacing and data storage applications. From $0.66, in stock with worldwide shipping.
SYNCHRONOUS 4-BIT DECADE AND BINARY COUNTERS
Decoder/Demultiplexer 1 x 3:80°C ~ 70°C Voltage - Supply 4.5V ~ 5.5V 16-PDIP
SN74AHC00N is a quad 2-input NAND gate IC from Texas Instruments AHC logic family, operating at 2V–5.5V supply with 4 independent channels and 14-PDIP package. Ideal for high-speed logic applications. From $0.37, in stock, worldwide shipping.
The SN74ABT574AN is an octal edge-triggered D-type flip-flop with 3-state outputs from Texas Instruments ABT family. It features 3.3V/5V operation, 50pF load capacitance, and active-low output enable for high-speed bus interfacing. From $0.48, available in DIP-20 package with worldwide shipping.
SN74ACT563N is an octal D-type transparent latch with 3-state outputs, featuring ACT logic family and 50pF load capacitance. Supports unidirectional bus driving with active-low enable control. From $0.55 in stock, worldwide shipping.
SN74AC563N is an octal D-type transparent latch with 3-state outputs, featuring AC logic family, 50pF load capacitance, and enable low/high control. Available from $0.94 in DIP-20 package with worldwide shipping.
SN74AC533N is an 8-bit D-type transparent latch bus driver from Texas Instruments with 3-state outputs, 50 pF load capacitance, and DIP-20 package. From $0.83 in stock, worldwide shipping.
SN74AC373N is an octal D-type transparent latch with 3-state outputs in a 20-pin DIP package. Features 50 pF load capacitance, enable-low control, and 24 mA output sink current. Ideal for bus interfacing and data storage applications. From $0.4641 in stock with worldwide shipping.
SN74AS286N is a 9-bit parity generator/checker with bus driver parity I/O port by Texas Instruments in the AS logic family, supporting even parity generation and odd/even parity checking in a 14-pin DIP package. Key specs: 9-bit parity, 48mA output sink current, active-low parity error output. Available in stock worldwide.
Operation of 4.5V to 5.5V VCC • Inputs accept voltages to 5.5V • Maximum tpd of 9.5ns at 5V • Inputs are TTL-voltage compatible
Quadruple 2-Input Positive-AND Gates
NAND Gate IC 3 Channel 0°C ~ 70°C Voltage - Supply 4.5V ~ 5.5V 14-PDIP
SN74AS11N is a triple 3-input AND gate IC from Texas Instruments, featuring Advanced Schottky (AS) logic with 3 independent gates, 3 inputs each, 14-Pin PDIP package, 4.5V–5.5V supply, 20mA output current. From $2.26, in stock with worldwide shipping.
Octal D-Type Edge-Triggered Flip-Flops With 3-State Outputs,4.5V ~ 5.5V,125 mA,0°C ~ 70°C (TA)
Quadruple 2-Input Positive-AND Gates
Operation of 2V to 6V VCC • Inputs accept voltages to 6V • Max tpd of 9ns at 5V • 3-state inverting outputs drive bus lines directly • Full parallel access for loading • Flow-through architecture to optimize PCB layout
Quadruple 2-Input Positive-AND Gates
Quadruple 2-Input Positive-NAND Gates
DRV8805DW is a stepper motor controller IC from Texas Instruments with 2.3A max output current in a 20-pin SOP package. Supports unipolar and bipolar motors with built-in protection features. From $2.52, in stock with worldwide shipping.
UCD3020RGZT is a fully programmable digital power controller by Texas Instruments, supporting up to two regulated outputs and six DPWM outputs with current/voltage-mode PWM control and 3.3V supply. From $3.54, in stock worldwide shipping.
UCD3020RGZR is a digital power controller IC from Texas Instruments with current/voltage-mode control and PWM technique, supporting 3–3.6V input in a 48-pin VQFN package. From $2.77, in stock with worldwide shipping.
Use the download button to access the TCA6408AQPWRQ1 schematic symbol, PCB footprint, and 3D model.
MSP432P401RIZXHR is a 32-bit ARM Cortex-M4F mixed-signal microcontroller from Texas Instruments, featuring 48 MHz clock, ADC, DMA, and boundary scan in a compact NFBGA-80 package. From $13.33, in stock with worldwide shipping.
SimpleLink™ ultra-low-power 32-Bit ARM Cortex-M4F MCU With 14-bit ADC, 256KB Flash and 64KB RAM
SimpleLink Ultra-Low-Power 32-Bit ARM Cortex-M4F MCU With Precision ADC, 128KB Flash and 32KB RAM
ARM Microcontrollers - MCU SimpleLink Ultra-Low-Power 32-Bit ARM Cortex-M4F MCU With Precision ADC, 256KB Flash and 64KB RAM 100-LQFP -40 to 85
Low Dropout Positive Regulators
LM1086IS-1.8 is a 1.5A low dropout positive voltage regulator with fixed 1.8V output, featuring 1.3V typical dropout voltage and up to 18V input. Ideal for battery-powered systems. From $1.00 in stock, worldwide shipping.
TL082CM is a dual JFET-input wideband operational amplifier from Texas Instruments. Features low bias current (0.0004 µA max), 70 dB CMRR, and internal frequency compensation. Ideal for audio, instrumentation, and signal conditioning. From $0.51 in stock worldwide shipping.
Analog voltage monitor
SCANSTA112SM is a high-performance IEEE 1149.1 JTAG scan bridge multiplexer IC from Texas Instruments, supporting up to 12 TAP ports with flexible chain configuration. Ideal for board-level test, system debug, and multi-device JTAG management. From $11 in stock with worldwide shipping.
SCANSTA111MT is a Texas Instruments IEEE 1149.1 JTAG SCAN bridge IC in a 48-pin TSSOP package, enabling multi-drop JTAG topology with full boundary-scan support. From $7.11, in stock worldwide shipping.
STA Master
Parallel-to-Serial Converter
The SCAN90CP02VY is a 2-channel LVDS crosspoint switch configurable as a 2:1 multiplexer or 1:2 splitter in a 32-pin PQFP package by Texas Instruments. Key specs: 2 channels, LVDS differential signaling, SCAN test support. Available in stock with worldwide shipping.
SCAN12100TYA 100-Pin TQFP
Receiver/Transmitter
Output Operational Amplifiers
Operational Amplifier
CMOS Dual Operational Amplifier
Dual Linear Regulator
Dual Rail Linear Regulator
LP5952TL-1.6 is a dual rail fixed linear regulator from Texas Instruments with 1.6V output, 300mA capability, 88mV dropout voltage, and 6V max input. Ideal for portable and low-power applications.
The LP5952TL-1.5 is a fixed-output 1.5V single-rail low-dropout linear regulator in a tiny 5-ball DSBGA package. Features an ultra-low 88mV dropout voltage, 0.7V to 4.5V input range, and stable output for noise-sensitive analog and RF circuits. Available from stock with worldwide shipping.
LP5952TL-1.3 is a fixed-output dual rail linear regulator from Texas Instruments, delivering 1.3V with 88mV typical dropout voltage and up to 4.5V input. Designed for noise-sensitive applications in compact 5-ball BGA packages with worldwide stock and fast shipping.
Dual Rail Linear Regulator
CMOS Voltage Regulator
CMOS Voltage Regulator
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote