Integrated Circuit

Texas Instruments ISO721 is a single-channel high-speed digital isolator supporting 5V supply operation in an 8-pin SOP package. It provides galvanic isolation for digital logic signals in industrial and medical systems. Suitable for SPI, GPIO, and UART level-shifting across isolation barriers up to 2500 VRMS.

The ISO721DUB is a single-channel digital isolator from Texas Instruments, housed in an 8-pin SOIC package with plastic/epoxy construction. It provides high-voltage galvanic isolation for digital signals and operates with both 3.3 V and 5 V supply voltages, with a 260°C peak reflow temperature rating. Available with worldwide shipping from authorized distributors.

FULL-DUPLEX RS-485 TRANSCEIVERS

Use the download button to access the INA333AIDRGR schematic symbol, PCB footprint, and 3D model.

The INA2321EA/250 is a micropower, single-supply CMOS instrumentation amplifier from Texas Instruments with a 0.5 MHz bandwidth and 80 dB minimum CMRR. It features an ultra-low bias current of 0.00001 µA and 1000 µV maximum input offset voltage in a 14-pin SOIC package. RoHS compliant and available in stock worldwide.

CURRENT SHUNT MONITOR

INA216A3YFFR is a 5 V low-power high-side zero-drift current-shunt monitor in 4-ball WCSP from Texas Instruments. Key specs: 200 V/V gain, 75 µV Vos max, 0 V to 5.5 V common-mode range. From $1.20, in stock with worldwide shipping.

5V, Low-Power, High-side, Zero-Drift, Voltage Output Current Shunt Monitor in WCSP or QFN Package

5V, Low-Power, High-side, Zero-Drift, Voltage Output Current Sense Amp in WCSP package

Automotive, 26-V, Bi-Directional, Zero-Drift, Precision, Low-/High-Side, Volt. Out Current Sense Amp

26V bi-directional zero-drift current sense amplifier with voltage output, 105dB CMRR, 35µA max bias current, ideal for power monitoring and motor control. From $0.39 in stock with worldwide shipping.

26-V, Bi-Directional, Zero-Drift, High Accuracy, Low-/High-Side Current Shunt Monitor with voltage output. Features 100 µV max offset, 100 dB CMRR, and 26 V common-mode range. From $0.70, in stock, worldwide shipping.

CURRENT SHUNT MONITOR

60V, High-Side, Bi-Directional, High-Speed, Current Output Current Sense Amplifier

Use the download button to access the INA148QDRQ1 schematic symbol, PCB footprint, and 3D model.

SOT-23, 5 PIN

Low Power, Single-Supply Difference Amplifier

Enhanced Product Precision, Low Power Instrumentation Amplifiers

SOP,

Quad Telephone Relay Drivers

Use the download button to access the DRV8828PWPR schematic symbol, PCB footprint, and 3D model.

1.6A Bipolar Stepper Motor Driver with 4-Level Current Regulation (PH/EN Ctrl)

DirectPath™, 2-VRMS Line Driver With Adjustable Gain

DirectPath™ 2Vrms Line Driver With Programmable Fixed Gain

DirectPath? 2Vrms Line Driver

3-Vrms DirectPath™ Pop-Free Variable Input Gain Line Driver with Diff Inputs

3-Vrms DirectPath™ Pop-Free Variable Input Gain Line Driver with Diff Inputs

The DRV590DWP is a single-channel H-bridge peripheral driver with integrated PWM control, capable of sourcing a peak output current of 1.22 A in a 20-pin SOP package. It includes built-in overcurrent and thermal protection to safeguard connected loads and the IC itself during fault conditions. Suitable for small DC motor, solenoid, and actuator drive applications requiring PWM speed or position control.

DLP® Configuration PROM for DLPC100

DDC114: Quad Current Input 20-Bit Analog-To-Digital Converter

Use the download button to access the DCR010503U schematic symbol, PCB footprint, and 3D model.

Use the download button to access the DCP020505U schematic symbol, PCB footprint, and 3D model.

Miniature, 1W Isolated Unregulated DC/DC Converters

18-bit, single-channel, low-noise, voltage output DAC for high accuracy applications

10-Bit, 165-MSPS Digital-to-Analog Converter (DAC) - Qualified for Automotive Applications

Use the download button to access the DAC8831MCDREP schematic symbol, PCB footprint, and 3D model.

Use the download button to access the DAC8830MCDREP schematic symbol, PCB footprint, and 3D model.

16-Bit, Dual Serial Input Multiplying Digital-to-Analog Converter

Quad, DAC

Quad, 16-BIT DAC

Octal, 16-Bit, DAC

Texas Instruments DAC8728SPAGR is a 16-bit parallel-input digital-to-analog converter with ±15 V output range and binary or two's complement input format, available in a 64-pin PQFP package. From $18.00 in stock worldwide shipping.

• Relative Accuracy: – DAC7568 (12-Bit): 0.3 LSB INL – DAC8168 (14-Bit): 1 LSB INL – DAC8568 (16-Bit): 4 LSB INL • Glitch Energy: 0.1nV-s • Internal Reference: – 2.5V Reference Voltage (disabled by default) – 0.004% Initial Accuracy (typ) – 2ppm/°C Temperature Drift (typ) – 5ppm/°C Temperature Drift (max) – 20mA Sink/Source Capability • Power-On Reset to Zero Scale or Midscale • Ultralow Power Operation: 1.25mA at 5V Including Internal Reference Current • Wide Power-Supply Range: +2.7V to +5.5

1• Relative Accuracy: – DAC7568 (12-Bit): 0.3 LSB INL – DAC8168 (14-Bit): 1 LSB INL – DAC8568 (16-Bit): 4 LSB INL • Glitch Energy: 0.1nV-s • Internal Reference: – 2.5V Reference Voltage (disabled by default) – 0.004% Initial Accuracy (typ) – 2ppm/°C Temperature Drift (typ) – 5ppm/°C Temperature Drift (max) – 20mA Sink/Source Capability

Quad 14-bit high-accuracy digital-to-analog converter with ±15 V output range and serial input interface. Features ±0.003% max linearity error, 2's complement binary input, available from $26.81 with worldwide shipping.

Quad, 12-Bit DAC

Use the download button to access the DAC8234SPFBR schematic symbol, PCB footprint, and 3D model.

Quad 14-Bit High Accuracy +/-16.5 V Output Serial Input Digital-To-Analog Converter

DAC8228SPAGR is a 14-bit dual-channel parallel DAC from Texas Instruments with ±15V analog output range, 2's complement binary input, and 64-pin PQFP package. From $22.89, in stock with worldwide shipping.

Octal, 14-Bit,DAC